diff options
author | Viresh Kumar <viresh.kumar@linaro.org> | 2017-09-26 15:12:40 -0700 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2017-10-03 02:45:12 +0200 |
commit | 7813dd6fc75fb375d4caf002e7f80a826fc3153a (patch) | |
tree | 37326fb95800c931382c3abda492d207c81aef41 /drivers/base/power/opp/core.c | |
parent | 9e66317d3c92ddaab330c125dfe9d06eee268aff (diff) |
PM / OPP: Move the OPP directory out of power/
The drivers/base/power/ directory is special and contains code related
to power management core like system suspend/resume, hibernation, etc.
It was fine to keep the OPP code inside it when we had just one file for
it, but it is growing now and already has a directory for itself.
Lets move it directly under drivers/ directory, just like cpufreq and
cpuidle.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/base/power/opp/core.c')
-rw-r--r-- | drivers/base/power/opp/core.c | 1747 |
1 files changed, 0 insertions, 1747 deletions
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c deleted file mode 100644 index a6de32530693..000000000000 --- a/drivers/base/power/opp/core.c +++ /dev/null @@ -1,1747 +0,0 @@ -/* - * Generic OPP Interface - * - * Copyright (C) 2009-2010 Texas Instruments Incorporated. - * Nishanth Menon - * Romit Dasgupta - * Kevin Hilman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/clk.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/device.h> -#include <linux/export.h> -#include <linux/regulator/consumer.h> - -#include "opp.h" - -/* - * The root of the list of all opp-tables. All opp_table structures branch off - * from here, with each opp_table containing the list of opps it supports in - * various states of availability. - */ -LIST_HEAD(opp_tables); -/* Lock to allow exclusive modification to the device and opp lists */ -DEFINE_MUTEX(opp_table_lock); - -static void dev_pm_opp_get(struct dev_pm_opp *opp); - -static struct opp_device *_find_opp_dev(const struct device *dev, - struct opp_table *opp_table) -{ - struct opp_device *opp_dev; - - list_for_each_entry(opp_dev, &opp_table->dev_list, node) - if (opp_dev->dev == dev) - return opp_dev; - - return NULL; -} - -static struct opp_table *_find_opp_table_unlocked(struct device *dev) -{ - struct opp_table *opp_table; - - list_for_each_entry(opp_table, &opp_tables, node) { - if (_find_opp_dev(dev, opp_table)) { - _get_opp_table_kref(opp_table); - - return opp_table; - } - } - - return ERR_PTR(-ENODEV); -} - -/** - * _find_opp_table() - find opp_table struct using device pointer - * @dev: device pointer used to lookup OPP table - * - * Search OPP table for one containing matching device. - * - * Return: pointer to 'struct opp_table' if found, otherwise -ENODEV or - * -EINVAL based on type of error. - * - * The callers must call dev_pm_opp_put_opp_table() after the table is used. - */ -struct opp_table *_find_opp_table(struct device *dev) -{ - struct opp_table *opp_table; - - if (IS_ERR_OR_NULL(dev)) { - pr_err("%s: Invalid parameters\n", __func__); - return ERR_PTR(-EINVAL); - } - - mutex_lock(&opp_table_lock); - opp_table = _find_opp_table_unlocked(dev); - mutex_unlock(&opp_table_lock); - - return opp_table; -} - -/** - * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an opp - * @opp: opp for which voltage has to be returned for - * - * Return: voltage in micro volt corresponding to the opp, else - * return 0 - * - * This is useful only for devices with single power supply. - */ -unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) -{ - if (IS_ERR_OR_NULL(opp)) { - pr_err("%s: Invalid parameters\n", __func__); - return 0; - } - - return opp->supplies[0].u_volt; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage); - -/** - * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp - * @opp: opp for which frequency has to be returned for - * - * Return: frequency in hertz corresponding to the opp, else - * return 0 - */ -unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) -{ - if (IS_ERR_OR_NULL(opp) || !opp->available) { - pr_err("%s: Invalid parameters\n", __func__); - return 0; - } - - return opp->rate; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); - -/** - * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not - * @opp: opp for which turbo mode is being verified - * - * Turbo OPPs are not for normal use, and can be enabled (under certain - * conditions) for short duration of times to finish high throughput work - * quickly. Running on them for longer times may overheat the chip. - * - * Return: true if opp is turbo opp, else false. - */ -bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp) -{ - if (IS_ERR_OR_NULL(opp) || !opp->available) { - pr_err("%s: Invalid parameters\n", __func__); - return false; - } - - return opp->turbo; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_is_turbo); - -/** - * dev_pm_opp_get_max_clock_latency() - Get max clock latency in nanoseconds - * @dev: device for which we do this operation - * - * Return: This function returns the max clock latency in nanoseconds. - */ -unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev) -{ - struct opp_table *opp_table; - unsigned long clock_latency_ns; - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return 0; - - clock_latency_ns = opp_table->clock_latency_ns_max; - - dev_pm_opp_put_opp_table(opp_table); - - return clock_latency_ns; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency); - -/** - * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds - * @dev: device for which we do this operation - * - * Return: This function returns the max voltage latency in nanoseconds. - */ -unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) -{ - struct opp_table *opp_table; - struct dev_pm_opp *opp; - struct regulator *reg; - unsigned long latency_ns = 0; - int ret, i, count; - struct { - unsigned long min; - unsigned long max; - } *uV; - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return 0; - - count = opp_table->regulator_count; - - /* Regulator may not be required for the device */ - if (!count) - goto put_opp_table; - - uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL); - if (!uV) - goto put_opp_table; - - mutex_lock(&opp_table->lock); - - for (i = 0; i < count; i++) { - uV[i].min = ~0; - uV[i].max = 0; - - list_for_each_entry(opp, &opp_table->opp_list, node) { - if (!opp->available) - continue; - - if (opp->supplies[i].u_volt_min < uV[i].min) - uV[i].min = opp->supplies[i].u_volt_min; - if (opp->supplies[i].u_volt_max > uV[i].max) - uV[i].max = opp->supplies[i].u_volt_max; - } - } - - mutex_unlock(&opp_table->lock); - - /* - * The caller needs to ensure that opp_table (and hence the regulator) - * isn't freed, while we are executing this routine. - */ - for (i = 0; i < count; i++) { - reg = opp_table->regulators[i]; - ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max); - if (ret > 0) - latency_ns += ret * 1000; - } - - kfree(uV); -put_opp_table: - dev_pm_opp_put_opp_table(opp_table); - - return latency_ns; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency); - -/** - * dev_pm_opp_get_max_transition_latency() - Get max transition latency in - * nanoseconds - * @dev: device for which we do this operation - * - * Return: This function returns the max transition latency, in nanoseconds, to - * switch from one OPP to other. - */ -unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev) -{ - return dev_pm_opp_get_max_volt_latency(dev) + - dev_pm_opp_get_max_clock_latency(dev); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency); - -/** - * dev_pm_opp_get_suspend_opp_freq() - Get frequency of suspend opp in Hz - * @dev: device for which we do this operation - * - * Return: This function returns the frequency of the OPP marked as suspend_opp - * if one is available, else returns 0; - */ -unsigned long dev_pm_opp_get_suspend_opp_freq(struct device *dev) -{ - struct opp_table *opp_table; - unsigned long freq = 0; - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return 0; - - if (opp_table->suspend_opp && opp_table->suspend_opp->available) - freq = dev_pm_opp_get_freq(opp_table->suspend_opp); - - dev_pm_opp_put_opp_table(opp_table); - - return freq; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_suspend_opp_freq); - -/** - * dev_pm_opp_get_opp_count() - Get number of opps available in the opp table - * @dev: device for which we do this operation - * - * Return: This function returns the number of available opps if there are any, - * else returns 0 if none or the corresponding error value. - */ -int dev_pm_opp_get_opp_count(struct device *dev) -{ - struct opp_table *opp_table; - struct dev_pm_opp *temp_opp; - int count = 0; - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) { - count = PTR_ERR(opp_table); - dev_err(dev, "%s: OPP table not found (%d)\n", - __func__, count); - return count; - } - - mutex_lock(&opp_table->lock); - - list_for_each_entry(temp_opp, &opp_table->opp_list, node) { - if (temp_opp->available) - count++; - } - - mutex_unlock(&opp_table->lock); - dev_pm_opp_put_opp_table(opp_table); - - return count; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); - -/** - * dev_pm_opp_find_freq_exact() - search for an exact frequency - * @dev: device for which we do this operation - * @freq: frequency to search for - * @available: true/false - match for available opp - * - * Return: Searches for exact match in the opp table and returns pointer to the - * matching opp if found, else returns ERR_PTR in case of error and should - * be handled using IS_ERR. Error return values can be: - * EINVAL: for bad pointer - * ERANGE: no match found for search - * ENODEV: if device not found in list of registered devices - * - * Note: available is a modifier for the search. if available=true, then the - * match is for exact matching frequency and is available in the stored OPP - * table. if false, the match is for exact frequency which is not available. - * - * This provides a mechanism to enable an opp which is not available currently - * or the opposite as well. - * - * The callers are required to call dev_pm_opp_put() for the returned OPP after - * use. - */ -struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, - unsigned long freq, - bool available) -{ - struct opp_table *opp_table; - struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) { - int r = PTR_ERR(opp_table); - - dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r); - return ERR_PTR(r); - } - - mutex_lock(&opp_table->lock); - - list_for_each_entry(temp_opp, &opp_table->opp_list, node) { - if (temp_opp->available == available && - temp_opp->rate == freq) { - opp = temp_opp; - - /* Increment the reference count of OPP */ - dev_pm_opp_get(opp); - break; - } - } - - mutex_unlock(&opp_table->lock); - dev_pm_opp_put_opp_table(opp_table); - - return opp; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact); - -static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table, - unsigned long *freq) -{ - struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); - - mutex_lock(&opp_table->lock); - - list_for_each_entry(temp_opp, &opp_table->opp_list, node) { - if (temp_opp->available && temp_opp->rate >= *freq) { - opp = temp_opp; - *freq = opp->rate; - - /* Increment the reference count of OPP */ - dev_pm_opp_get(opp); - break; - } - } - - mutex_unlock(&opp_table->lock); - - return opp; -} - -/** - * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq - * @dev: device for which we do this operation - * @freq: Start frequency - * - * Search for the matching ceil *available* OPP from a starting freq - * for a device. - * - * Return: matching *opp and refreshes *freq accordingly, else returns - * ERR_PTR in case of error and should be handled using IS_ERR. Error return - * values can be: - * EINVAL: for bad pointer - * ERANGE: no match found for search - * ENODEV: if device not found in list of registered devices - * - * The callers are required to call dev_pm_opp_put() for the returned OPP after - * use. - */ -struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, - unsigned long *freq) -{ - struct opp_table *opp_table; - struct dev_pm_opp *opp; - - if (!dev || !freq) { - dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); - return ERR_PTR(-EINVAL); - } - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return ERR_CAST(opp_table); - - opp = _find_freq_ceil(opp_table, freq); - - dev_pm_opp_put_opp_table(opp_table); - - return opp; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil); - -/** - * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq - * @dev: device for which we do this operation - * @freq: Start frequency - * - * Search for the matching floor *available* OPP from a starting freq - * for a device. - * - * Return: matching *opp and refreshes *freq accordingly, else returns - * ERR_PTR in case of error and should be handled using IS_ERR. Error return - * values can be: - * EINVAL: for bad pointer - * ERANGE: no match found for search - * ENODEV: if device not found in list of registered devices - * - * The callers are required to call dev_pm_opp_put() for the returned OPP after - * use. - */ -struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, - unsigned long *freq) -{ - struct opp_table *opp_table; - struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); - - if (!dev || !freq) { - dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); - return ERR_PTR(-EINVAL); - } - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return ERR_CAST(opp_table); - - mutex_lock(&opp_table->lock); - - list_for_each_entry(temp_opp, &opp_table->opp_list, node) { - if (temp_opp->available) { - /* go to the next node, before choosing prev */ - if (temp_opp->rate > *freq) - break; - else - opp = temp_opp; - } - } - - /* Increment the reference count of OPP */ - if (!IS_ERR(opp)) - dev_pm_opp_get(opp); - mutex_unlock(&opp_table->lock); - dev_pm_opp_put_opp_table(opp_table); - - if (!IS_ERR(opp)) - *freq = opp->rate; - - return opp; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); - -static int _set_opp_voltage(struct device *dev, struct regulator *reg, - struct dev_pm_opp_supply *supply) -{ - int ret; - - /* Regulator not available for device */ - if (IS_ERR(reg)) { - dev_dbg(dev, "%s: regulator not available: %ld\n", __func__, - PTR_ERR(reg)); - return 0; - } - - dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, - supply->u_volt_min, supply->u_volt, supply->u_volt_max); - - ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, - supply->u_volt, supply->u_volt_max); - if (ret) - dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n", - __func__, supply->u_volt_min, supply->u_volt, - supply->u_volt_max, ret); - - return ret; -} - -static inline int -_generic_set_opp_clk_only(struct device *dev, struct clk *clk, - unsigned long old_freq, unsigned long freq) -{ - int ret; - - ret = clk_set_rate(clk, freq); - if (ret) { - dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, - ret); - } - - return ret; -} - -static int _generic_set_opp_regulator(const struct opp_table *opp_table, - struct device *dev, - unsigned long old_freq, - unsigned long freq, - struct dev_pm_opp_supply *old_supply, - struct dev_pm_opp_supply *new_supply) -{ - struct regulator *reg = opp_table->regulators[0]; - int ret; - - /* This function only supports single regulator per device */ - if (WARN_ON(opp_table->regulator_count > 1)) { - dev_err(dev, "multiple regulators are not supported\n"); - return -EINVAL; - } - - /* Scaling up? Scale voltage before frequency */ - if (freq > old_freq) { - ret = _set_opp_voltage(dev, reg, new_supply); - if (ret) - goto restore_voltage; - } - - /* Change frequency */ - ret = _generic_set_opp_clk_only(dev, opp_table->clk, old_freq, freq); - if (ret) - goto restore_voltage; - - /* Scaling down? Scale voltage after frequency */ - if (freq < old_freq) { - ret = _set_opp_voltage(dev, reg, new_supply); - if (ret) - goto restore_freq; - } - - return 0; - -restore_freq: - if (_generic_set_opp_clk_only(dev, opp_table->clk, freq, old_freq)) - dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", - __func__, old_freq); -restore_voltage: - /* This shouldn't harm even if the voltages weren't updated earlier */ - if (old_supply) - _set_opp_voltage(dev, reg, old_supply); - - return ret; -} - -/** - * dev_pm_opp_set_rate() - Configure new OPP based on frequency - * @dev: device for which we do this operation - * @target_freq: frequency to achieve - * - * This configures the power-supplies and clock source to the levels specified - * by the OPP corresponding to the target_freq. - */ -int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) -{ - struct opp_table *opp_table; - unsigned long freq, old_freq; - struct dev_pm_opp *old_opp, *opp; - struct clk *clk; - int ret, size; - - if (unlikely(!target_freq)) { - dev_err(dev, "%s: Invalid target frequency %lu\n", __func__, - target_freq); - return -EINVAL; - } - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) { - dev_err(dev, "%s: device opp doesn't exist\n", __func__); - return PTR_ERR(opp_table); - } - - clk = opp_table->clk; - if (IS_ERR(clk)) { - dev_err(dev, "%s: No clock available for the device\n", - __func__); - ret = PTR_ERR(clk); - goto put_opp_table; - } - - freq = clk_round_rate(clk, target_freq); - if ((long)freq <= 0) - freq = target_freq; - - old_freq = clk_get_rate(clk); - - /* Return early if nothing to do */ - if (old_freq == freq) { - dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n", - __func__, freq); - ret = 0; - goto put_opp_table; - } - - old_opp = _find_freq_ceil(opp_table, &old_freq); - if (IS_ERR(old_opp)) { - dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n", - __func__, old_freq, PTR_ERR(old_opp)); - } - - opp = _find_freq_ceil(opp_table, &freq); - if (IS_ERR(opp)) { - ret = PTR_ERR(opp); - dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n", - __func__, freq, ret); - goto put_old_opp; - } - - dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__, - old_freq, freq); - - /* Only frequency scaling */ - if (!opp_table->regulators) { - ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); - } else if (!opp_table->set_opp) { - ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq, - IS_ERR(old_opp) ? NULL : old_opp->supplies, - opp->supplies); - } else { - struct dev_pm_set_opp_data *data; - - data = opp_table->set_opp_data; - data->regulators = opp_table->regulators; - data->regulator_count = opp_table->regulator_count; - data->clk = clk; - data->dev = dev; - - data->old_opp.rate = old_freq; - size = sizeof(*opp->supplies) * opp_table->regulator_count; - if (IS_ERR(old_opp)) - memset(data->old_opp.supplies, 0, size); - else - memcpy(data->old_opp.supplies, old_opp->supplies, size); - - data->new_opp.rate = freq; - memcpy(data->new_opp.supplies, opp->supplies, size); - - ret = opp_table->set_opp(data); - } - - dev_pm_opp_put(opp); -put_old_opp: - if (!IS_ERR(old_opp)) - dev_pm_opp_put(old_opp); -put_opp_table: - dev_pm_opp_put_opp_table(opp_table); - return ret; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate); - -/* OPP-dev Helpers */ -static void _remove_opp_dev(struct opp_device *opp_dev, - struct opp_table *opp_table) -{ - opp_debug_unregister(opp_dev, opp_table); - list_del(&opp_dev->node); - kfree(opp_dev); -} - -struct opp_device *_add_opp_dev(const struct device *dev, - struct opp_table *opp_table) -{ - struct opp_device *opp_dev; - int ret; - - opp_dev = kzalloc(sizeof(*opp_dev), GFP_KERNEL); - if (!opp_dev) - return NULL; - - /* Initialize opp-dev */ - opp_dev->dev = dev; - list_add(&opp_dev->node, &opp_table->dev_list); - - /* Create debugfs entries for the opp_table */ - ret = opp_debug_register(opp_dev, opp_table); - if (ret) - dev_err(dev, "%s: Failed to register opp debugfs (%d)\n", - __func__, ret); - - return opp_dev; -} - -static struct opp_table *_allocate_opp_table(struct device *dev) -{ - struct opp_table *opp_table; - struct opp_device *opp_dev; - int ret; - - /* - * Allocate a new OPP table. In the infrequent case where a new - * device is needed to be added, we pay this penalty. - */ - opp_table = kzalloc(sizeof(*opp_table), GFP_KERNEL); - if (!opp_table) - return NULL; - - INIT_LIST_HEAD(&opp_table->dev_list); - - opp_dev = _add_opp_dev(dev, opp_table); - if (!opp_dev) { - kfree(opp_table); - return NULL; - } - - _of_init_opp_table(opp_table, dev); - - /* Find clk for the device */ - opp_table->clk = clk_get(dev, NULL); - if (IS_ERR(opp_table->clk)) { - ret = PTR_ERR(opp_table->clk); - if (ret != -EPROBE_DEFER) - dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, - ret); - } - - BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head); - INIT_LIST_HEAD(&opp_table->opp_list); - mutex_init(&opp_table->lock); - kref_init(&opp_table->kref); - - /* Secure the device table modification */ - list_add(&opp_table->node, &opp_tables); - return opp_table; -} - -void _get_opp_table_kref(struct opp_table *opp_table) -{ - kref_get(&opp_table->kref); -} - -struct opp_table *dev_pm_opp_get_opp_table(struct device *dev) -{ - struct opp_table *opp_table; - - /* Hold our table modification lock here */ - mutex_lock(&opp_table_lock); - - opp_table = _find_opp_table_unlocked(dev); - if (!IS_ERR(opp_table)) - goto unlock; - - opp_table = _allocate_opp_table(dev); - -unlock: - mutex_unlock(&opp_table_lock); - - return opp_table; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_table); - -static void _opp_table_kref_release(struct kref *kref) -{ - struct opp_table *opp_table = container_of(kref, struct opp_table, kref); - struct opp_device *opp_dev; - - /* Release clk */ - if (!IS_ERR(opp_table->clk)) - clk_put(opp_table->clk); - - opp_dev = list_first_entry(&opp_table->dev_list, struct opp_device, - node); - - _remove_opp_dev(opp_dev, opp_table); - - /* dev_list must be empty now */ - WARN_ON(!list_empty(&opp_table->dev_list)); - - mutex_destroy(&opp_table->lock); - list_del(&opp_table->node); - kfree(opp_table); - - mutex_unlock(&opp_table_lock); -} - -void dev_pm_opp_put_opp_table(struct opp_table *opp_table) -{ - kref_put_mutex(&opp_table->kref, _opp_table_kref_release, - &opp_table_lock); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_put_opp_table); - -void _opp_free(struct dev_pm_opp *opp) -{ - kfree(opp); -} - -static void _opp_kref_release(struct kref *kref) -{ - struct dev_pm_opp *opp = container_of(kref, struct dev_pm_opp, kref); - struct opp_table *opp_table = opp->opp_table; - - /* - * Notify the changes in the availability of the operable - * frequency/voltage list. - */ - blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_REMOVE, opp); - opp_debug_remove_one(opp); - list_del(&opp->node); - kfree(opp); - - mutex_unlock(&opp_table->lock); - dev_pm_opp_put_opp_table(opp_table); -} - -static void dev_pm_opp_get(struct dev_pm_opp *opp) -{ - kref_get(&opp->kref); -} - -void dev_pm_opp_put(struct dev_pm_opp *opp) -{ - kref_put_mutex(&opp->kref, _opp_kref_release, &opp->opp_table->lock); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_put); - -/** - * dev_pm_opp_remove() - Remove an OPP from OPP table - * @dev: device for which we do this operation - * @freq: OPP to remove with matching 'freq' - * - * This function removes an opp from the opp table. - */ -void dev_pm_opp_remove(struct device *dev, unsigned long freq) -{ - struct dev_pm_opp *opp; - struct opp_table *opp_table; - bool found = false; - - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return; - - mutex_lock(&opp_table->lock); - - list_for_each_entry(opp, &opp_table->opp_list, node) { - if (opp->rate == freq) { - found = true; - break; - } - } - - mutex_unlock(&opp_table->lock); - - if (found) { - dev_pm_opp_put(opp); - } else { - dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n", - __func__, freq); - } - - dev_pm_opp_put_opp_table(opp_table); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_remove); - -struct dev_pm_opp *_opp_allocate(struct opp_table *table) -{ - struct dev_pm_opp *opp; - int count, supply_size; - - /* Allocate space for at least one supply */ - count = table->regulator_count ? table->regulator_count : 1; - supply_size = sizeof(*opp->supplies) * count; - - /* allocate new OPP node and supplies structures */ - opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL); - if (!opp) - return NULL; - - /* Put the supplies at the end of the OPP structure as an empty array */ - opp->supplies = (struct dev_pm_opp_supply *)(opp + 1); - INIT_LIST_HEAD(&opp->node); - - return opp; -} - -static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, - struct opp_table *opp_table) -{ - struct regulator *reg; - int i; - - for (i = 0; i < opp_table->regulator_count; i++) { - reg = opp_table->regulators[i]; - - if (!regulator_is_supported_voltage(reg, - opp->supplies[i].u_volt_min, - opp->supplies[i].u_volt_max)) { - pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n", - __func__, opp->supplies[i].u_volt_min, - opp->supplies[i].u_volt_max); - return false; - } - } - - return true; -} - -/* - * Returns: - * 0: On success. And appropriate error message for duplicate OPPs. - * -EBUSY: For OPP with same freq/volt and is available. The callers of - * _opp_add() must return 0 if they receive -EBUSY from it. This is to make - * sure we don't print error messages unnecessarily if different parts of - * kernel try to initialize the OPP table. - * -EEXIST: For OPP with same freq but different volt or is unavailable. This - * should be considered an error by the callers of _opp_add(). - */ -int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, - struct opp_table *opp_table) -{ - struct dev_pm_opp *opp; - struct list_head *head; - int ret; - - /* - * Insert new OPP in order of increasing frequency and discard if - * already present. - * - * Need to use &opp_table->opp_list in the condition part of the 'for' - * loop, don't replace it with head otherwise it will become an infinite - * loop. - */ - mutex_lock(&opp_table->lock); - head = &opp_table->opp_list; - - list_for_each_entry(opp, &opp_table->opp_list, node) { - if (new_opp->rate > opp->rate) { - head = &opp->node; - continue; - } - - if (new_opp->rate < opp->rate) - break; - - /* Duplicate OPPs */ - dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", - __func__, opp->rate, opp->supplies[0].u_volt, - opp->available, new_opp->rate, - new_opp->supplies[0].u_volt, new_opp->available); - - /* Should we compare voltages for all regulators here ? */ - ret = opp->available && - new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? -EBUSY : -EEXIST; - - mutex_unlock(&opp_table->lock); - return ret; - } - - list_add(&new_opp->node, head); - mutex_unlock(&opp_table->lock); - - new_opp->opp_table = opp_table; - kref_init(&new_opp->kref); - - /* Get a reference to the OPP table */ - _get_opp_table_kref(opp_table); - - ret = opp_debug_create_one(new_opp, opp_table); - if (ret) - dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n", - __func__, ret); - - if (!_opp_supported_by_regulators(new_opp, opp_table)) { - new_opp->available = false; - dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n", - __func__, new_opp->rate); - } - - return 0; -} - -/** - * _opp_add_v1() - Allocate a OPP based on v1 bindings. - * @opp_table: OPP table - * @dev: device for which we do this operation - * @freq: Frequency in Hz for this OPP - * @u_volt: Voltage in uVolts for this OPP - * @dynamic: Dynamically added OPPs. - * - * This function adds an opp definition to the opp table and returns status. - * The opp is made available by default and it can be controlled using - * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove. - * - * NOTE: "dynamic" parameter impacts OPPs added by the dev_pm_opp_of_add_table - * and freed by dev_pm_opp_of_remove_table. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - */ -int _opp_add_v1(struct opp_table *opp_table, struct device *dev, - unsigned long freq, long u_volt, bool dynamic) -{ - struct dev_pm_opp *new_opp; - unsigned long tol; - int ret; - - new_opp = _opp_allocate(opp_table); - if (!new_opp) - return -ENOMEM; - - /* populate the opp table */ - new_opp->rate = freq; - tol = u_volt * opp_table->voltage_tolerance_v1 / 100; - new_opp->supplies[0].u_volt = u_volt; - new_opp->supplies[0].u_volt_min = u_volt - tol; - new_opp->supplies[0].u_volt_max = u_volt + tol; - new_opp->available = true; - new_opp->dynamic = dynamic; - - ret = _opp_add(dev, new_opp, opp_table); - if (ret) { - /* Don't return error for duplicate OPPs */ - if (ret == -EBUSY) - ret = 0; - goto free_opp; - } - - /* - * Notify the changes in the availability of the operable - * frequency/voltage list. - */ - blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADD, new_opp); - return 0; - -free_opp: - _opp_free(new_opp); - - return ret; -} - -/** - * dev_pm_opp_set_supported_hw() - Set supported platforms - * @dev: Device for which supported-hw has to be set. - * @versions: Array of hierarchy of versions to match. - * @count: Number of elements in the array. - * - * This is required only for the V2 bindings, and it enables a platform to - * specify the hierarchy of versions it supports. OPP layer will then enable - * OPPs, which are available for those versions, based on its 'opp-supported-hw' - * property. - */ -struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, - const u32 *versions, unsigned int count) -{ - struct opp_table *opp_table; - int ret; - - opp_table = dev_pm_opp_get_opp_table(dev); - if (!opp_table) - return ERR_PTR(-ENOMEM); - - /* Make sure there are no concurrent readers while updating opp_table */ - WARN_ON(!list_empty(&opp_table->opp_list)); - - /* Do we already have a version hierarchy associated with opp_table? */ - if (opp_table->supported_hw) { - dev_err(dev, "%s: Already have supported hardware list\n", - __func__); - ret = -EBUSY; - goto err; - } - - opp_table->supported_hw = kmemdup(versions, count * sizeof(*versions), - GFP_KERNEL); - if (!opp_table->supported_hw) { - ret = -ENOMEM; - goto err; - } - - opp_table->supported_hw_count = count; - - return opp_table; - -err: - dev_pm_opp_put_opp_table(opp_table); - - return ERR_PTR(ret); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw); - -/** - * dev_pm_opp_put_supported_hw() - Releases resources blocked for supported hw - * @opp_table: OPP table returned by dev_pm_opp_set_supported_hw(). - * - * This is required only for the V2 bindings, and is called for a matching - * dev_pm_opp_set_supported_hw(). Until this is called, the opp_table structure - * will not be freed. - */ -void dev_pm_opp_put_supported_hw(struct opp_table *opp_table) -{ - /* Make sure there are no concurrent readers while updating opp_table */ - WARN_ON(!list_empty(&opp_table->opp_list)); - - if (!opp_table->supported_hw) { - pr_err("%s: Doesn't have supported hardware list\n", - __func__); - return; - } - - kfree(opp_table->supported_hw); - opp_table->supported_hw = NULL; - opp_table->supported_hw_count = 0; - - dev_pm_opp_put_opp_table(opp_table); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw); - -/** - * dev_pm_opp_set_prop_name() - Set prop-extn name - * @dev: Device for which the prop-name has to be set. - * @name: name to postfix to properties. - * - * This is required only for the V2 bindings, and it enables a platform to - * specify the extn to be used for certain |