Merge tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "First off, the ACPICA code in the kernel is updated to upstream
  revision 20160831 that brings in a few bug fixes and cleanups. In
  particular, it is possible to mask GPEs now (and the sysfs interface
  for GPE control is fixed on top of that), problems related to the
  table loading mechanism are fixed and all code related to FADT version
  2 (which has never been part of the ACPI specification) is dropped.

  On the new features front, there is a new watchdog driver based on the
  ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to
  replace the iTCO watchdog that doesn't work there, and some UART
  devices get new definitions of built-in properties (to be accessed via
  the generic device properties API).

  Also, included is a fix for an ACPI-related PCI resorces allocation
  issue and a few problems in the EC driver and in the button and
  battery drivers are fixed.

  In addition to that, the ACPI CPPC library is updated to make batching
  of requests sent over the PCC channel possible (which reduces the PCC
  usage overhead substantially in some cases) and to support functional
  fixed hardware (FFH) type of CPPC registers access (which will allow
  CPPC to be used on x86 too in the future).

  As usual, there are some assorted fixes and cleanups too.

  Specifics:

   - Update of the ACPICA code in the kernel to upstream revision
     20160831 with the following major changes:

      * New mechanism for GPE masking.
      * Fixes for issues related to the LoadTable operator and table
        loading.
      * Fixes for issues related to so-called module-level code (MLC),
        that is AML that doesn't belong to any methods.
      * Change of the return value of the _OSI method to reflect the
        Windows behavior.
      * GAS (Generic Address Structure) support fix related to 32-bit
        FADT addresses.
      * Elimination of unnecessary FADT version 2 support.
      * ACPI tools fixes and cleanups.

     From Bob Moore, Lv Zheng, and Jung-uk Kim.

   - ACPI sysfs interface updates to fix GPE handling (on top of the new
     GPE masking mechanism in ACPICA) and issues related to table
     loading (Lv Zheng).

   - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action
     Table), needed on some platforms to replace the iTCO watchdog that
     doesn't work there and related updates of the intel_pmc_ipc,
     i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg).

   - Driver core fix to prevent it from leaking secondary fwnode objects
     during device removal (Lukas Wunner).

   - New definitions of built-in properties for UART in ACPI-based x86
     SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC
     (Heikki Krogerus).

   - New device ID for the Vulcan SPI controller and constification of
     local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel,
     Julia Lawall).

   - Fix for a bug causing the allocation of PCI resorces to fail if
     ACPI-enumerated child platform devices are registered below the PCI
     devices in question (Mika Westerberg).

   - Change of the default polarity for PCI legacy IRQs to high on
     systems booting wth ACPI on platforms with a GIC interrupt
     controller model fixing the discrepancy between the specification
     and HW behavior (Lorenzo Pieralisi).

   - Fixes for the handling of system suspend/resume in the ACPI EC
     driver and update of that driver to make it cope with the cases
     when the EC device defined in the ECDT has to be used throughout
     the entire system life cycle (Lv Zheng).

   - Update of the ACPI CPPC library to allow it to batch requests sent
     over the PCC channel (to reduce overhead), to support the fixed
     functional hardware (FFH) CPPC registers access type, to notify the
     mailbox framework about TX completions when the interrupt flag is
     set for the PCC mailbox, and to support HW-Reduced Communication
     Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas
     Pandruvada, Hoan Tran).

   - ACPI button driver fix and documentation update related to the
     handling of laptop lids (Lv Zheng).

   - ACPI battery driver initialization fix (Carlos Garnacho).

   - ACPI GPIO enumeration documentation update (Mika Westerberg).

   - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv
     Zheng).

   - Assorted cleanups of the ACPI table parsing code and the
     x86-specific ACPI code (Al Stone).

   - Fixes for assorted ACPI-related issues found in linux-next (Wei
     Yongjun)"

* tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits)
  ACPI / documentation: Use recommended name in GPIO property names
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPI / watchdog: Add support for WDAT hardware watchdog
  ACPI / platform: Pay attention to parent device's resources
  PCI: Add pci_find_resource()
  ACPI / CPPC: Support PCC with interrupt flag
  ACPI / sysfs: Update sysfs signature handling code
  ACPI / sysfs: Fix an issue for LoadTable opcode
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPI / tables: Remove duplicated include from tables.c
  ACPI / APD: constify local structures
  x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
  x86: ACPI: remove extraneous white space after semicolon
  ...

81 files changed, 2840 insertions, 1259 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 445ce28475b3..696c6f74a9c7 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -227,7 +227,6 @@ config ACPI_MCFG
 config ACPI_CPPC_LIB
 	bool
 	depends on ACPI_PROCESSOR
-	depends on !ACPI_CPU_FREQ_PSS
 	select MAILBOX
 	select PCC
 	help
@@ -462,6 +461,9 @@ source "drivers/acpi/nfit/Kconfig"
 source "drivers/acpi/apei/Kconfig"
 source "drivers/acpi/dptf/Kconfig"
 
+config ACPI_WATCHDOG
+	bool
+
 config ACPI_EXTLOG
 	tristate "Extended Error Log support"
 	depends on X86_MCE && X86_LOCAL_APIC
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5ae9d85c5159..3a1fa8f03749 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -56,6 +56,7 @@ acpi-$(CONFIG_ACPI_NUMA)	+= numa.o
 acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
 acpi-y				+= acpi_lpat.o
 acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o
+acpi-$(CONFIG_ACPI_WATCHDOG)	+= acpi_watchdog.o
 
 # These are (potentially) separate modules
 
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 1daf9c46df8e..d58fbf7f04e6 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -42,6 +42,7 @@ struct apd_private_data;
 struct apd_device_desc {
 	unsigned int flags;
 	unsigned int fixed_clk_rate;
+	struct property_entry *properties;
 	int (*setup)(struct apd_private_data *pdata);
 };
 
@@ -71,22 +72,35 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
 }
 
 #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
-static struct apd_device_desc cz_i2c_desc = {
+static const struct apd_device_desc cz_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 133000000,
 };
 
-static struct apd_device_desc cz_uart_desc = {
+static struct property_entry uart_properties[] = {
+	PROPERTY_ENTRY_U32("reg-io-width", 4),
+	PROPERTY_ENTRY_U32("reg-shift", 2),
+	PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
+	{ },
+};
+
+static const struct apd_device_desc cz_uart_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 48000000,
+	.properties = uart_properties,
 };
 #endif
 
 #ifdef CONFIG_ARM64
-static struct apd_device_desc xgene_i2c_desc = {
+static const struct apd_device_desc xgene_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 100000000,
 };
+
+static const struct apd_device_desc vulcan_spi_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 133000000,
+};
 #endif
 
 #else
@@ -125,6 +139,12 @@ static int acpi_apd_create_device(struct acpi_device *adev,
 			goto err_out;
 	}
 
+	if (dev_desc->properties) {
+		ret = device_add_properties(&adev->dev, dev_desc->properties);
+		if (ret)
+			goto err_out;
+	}
+
 	adev->driver_data = pdata;
 	pdev = acpi_create_platform_device(adev);
 	if (!IS_ERR_OR_NULL(pdev))
@@ -149,6 +169,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 #endif
 #ifdef CONFIG_ARM64
 	{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
+	{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
 #endif
 	{ }
 };
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 357a0b8f860b..552010288135 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -75,6 +75,7 @@ struct lpss_device_desc {
 	const char *clk_con_id;
 	unsigned int prv_offset;
 	size_t prv_size_override;
+	struct property_entry *properties;
 	void (*setup)(struct lpss_private_data *pdata);
 };
 
@@ -163,11 +164,19 @@ static const struct lpss_device_desc lpt_i2c_dev_desc = {
 	.prv_offset = 0x800,
 };
 
+static struct property_entry uart_properties[] = {
+	PROPERTY_ENTRY_U32("reg-io-width", 4),
+	PROPERTY_ENTRY_U32("reg-shift", 2),
+	PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
+	{ },
+};
+
 static const struct lpss_device_desc lpt_uart_dev_desc = {
 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
 	.clk_con_id = "baudclk",
 	.prv_offset = 0x800,
 	.setup = lpss_uart_setup,
+	.properties = uart_properties,
 };
 
 static const struct lpss_device_desc lpt_sdio_dev_desc = {
@@ -189,6 +198,7 @@ static const struct lpss_device_desc byt_uart_dev_desc = {
 	.clk_con_id = "baudclk",
 	.prv_offset = 0x800,
 	.setup = lpss_uart_setup,
+	.properties = uart_properties,
 };
 
 static const struct lpss_device_desc bsw_uart_dev_desc = {
@@ -197,6 +207,7 @@ static const struct lpss_device_desc bsw_uart_dev_desc = {
 	.clk_con_id = "baudclk",
 	.prv_offset = 0x800,
 	.setup = lpss_uart_setup,
+	.properties = uart_properties,
 };
 
 static const struct lpss_device_desc byt_spi_dev_desc = {
@@ -440,6 +451,12 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
 		goto err_out;
 	}
 
+	if (dev_desc->properties) {
+		ret = device_add_properties(&adev->dev, dev_desc->properties);
+		if (ret)
+			goto err_out;
+	}
+
 	adev->driver_data = pdata;
 	pdev = acpi_create_platform_device(adev);
 	if (!IS_ERR_OR_NULL(pdev)) {
diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
index 159f7f19abce..b200ae1f3c6f 100644
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 
 #include "internal.h"
@@ -30,6 +31,22 @@ static const struct acpi_device_id forbidden_id_list[] = {
 	{"", 0},
 };
 
+static void acpi_platform_fill_resource(struct acpi_device *adev,
+	const struct resource *src, struct resource *dest)
+{
+	struct device *parent;
+
+	*dest = *src;
+
+	/*
+	 * If the device has parent we need to take its resources into
+	 * account as well because this device might consume part of those.
+	 */
+	parent = acpi_get_first_physical_node(adev->parent);
+	if (parent && dev_is_pci(parent))
+		dest->parent = pci_find_resource(to_pci_dev(parent), dest);
+}
+
 /**
  * acpi_create_platform_device - Create platform device for ACPI device node
  * @adev: ACPI device node to create a platform device for.
@@ -70,7 +87,8 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
 		}
 		count = 0;
 		list_for_each_entry(rentry, &resource_list, node)
-			resources[count++] = *rentry->res;
+			acpi_platform_fill_resource(adev, rentry->res,
+						    &resources[count++]);
 
 		acpi_dev_free_resource_list(&resource_list);
 	}
diff --git a/drivers/acpi/acpi_watchdog.c b/drivers/acpi/acpi_watchdog.c
new file mode 100644
index 000000000000..13caebd679f5
--- /dev/null
+++ b/drivers/acpi/acpi_watchdog.c
@@ -0,0 +1,123 @@
+/*
+ * ACPI watchdog table parsing support.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "ACPI: watchdog: " fmt
+
+#include <linux/acpi.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include "internal.h"
+
+/**
+ * Returns true if this system should prefer ACPI based watchdog instead of
+ * the native one (which are typically the same hardware).
+ */
+bool acpi_has_watchdog(void)
+{
+	struct acpi_table_header hdr;
+
+	if (acpi_disabled)
+		return false;
+
+	return ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_WDAT, 0, &hdr));
+}
+EXPORT_SYMBOL_GPL(acpi_has_watchdog);
+
+void __init acpi_watchdog_init(void)
+{
+	const struct acpi_wdat_entry *entries;
+	const struct acpi_table_wdat *wdat;
+	struct list_head resource_list;
+	struct resource_entry *rentry;
+	struct platform_device *pdev;
+	struct resource *resources;
+	size_t nresources = 0;
+	acpi_status status;
+	int i;
+
+	status = acpi_get_table(ACPI_SIG_WDAT, 0,
+				(struct acpi_table_header **)&wdat);
+	if (ACPI_FAILURE(status)) {
+		/* It is fine if there is no WDAT */
+		return;
+	}
+
+	/* Watchdog disabled by BIOS */
+	if (!(wdat->flags & ACPI_WDAT_ENABLED))
+		return;
+
+	/* Skip legacy PCI WDT devices */
+	if (wdat->pci_segment != 0xff || wdat->pci_bus != 0xff ||
+	    wdat->pci_device != 0xff || wdat->pci_function != 0xff)
+		return;
+
+	INIT_LIST_HEAD(&resource_list);
+
+	entries = (struct acpi_wdat_entry *)(wdat + 1);
+	for (i = 0; i < wdat->entries; i++) {
+		const struct acpi_generic_address *gas;
+		struct resource_entry *rentry;
+		struct resource res;
+		bool found;
+
+		gas = &entries[i].register_region;
+
+		res.start = gas->address;
+		if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+			res.flags = IORESOURCE_MEM;
+			res.end = res.start + ALIGN(gas->access_width, 4);
+		} else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+			res.flags = IORESOURCE_IO;
+			res.end = res.start + gas->access_width;
+		} else {
+			pr_warn("Unsupported address space: %u\n",
+				gas->space_id);
+			goto fail_free_resource_list;
+		}
+
+		found = false;
+		resource_list_for_each_entry(rentry, &resource_list) {
+			if (resource_contains(rentry->res, &res)) {
+				found = true;
+				break;
+			}
+		}
+
+		if (!found) {
+			rentry = resource_list_create_entry(NULL, 0);
+			if (!rentry)
+				goto fail_free_resource_list;
+
+			*rentry->res = res;
+			resource_list_add_tail(rentry, &resource_list);
+			nresources++;
+		}
+	}
+
+	resources = kcalloc(nresources, sizeof(*resources), GFP_KERNEL);
+	if (!resources)
+		goto fail_free_resource_list;
+
+	i = 0;
+	resource_list_for_each_entry(rentry, &resource_list)
+		resources[i++] = *rentry->res;
+
+	pdev = platform_device_register_simple("wdat_wdt", PLATFORM_DEVID_NONE,
+					       resources, nresources);
+	if (IS_ERR(pdev))
+		pr_err("Failed to create platform device\n");
+
+	kfree(resources);
+
+fail_free_resource_list:
+	resource_list_free(&resource_list);
+}
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 227bb7bb19d7..32d93edbc479 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -175,6 +175,7 @@ acpi-y +=		\
 	utresrc.o	\
 	utstate.o	\
 	utstring.o	\
+	utstrtoul64.o	\
 	utxface.o	\
 	utxfinit.o	\
 	utxferror.o	\
diff --git a/drivers/acpi/acpica/acapps.h b/drivers/acpi/acpica/acapps.h
index ca2c0607104b..0bd6307e1f3c 100644
--- a/drivers/acpi/acpica/acapps.h
+++ b/drivers/acpi/acpica/acapps.h
@@ -44,7 +44,9 @@
 #ifndef _ACAPPS
 #define _ACAPPS
 
-#include <stdio.h>
+#ifdef ACPI_USE_STANDARD_HEADERS
+#include <sys/stat.h>
+#endif				/* ACPI_USE_STANDARD_HEADERS */
 
 /* Common info for tool signons */
 
@@ -81,13 +83,13 @@
 /* Macros for usage mess