Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "People are back from the holiday breaks, and it shows.  Here are a
  bunch of fixes for a number of platforms:
   - A couple of small fixes for Nomadik
   - A larger set of changes for kirkwood/mvebu
     - uart driver selection, dt clocks, gpio-poweroff fixups, a few
       __init annotation fixes and some error handling improvement in
       their xor dma driver.
   - i.MX had a couple of minor fixes (and a critical one for flexcan2
     clock setup)
   - MXS has a small board fix and a framebuffer bugfix
   - A set of fixes for Samsung Exynos, fixing default bootargs and some
     Exynos5440 clock issues
   - A set of OMAP changes including PM fixes and a few sparse warning
     fixups

  All in all a bit more positive code delta than we'd ideally want to
  see here, mostly from the OMAP PM changes, but nothing overly crazy."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  ...

43 files changed, 305 insertions, 137 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95ba14ae3d0..ab864d9545dd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,7 +371,6 @@ config ARCH_CNS3XXX
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index cf6c48a09eac..4c0abe85405f 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -50,17 +50,19 @@
 		ranges;
 
 		serial@d0012000 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012100 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index c45c7b4dc352..271855a6e224 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -34,7 +34,14 @@
 		reg = <0>;
 		clocks = <&cpuclk 0>;
 	    };
-	}
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
 
 	soc {
 		pinctrl {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index a2aee5707377..1c1937dbce73 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -85,5 +85,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index da03a129243a..4905cf3a5ef8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -100,5 +100,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
  };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 367aa3f94912..2e37ef101c90 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -42,17 +42,19 @@
 
 	soc {
 		serial@d0012200 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012300 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 
@@ -93,14 +95,6 @@
 				status = "disabled";
 		};
 
-		ethernet@d0034000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-		};
-
 		xor@d0060900 {
 			compatible = "marvell,orion-xor";
 			reg = <0xd0060900 0x100
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index f3f7e9d8adca..42eac1ff3cc8 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -117,6 +117,7 @@
 		pinctrl: pinctrl@d0200 {
 			compatible = "marvell,dove-pinctrl";
 			reg = <0xd0200 0x10>;
+			clocks = <&gate_clk 22>;
 		};
 
 		spi0: spi@10600 {
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 46477ac1de99..139b40cc3a23 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -32,6 +32,7 @@
 
 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <0>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -39,6 +40,7 @@
 
 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <1>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -46,6 +48,7 @@
 
 		cpu@2 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -53,6 +56,7 @@
 
 		cpu@3 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <3>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 9b23a8255e39..f63490707f3a 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2e3b6efaf1a2..3acf594ea60b 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -574,7 +574,7 @@
 
 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
-		reg = <0x14530000 0x100000>;
+		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 921c83cf694f..81e2c964a900 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
 	};
 
 	spi {
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index a9ae5d32e80d..5927a8df5625 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -30,33 +30,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu@900 {
 			compatible = "arm,cortex-a9";
-			reg = <0>;
+			device_type = "cpu";
+			reg = <0x900>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@1 {
+		cpu@901 {
 			compatible = "arm,cortex-a9";
-			reg = <1>;
+			device_type = "cpu";
+			reg = <0x901>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@2 {
+		cpu@902 {
 			compatible = "arm,cortex-a9";
-			reg = <2>;
+			device_type = "cpu";
+			reg = <0x902>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@3 {
+		cpu@903 {
 			compatible = "arm,cortex-a9";
-			reg = <3>;
+			device_type = "cpu";
+			reg = <0x903>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7c43b8e70b9f..e7484e4ea659 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -39,17 +39,17 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 
-				led_pin_gpio0_17: led_gpio0_17@0 {
+				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -110,7 +110,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio0_17>;
+		pinctrl-0 = <&led_pin_gpio2_1>;
 
 		user {
 			label = "green";
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 24731cb78e8e..7f67402328d3 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "fsl,imx31-bug", "fsl,imx31";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
 
 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 552aed4ff982..edc3f1eb6699 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -492,7 +492,7 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
-				clocks = <&clks 158>, <&clks 157>;
+				clocks = <&clks 87>, <&clks 86>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 9ae2004d5675..4ccea2130a6c 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -39,6 +39,7 @@
 			#size-cells = <0>;
 			interrupts = <32>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index c0de5a7f660d..cd15452a52a6 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -82,4 +82,21 @@
 			gpios = <&gpio1 16 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 7735cee4a9c6..110d6cbb795b 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -144,6 +144,7 @@
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
+			clocks = <&gate_clk 3>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index a702fb345c01..b5bc96cb65a7 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -33,9 +33,7 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_MV64XXX=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 91d5b6f1d5af..e103c290bc9e 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -74,6 +74,8 @@ config SOC_EXYNOS5440
 	depends on ARCH_EXYNOS5
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
+	select PINCTRL
+	select PINCTRL_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index d6d0dc651089..1a89824a5f78 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
 
+	/* EXYNOS5440 can support only common clock framework */
+
+	if (soc_is_exynos5440())
+		return;
+
+#ifdef CONFIG_SOC_EXYNOS5250
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
 
 	exynos5_register_clocks();
 	exynos5_setup_clocks();
+#endif
 }
 
 #define COMBINER_ENABLE_SET	0x0
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc248167d206..981dc1e1da51 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
 
 static void highbank_power_off(void)
 {
-	hignbank_set_pwr_shutdown();
+	highbank_set_pwr_shutdown();
 
 	while (1)
 		cpu_do_idle();
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index 7b60faccd551..f30c52843396 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
-	highbank_set_cpu_jump(cpu, secondary_startup);
+	highbank_set_cpu_jump(cpu, phys_to_virt(0));
 	highbank_set_core_pwr();
 
 	cpu_do_idle();
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index 1129957f6c1d..4ecc864ac8b9 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
 
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+	highbank_set_cpu_jump(cpu, secondary_startup);
 	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
 }
@@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
 
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	if (scu_base_addr)
 		scu_enable(scu_base_addr);
-
-	/*
-	 * Write the address of secondary startup into the jump table
-	 * The cores are in wfi and wait until they receive a soft interrupt
-	 * and a non-zero value to jump to. Then the secondary CPU branches
-	 * to this address.
-	 */
-	for (i = 1; i < max_cpus; i++)
-		highbank_set_cpu_jump(i, secondary_startup);
 }
 
 struct smp_operations highbank_smp_ops __initdata = {
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 74aa135966f0..04eddb4f4380 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -14,10 +14,12 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/suspend.h>
 
+#include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 
@@ -26,16 +28,31 @@
 
 static int highbank_suspend_finish(unsigned long val)
 {
+	outer_flush_all();
+	outer_disable();
+
+	highbank_set_pwr_suspend();
+
 	cpu_do_idle();
+
+	highbank_clear_pwr_request();
 	return 0;
 }
 
 static int highbank_pm_enter(suspend_state_t state)
 {
-	hignbank_set_pwr_suspend();
+	cpu_pm_enter();
+	cpu_cluster_pm_enter();
+
 	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
+	cpu_cluster_pm_exit();
+	cpu_pm_exit();
+
+	highbank_smc1(0x102, 0x1);
+	if (scu_base_addr)
+		scu_enable(scu_base_addr);
 	return 0;
 }
 
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
index e13e8ea7c6cb..70af9d13fcef 100644
--- a/arch/arm/mach-highbank/sysregs.h
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
 		writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
 }
 
-static inline void hignbank_set_pwr_suspend(void)
+static inline void highbank_clear_core_pwr(void)
+{
+	int cpu = cpu_logical_map(smp_processor_id());
+	if (scu_base_addr)
+		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
+	else
+		writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
+}
+
+static inline void highbank_set_pwr_suspend(void)
 {
 	writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_shutdown(void)
+static inline void highbank_set_pwr_shutdown(void)
 {
 	writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_soft_reset(void)
+static inline void highbank_set_pwr_soft_reset(void)
 {
 	writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_hard_reset(void)
+static inline void highbank_set_pwr_hard_reset(void)
 {
 	writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
+static inline void highbank_clear_pwr_request(void)
+{
+	writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
+	highbank_clear_core_pwr();
+}
+
 #endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index aed96ad9bd4a..37d8384dcf19 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -22,9 +22,9 @@
 void highbank_restart(char mode, const char *cmd)
 {
 	if (mode == 'h')
-		hignbank_set_pwr_hard_reset();
+		highbank_set_pwr_hard_reset();
 	else
-		hignbank_set_pwr_soft_reset();
+		highbank_set_pwr_soft_reset();
 
 	while (1)
 		cpu_do_idle();
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index ff4150a2ad05..de4fd2bb1e27 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
 			 of_clk_get_from_provider(&clkspec));
 
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
+			 of_clk_get_from_provider(&clkspec));
+
 }
 
 static void __init kirkwood_of_clk_init(void)
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index 15e69fcde9f4..23d2dd1b1b1e 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
 	0
 };
 
-#define TOPKICK_SATA0_PWR_ENABLE 36
-
 void __init usi_topkick_init(void)
 {
 	/*
@@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
 	 */
 	kirkwood_mpp_conf(topkick_mpp_config);
 
-	/* SATA0 power enable */
-	gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
 
 	kirkwood_ge00_init(&topkick_ge00_data);
 	kirkwood_sdio_init(&topkick_mvsdio_data);
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 98167a4319f7..9f19069248da 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index b549d0571548..215f8cdb4004 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -22,49 +22,49 @@
 
 #include <mach/hardware.h>
 
-#define IRQ_VIC_START		1	/* first VIC interrupt is 1