Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

New feature development

This adds support for new features, and contains stuff from most
platforms. A number of these patches could have fit into other
branches, too, but were small enough not to cause too much
confusion here.

* tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mfd/db8500-prcmu: remove support for early silicon revisions
  ARM: ux500: fix the smp_twd clock calculation
  ARM: ux500: remove support for early silicon revisions
  ARM: ux500: update register files
  ARM: ux500: register DB5500 PMU dynamically
  ARM: ux500: update ASIC detection for U5500
  ARM: ux500: support DB8520
  ARM: picoxcell: implement watchdog restart
  ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C
  ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3
  ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3
  ARM: Orion: Remove address map info from all platform data structures
  ARM: Orion: Get address map from plat-orion instead of via platform_data
  ARM: Orion: mbus_dram_info consolidation
  ARM: Orion: Consolidate the address map setup
  ARM: Kirkwood: Add configuration for MPP12 as GPIO
  ARM: Kirkwood: Recognize A1 revision of 6282 chip
  ARM: ux500: update the MOP500 GPIO assignments
  ...

66 files changed, 1370 insertions, 920 deletions

diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index aeb1a7578fad..305635bd45c0 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -194,5 +194,17 @@
 			reg = <0xfff3d000 0x1000>;
 			interrupts = <0 92 4>;
 		};
+
+		ethernet@fff50000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff50000 0x1000>;
+			interrupts = <0 77 4  0 78 4  0 79 4>;
+		};
+
+		ethernet@fff51000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff51000 0x1000>;
+			interrupts = <0 80 4  0 81 4  0 82 4>;
+		};
 	};
 };
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 945a34f2a34d..dde2a1af7b39 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_182MHZ=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y
 CONFIG_OMAP_CF=y
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 00861139101d..008772e3b843 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -31,19 +31,12 @@ static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clockfw_lock);
 
-static unsigned psc_domain(struct clk *clk)
-{
-	return (clk->flags & PSC_DSP)
-		? DAVINCI_GPSC_DSPDOMAIN
-		: DAVINCI_GPSC_ARMDOMAIN;
-}
-
 static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
 				true, clk->flags);
 }
 
@@ -53,7 +46,7 @@ static void __clk_disable(struct clk *clk)
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
 	    (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
 				false, clk->flags);
 	if (clk->parent)
 		__clk_disable(clk->parent);
@@ -237,7 +230,7 @@ static int __init clk_disable_unused(void)
 
 		pr_debug("Clocks: disable unused %s\n", ck->name);
 
-		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
+		davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc,
 				false, ck->flags);
 	}
 	spin_unlock_irq(&clockfw_lock);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index a705f367a84d..46f0f1bf1a4c 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -93,6 +93,7 @@ struct clk {
 	u8			usecount;
 	u8			lpsc;
 	u8			gpsc;
+	u8			domain;
 	u32			flags;
 	struct clk              *parent;
 	struct list_head	children; 	/* list of children */
@@ -107,11 +108,10 @@ struct clk {
 /* Clock flags: SoC-specific flags start at BIT(16) */
 #define ALWAYS_ENABLED		BIT(1)
 #define CLK_PSC			BIT(2)
-#define PSC_DSP			BIT(3) /* PSC uses DSP domain, not ARM */
-#define CLK_PLL			BIT(4) /* PLL-derived clock */
-#define PRE_PLL			BIT(5) /* source is before PLL mult/div */
-#define PSC_SWRSTDISABLE	BIT(6) /* Disable state is SwRstDisable */
-#define PSC_FORCE		BIT(7) /* Force module state transtition */
+#define CLK_PLL			BIT(3) /* PLL-derived clock */
+#define PRE_PLL			BIT(4) /* source is before PLL mult/div */
+#define PSC_SWRSTDISABLE	BIT(5) /* Disable state is SwRstDisable */
+#define PSC_FORCE		BIT(6) /* Force module state transtition */
 
 #define CLK(dev, con, ck) 	\
 	{			\
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0800f9cf33bb..43a48ee1917b 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -130,7 +130,7 @@ static struct clk dsp_clk = {
 	.name = "dsp",
 	.parent = &pll1_sysclk1,
 	.lpsc = DAVINCI_LPSC_GEM,
-	.flags = PSC_DSP,
+	.domain = DAVINCI_GPSC_DSPDOMAIN,
 	.usecount = 1,			/* REVISIT how to disable? */
 };
 
@@ -145,7 +145,7 @@ static struct clk vicp_clk = {
 	.name = "vicp",
 	.parent = &pll1_sysclk2,
 	.lpsc = DAVINCI_LPSC_IMCOP,
-	.flags = PSC_DSP,
+	.domain = DAVINCI_GPSC_DSPDOMAIN,
 	.usecount = 1,			/* REVISIT how to disable? */
 };
 
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
index 00be4fc26dd7..98b8c83b09ab 100644
--- a/arch/arm/mach-dove/addr-map.c
+++ b/arch/arm/mach-dove/addr-map.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
+#include <plat/addr-map.h>
 #include "common.h"
 
 /*
@@ -34,98 +35,72 @@
 #define ATTR_PCIE_MEM		0xe8
 #define ATTR_SCRATCHPAD		0x0
 
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
-#define WIN_BASE(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
-#define WIN_REMAP_LO(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
-#define WIN_REMAP_HI(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
-
-struct mbus_dram_target_info dove_mbus_dram_info;
-
 static inline void __iomem *ddr_map_sc(int i)
 {
 	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
 }
 
-static int cpu_win_can_remap(int win)
-{
-	if (win < 4)
-		return 1;
-
-	return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
-				 u8 target, u8 attr, int remap)
-{
-	u32 ctrl;
-
-	base &= 0xffff0000;
-	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
-	writel(base, WIN_BASE(win));
-	writel(ctrl, WIN_CTRL(win));
-	if (cpu_win_can_remap(win)) {
-		if (remap < 0)
-			remap = base;
-		writel(remap & 0xffff0000, WIN_REMAP_LO(win));
-		writel(0, WIN_REMAP_HI(win));
-	}
-}
-
-void __init dove_setup_cpu_mbus(void)
-{
-	int i;
-	int cs;
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 8,
+	.remappable_wins = 4,
+	.bridge_virt_base = BRIDGE_VIRT_BASE,
+};
 
+static const struct __initdata orion_addr_map_info addr_map_info[] = {
 	/*
-	 * First, disable and clear windows.
+	 * Windows for PCIe IO+MEM space.
 	 */
-	for (i = 0; i < 8; i++) {
-		writel(0, WIN_BASE(i));
-		writel(0, WIN_CTRL(i));
-		if (cpu_win_can_remap(i)) {
-			writel(0, WIN_REMAP_LO(i));
-			writel(0, WIN_REMAP_HI(i));
-		}
-	}
-
+	{ 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+	  TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
+	},
+	{ 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+	  TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
+	},
+	{ 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+	  TARGET_PCIE0, ATTR_PCIE_MEM, -1
+	},
+	{ 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+	  TARGET_PCIE1, ATTR_PCIE_MEM, -1
+	},
 	/*
-	 * Setup windows for PCIe IO+MEM space.
+	 * Window for CESA engine.
 	 */
-	setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
-		      TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
-	setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
-		      TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
-	setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
-		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
-	setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
-		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
-
+	{ 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+	  TARGET_CESA, ATTR_CESA, -1
+	},
 	/*
-	 * Setup window for CESA engine.
+	 * Window to the BootROM for Standby and Sleep Resume
 	 */
-	setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
-		      TARGET_CESA, ATTR_CESA, -1);
-
+	{ 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+	  TARGET_BOOTROM, ATTR_BOOTROM, -1
+	},
 	/*
-	 * Setup the Window to the BootROM for Standby and Sleep Resume
+	 * Window to the PMU Scratch Pad space
 	 */
-	setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
-		      TARGET_BOOTROM, ATTR_BOOTROM, -1);
+	{ 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+	  TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
+	},
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 }
+};
+
+void __init dove_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
 
 	/*
-	 * Setup the Window to the PMU Scratch Pad space
+	 * Disable, clear and configure windows.
 	 */
-	setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
-		      TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+	orion_config_wins(&addr_map_cfg, addr_map_info);
 
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
 
 	for (i = 0, cs = 0; i < 2; i++) {
 		u32 map = readl(ddr_map_sc(i));
@@ -136,7 +111,7 @@ void __init dove_setup_cpu_mbus(void)
 		if (map & 1) {
 			struct mbus_dram_window *w;
 
-			w = &dove_mbus_dram_info.cs[cs++];
+			w = &orion_mbus_dram_info.cs[cs++];
 			w->cs_index = i;
 			w->mbus_attr = 0; /* CS address decoding done inside */
 					  /* the DDR controller, no need to  */
@@ -145,5 +120,5 @@ void __init dove_setup_cpu_mbus(void)
 			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
 		}
 	}
-	dove_mbus_dram_info.num_cs = cs;
+	orion_mbus_dram_info.num_cs = cs;
 }
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 13bb236cd0cd..dd1429ae6405 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -14,7 +14,6 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/clk.h>
-#include <linux/mbus.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <asm/page.h>
@@ -30,6 +29,7 @@
 #include <linux/irq.h>
 #include <plat/time.h>
 #include <plat/common.h>
+#include <plat/addr-map.h>
 #include "common.h"
 
 static int get_tclk(void);
@@ -71,8 +71,7 @@ void __init dove_map_io(void)
  ****************************************************************************/
 void __init dove_ehci0_init(void)
 {
-	orion_ehci_init(&dove_mbus_dram_info,
-			DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
 }
 
 /*****************************************************************************
@@ -80,8 +79,7 @@ void __init dove_ehci0_init(void)
  ****************************************************************************/
 void __init dove_ehci1_init(void)
 {
-	orion_ehci_1_init(&dove_mbus_dram_info,
-			  DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
+	orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
 }
 
 /*****************************************************************************
@@ -89,7 +87,7 @@ void __init dove_ehci1_init(void)
  ****************************************************************************/
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
-	orion_ge00_init(eth_data, &dove_mbus_dram_info,
+	orion_ge00_init(eth_data,
 			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
 			0, get_tclk());
 }
@@ -107,8 +105,7 @@ void __init dove_rtc_init(void)
  ****************************************************************************/
 void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
 {
-	orion_sata_init(sata_data, &dove_mbus_dram_info,
-			DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
+	orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
 
 }
 
@@ -198,8 +195,7 @@ struct sys_timer dove_timer = {
  ****************************************************************************/
 void __init dove_xor0_init(void)
 {
-	orion_xor0_init(&dove_mbus_dram_info,
-			DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
+	orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
 			IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
 }
 
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 42027305c107..6432a3ba864b 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -15,7 +15,6 @@ struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
 extern struct sys_timer dove_timer;
-extern struct mbus_dram_target_info dove_mbus_dram_info;
 
 /*
  * Basic Dove init functions used early by machine-setup.
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index aa2b3a09a51d..6c11a4df7178 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -10,7 +10,6 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/mbus.h>
 #include <video/vga.h>
 #include <asm/mach/pci.h>
 #include <asm/mach/arch.h>
@@ -19,6 +18,7 @@
 #include <plat/pcie.h>
 #include <mach/irqs.h>
 #include <mach/bridge-regs.h>
+#include <plat/addr-map.h>
 #include "common.h"
 
 struct pcie_port {
@@ -50,7 +50,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 	 */
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
 
-	orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+	orion_pcie_setup(pp->base);
 
 	/*
 	 * IORESOURCE_IO
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 8d03bcef5182..e9a7180863d9 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -13,12 +13,12 @@
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <plat/addr-map.h>
 #include "common.h"
 
 /*
  * Generic Address Decode Windows bit settings
  */
-#define TARGET_DDR		0
 #define TARGET_DEV_BUS		1
 #define TARGET_SRAM		3
 #define TARGET_PCIE		4
@@ -36,118 +36,55 @@
 #define ATTR_SRAM		0x01
 
 /*
- * Helpers to get DDR bank info
+ * Description of the windows needed by the platform code
  */
-#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-#define WIN_CTRL_OFF		0x0000
-#define WIN_BASE_OFF		0x0004
-#define WIN_REMAP_LO_OFF	0x0008
-#define WIN_REMAP_HI_OFF	0x000c
-
-
-struct mbus_dram_target_info kirkwood_mbus_dram_info;
-
-static int __init cpu_win_can_remap(int win)
-{
-	if (win < 4)
-		return 1;
-
-	return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
-				 u8 target, u8 attr, int remap)
-{
-	void __iomem *addr = (void __iomem *)WIN_OFF(win);
-	u32 ctrl;
-
-	base &= 0xffff0000;
-	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
-	writel(base, addr + WIN_BASE_OFF);
-	writel(ctrl, addr + WIN_CTRL_OFF);
-	if (cpu_win_can_remap(win)) {
-		if (remap < 0)
-			remap = base;
-
-		writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
-		writel(0, addr + WIN_REMAP_HI_OFF);
-	}
-}
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
-	void __iomem *addr;
-	int i;
-	int cs;
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 8,
+	.remappable_wins = 4,
+	.bridge_virt_base = BRIDGE_VIRT_BASE,
+};
 
+static const struct __initdata orion_addr_map_info addr_map_info[] = {
 	/*
-	 * First, disable and clear windows.
+	 * Windows for PCIe IO+MEM space.
 	 */
-	for (i = 0; i < 8; i++) {
-		addr = (void __iomem *)WIN_OFF(i);
-
-		writel(0, addr + WIN_BASE_OFF);
-		writel(0, addr + WIN_CTRL_OFF);
-		if (cpu_win_can_remap(i)) {
-			writel(0, addr + WIN_REMAP_LO_OFF);
-			writel(0, addr + WIN_REMAP_HI_OFF);
-		}
-	}
-
+	{ 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+	  TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
+	},
+	{ 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+	  TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
+	},
+	{ 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
+	  TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
+	},
+	{ 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
+	  TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
+	},
 	/*
-	 * Setup windows for PCIe IO+MEM space.
+	 * Window for NAND controller.
 	 */
-	setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
-		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
-	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-		      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
-	setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
-		      TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
-	setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
-		      TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
-
+	{ 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+	  TARGET_DEV_BUS, ATTR_DEV_NAND, -1
+	},
 	/*
-	 * Setup window for NAND controller.