Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers

64 files changed, 98 insertions, 837 deletions

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index ada8f0fc71e4..fb96e607adcf 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on);
 #ifdef CONFIG_MTD_UCLINUX
 extern struct map_info uclinux_ram_map;
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
-unsigned long _ebss;
 EXPORT_SYMBOL(memory_mtd_end);
 EXPORT_SYMBOL(memory_mtd_start);
 EXPORT_SYMBOL(mtd_size);
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 0b0f8b8c4a26..4a469907f04a 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -54,18 +54,6 @@ config ZONE_DMA
 	bool
 	default y
 
-config CPU_HAS_NO_BITFIELDS
-	bool
-
-config CPU_HAS_NO_MULDIV64
-	bool
-
-config CPU_HAS_ADDRESS_SPACES
-	bool
-
-config FPU
-	bool
-
 config HZ
 	int
 	default 1000 if CLEOPATRA
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 43a9f8f1b8eb..82068349a2bb 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -37,6 +37,7 @@ config M68000
 	bool
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_MULDIV64
+	select CPU_HAS_NO_UNALIGNED
 	select GENERIC_CSUM
 	help
 	  The Freescale (was Motorola) 68000 CPU is the first generation of
@@ -48,6 +49,7 @@ config M68000
 config MCPU32
 	bool
 	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_UNALIGNED
 	help
 	  The Freescale (was then Motorola) CPU32 is a CPU core that is
 	  based on the 68020 processor. For the most part it is used in
@@ -376,6 +378,18 @@ config NODES_SHIFT
 	default "3"
 	depends on !SINGLE_MEMORY_CHUNK
 
+config CPU_HAS_NO_BITFIELDS
+	bool
+
+config CPU_HAS_NO_MULDIV64
+	bool
+
+config CPU_HAS_NO_UNALIGNED
+	bool
+
+config CPU_HAS_ADDRESS_SPACES
+	bool
+
 config FPU
 	bool
 
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 0a30406b9442..f5565d6eeb8e 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
 
 	timer_handler(irq, dev_id);
 
-	x=*(volatile unsigned char *)(timer+3);
-	x=*(volatile unsigned char *)(timer+5);
+	x = *(volatile unsigned char *)(apollo_timer + 3);
+	x = *(volatile unsigned char *)(apollo_timer + 5);
 
 	return IRQ_HANDLED;
 }
@@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
 void dn_sched_init(irq_handler_t timer_routine)
 {
 	/* program timer 1 */
-	*(volatile unsigned char *)(timer+3)=0x01;
-	*(volatile unsigned char *)(timer+1)=0x40;
-	*(volatile unsigned char *)(timer+5)=0x09;
-	*(volatile unsigned char *)(timer+7)=0xc4;
+	*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
+	*(volatile unsigned char *)(apollo_timer + 1) = 0x40;
+	*(volatile unsigned char *)(apollo_timer + 5) = 0x09;
+	*(volatile unsigned char *)(apollo_timer + 7) = 0xc4;
 
 	/* enable IRQ of PIC B */
 	*(volatile unsigned char *)(pica+1)&=(~8);
 
 #if 0
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
+	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
+	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
 #endif
 
 	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index eafa2539a8ee..a74e5d95c384 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,4 +1,29 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
 
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += device.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += futex.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local64.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += mutex.h
+generic-y += percpu.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += siginfo.h
+generic-y += statfs.h
+generic-y += topology.h
+generic-y += types.h
 generic-y += word-at-a-time.h
+generic-y += xor.h
diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
deleted file mode 100644
index 6bb8f02685a2..000000000000
--- a/arch/m68k/include/asm/MC68332.h
+++ /dev/null
@@ -1,152 +0,0 @@
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR	0xfffa11
-#define PORTE	BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR	0xfffa15
-#define DDRE	BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR	0xfffa17
-#define PEPAR	BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR	0xfffa19
-#define PORTF	BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR	0xfffa1d
-#define DDRF	BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR	0xfffa1f
-#define PFPAR	BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR	0xfffc15
-#define PORTQS	BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR	0xfffc17
-#define DDRQS	BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR	0xfffc16
-#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC	0x0000
-#define CSOR_MODE_SYNC	0x8000
-#define CSOR_MODE_MASK	0x8000
-#define CSOR_BYTE_DISABLE	0x0000
-#define CSOR_BYTE_UPPER		0x4000
-#define CSOR_BYTE_LOWER		0x2000
-#define CSOR_BYTE_BOTH		0x6000
-#define CSOR_BYTE_MASK		0x6000
-#define CSOR_RW_RSVD		0x0000
-#define CSOR_RW_READ		0x0800
-#define CSOR_RW_WRITE		0x1000
-#define CSOR_RW_BOTH		0x1800
-#define CSOR_RW_MASK		0x1800
-#define CSOR_STROBE_DS		0x0400
-#define CSOR_STROBE_AS		0x0000
-#define CSOR_STROBE_MASK	0x0400
-#define CSOR_DSACK_WAIT(x)	(wait << 6)
-#define CSOR_DSACK_FTERM	(14 << 6)
-#define CSOR_DSACK_EXTERNAL	(15 << 6)
-#define CSOR_DSACK_MASK		0x03c0
-#define CSOR_SPACE_CPU		0x0000
-#define CSOR_SPACE_USER		0x0010
-#define CSOR_SPACE_SU		0x0020
-#define CSOR_SPACE_BOTH		0x0030
-#define CSOR_SPACE_MASK		0x0030
-#define CSOR_IPL_ALL		0x0000
-#define CSOR_IPL_PRIORITY(x)	(x << 1)
-#define CSOR_IPL_MASK		0x000e
-#define CSOR_AVEC_ON		0x0001
-#define CSOR_AVEC_OFF		0x0000
-#define CSOR_AVEC_MASK		0x0001
-
-#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
-#define CSBAR_ADDR_MASK		0xfff8
-#define CSBAR_BLKSIZE_2K	0x0000
-#define CSBAR_BLKSIZE_8K	0x0001
-#define CSBAR_BLKSIZE_16K	0x0002
-#define CSBAR_BLKSIZE_64K	0x0003
-#define CSBAR_BLKSIZE_128K	0x0004
-#define CSBAR_BLKSIZE_256K	0x0005
-#define CSBAR_BLKSIZE_512K	0x0006
-#define CSBAR_BLKSIZE_1M	0x0007
-#define CSBAR_BLKSIZE_MASK	0x0007
-
-#define CSPAR_DISC	0
-#define CSPAR_ALT	1
-#define CSPAR_CS8	2
-#define CSPAR_CS16	3
-#define CSPAR_MASK	3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x)	(x << 2)
-#define CSPAR0_CS1(x)	(x << 4)
-#define CSPAR0_CS2(x)	(x << 6)
-#define CSPAR0_CS3(x)	(x << 8)
-#define CSPAR0_CS4(x)	(x << 10)
-#define CSPAR0_CS5(x)	(x << 12)
-
-#define CSPAR1_CS6(x)	(x << 0)
-#define CSPAR1_CS7(x)	(x << 2)
-#define CSPAR1_CS8(x)	(x << 4)
-#define CSPAR1_CS9(x)	(x << 6)
-#define CSPAR1_CS10(x)	(x << 8)
-
-#endif
diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h
deleted file mode 100644
index 954adc851adb..000000000000
--- a/arch/m68k/include/asm/apollodma.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_APOLLO_DMA_H
-#define _ASM_APOLLO_DMA_H
-
-#include <asm/apollohw.h>		/* need byte IO */
-#include <linux/spinlock.h>		/* And spinlocks */
-#include <linux/delay.h>
-
-
-#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
-#define dma_inb(addr)	   (*((volatile unsigned char *)(addr+IO_BASE)))
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x10C00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0x10D00	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		(IO_DMA1_BASE+0x08) /* command register (w) */
-#define DMA1_STAT_REG		(IO_DMA1_BASE+0x08) /* status register (r) */
-#define DMA1_REQ_REG            (IO_DMA1_BASE+0x09) /* request register (w) */
-#define DMA1_MASK_REG		(IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
-#define DMA1_MODE_REG		(IO_DMA1_BASE+0x0B) /* mode register (w) */
-#define DMA1_CLEAR_FF_REG	(IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
-#define DMA1_RESET_REG		(IO_DMA1_BASE+0x0D) /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       (IO_DMA1_BASE+0x0E) /* Clear Mask */
-#define DMA1_MASK_ALL_REG       (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		(IO_DMA2_BASE+0x10) /* command register (w) */
-#define DMA2_STAT_REG		(IO_DMA2_BASE+0x10) /* status register (r) */
-#define DMA2_REQ_REG            (IO_DMA2_BASE+0x12) /* request register (w) */
-#define DMA2_MASK_REG		(IO_DMA2_BASE+0x14) /* single-channel mask (w) */
-#define DMA2_MODE_REG		(IO_DMA2_BASE+0x16) /* mode register (w) */
-#define DMA2_CLEAR_FF_REG	(IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
-#define DMA2_RESET_REG		(IO_DMA2_BASE+0x1A) /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       (IO_DMA2_BASE+0x1C) /* Clear Mask */
-#define DMA2_MASK_ALL_REG       (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
-
-#define DMA_ADDR_0              (IO_DMA1_BASE+0x00) /* DMA address registers */
-#define DMA_ADDR_1              (IO_DMA1_BASE+0x02)
-#define DMA_ADDR_2              (IO_DMA1_BASE+0x04)
-#define DMA_ADDR_3              (IO_DMA1_BASE+0x06)
-#define DMA_ADDR_4              (IO_DMA2_BASE+0x00)
-#define DMA_ADDR_5              (IO_DMA2_BASE+0x04)
-#define DMA_ADDR_6              (IO_DMA2_BASE+0x08)
-#define DMA_ADDR_7              (IO_DMA2_BASE+0x0C)
-
-#define DMA_CNT_0               (IO_DMA1_BASE+0x01)   /* DMA count registers */
-#define DMA_CNT_1               (IO_DMA1_BASE+0x03)
-#define DMA_CNT_2               (IO_DMA1_BASE+0x05)
-#define DMA_CNT_3               (IO_DMA1_BASE+0x07)
-#define DMA_CNT_4               (IO_DMA2_BASE+0x02)
-#define DMA_CNT_5               (IO_DMA2_BASE+0x06)
-#define DMA_CNT_6               (IO_DMA2_BASE+0x0A)
-#define DMA_CNT_7               (IO_DMA2_BASE+0x0E)
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-#define DMA_8BIT 0
-#define DMA_16BIT 1
-#define DMA_BUSMASTER 2
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: