Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...

97 files changed, 1802 insertions, 2666 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f9f4c4d9c704..000cf7628e6e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
+	dove-d2plug.dtb \
 	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
@@ -85,6 +86,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
 	kirkwood-netgear_readynas_duo_v2.dtb \
 	kirkwood-ns2.dtb \
 	kirkwood-ns2lite.dtb \
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 5cae2ab69762..022646ef4b38 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -42,6 +42,8 @@
 			regulator-always-on;
 			regulator-boot-on;
 			gpio = <&gpio0 1 0>;
+			pinctrl-0 = <&pmx_gpio_1>;
+			pinctrl-names = "default";
 		};
 	};
 
@@ -53,10 +55,24 @@
 			clock-frequency = <25000000>;
 		};
 	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		pinctrl-0 = <&pmx_gpio_19>;
+		pinctrl-names = "default";
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+	compatible = "marvell,88e1310";
+	reg = <1>;
+};
 
 &i2c0 {
 	status = "okay";
@@ -103,6 +119,7 @@
 	status = "okay";
 	/* sdio0 card detect is connected to wrong pin on CuBox */
 	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
 };
 
 &spi0 {
@@ -115,23 +132,3 @@
 		reg = <0>;
 	};
 };
-
-&pinctrl {
-	pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
-	pinctrl-names = "default";
-
-	pmx_gpio_1: pmx-gpio-1 {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_12: pmx-gpio-12 {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_18: pmx-gpio-18 {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
new file mode 100644
index 000000000000..e2222ce94f2f
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Globalscale D2Plug";
+	compatible = "globalscale,d2plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 1 1>;
+		};
+
+		bluetooth-act {
+			label = "bt-act";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25L3205D */
+	spi-flash@0 {
+		compatible = "st,m25l3205d";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 6cab46849cdb..cc279166646f 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -10,6 +10,23 @@
 		gpio2 = &gpio2;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "marvell,pj4a", "marvell,sheeva-v7";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+	};
+
+	l2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0>;
+	};
+
 	soc@f1000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -25,16 +42,28 @@
 		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
 		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
 
-		l2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0>;
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
 		};
 
-		intc: interrupt-controller {
+		intc: main-interrupt-ctrl@20200 {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			reg = <0x20204 0x04>, <0x20214 0x04>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <0>;
+			marvell,#interrupts = <5>;
 		};
 
 		core_clk: core-clocks@d0214 {
@@ -43,14 +72,14 @@
 			#clock-cells = <1>;
 		};
 
-		gate_clk: clock-gating-control@d0038 {
+		gate_clk: clock-gating-ctrl@d0038 {
 			compatible = "marvell,dove-gating-clock";
 			reg = <0xd0038 0x4>;
 			clocks = <&core_clk 0>;
 			#clock-cells = <1>;
 		};
 
-		thermal: thermal@d001c {
+		thermal: thermal-diode@d001c {
 			compatible = "marvell,dove-thermal";
 			reg = <0xd001c 0x0c>, <0xd005c 0x08>;
 		};
@@ -70,6 +99,8 @@
 			reg-shift = <2>;
 			interrupts = <8>;
 			clocks = <&core_clk 0>;
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
@@ -91,7 +122,7 @@
 			status = "disabled";
 		};
 
-		gpio0: gpio@d0400 {
+		gpio0: gpio-ctrl@d0400 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
 			gpio-controller;
@@ -102,7 +133,7 @@
 			interrupts = <12>, <13>, <14>, <60>;
 		};
 
-		gpio1: gpio@d0420 {
+		gpio1: gpio-ctrl@d0420 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
 			gpio-controller;
@@ -113,7 +144,7 @@
 			interrupts = <61>;
 		};
 
-		gpio2: gpio@e8400 {
+		gpio2: gpio-ctrl@e8400 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
 			gpio-controller;
@@ -121,13 +152,188 @@
 			ngpios = <8>;
 		};
 
-		pinctrl: pinctrl@d0200 {
+		pinctrl: pin-ctrl@d0200 {
 			compatible = "marvell,dove-pinctrl";
 			reg = <0xd0200 0x10>;
 			clocks = <&gate_clk 22>;
+
+			pmx_gpio_0: pmx-gpio-0 {
+				marvell,pins = "mpp0";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_1: pmx-gpio-1 {
+				marvell,pins = "mpp1";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_2: pmx-gpio-2 {
+				marvell,pins = "mpp2";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_3: pmx-gpio-3 {
+				marvell,pins = "mpp3";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_4: pmx-gpio-4 {
+				marvell,pins = "mpp4";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_5: pmx-gpio-5 {
+				marvell,pins = "mpp5";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_6: pmx-gpio-6 {
+				marvell,pins = "mpp6";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_7: pmx-gpio-7 {
+				marvell,pins = "mpp7";
+