Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: SoC fixes: from Olof Johansson:
 "A bunch of fixes for regressions (and a few other problems) in
  3.4-rc1:

 - Fix for regression of mach/io.h cleanup on platforms with PCI or
   PCMCIA (adding back the include file on those for now)
 - AT91 fixes for usb and spi
 - smsc911x ethernet fixes for i.MX
 - smsc911x fixes for OMAP
 - gpio fixes for Tegra
 - A handful of build error and warning fixes for various platforms
 - cpufreq kconfig dependencies, build and lowlevel debug fixes for
   Samsung platforms

  In other words, more or less the regular collection of -rc1/2 type
  material.  A few of them, in particular the smsc911x for OMAP series,
  aren't technically regressions for 3.4, but they're valid fixes and
  we're still relatively early in the rc cycle so it seems appropriate
  to include them."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: fix __io macro for PCMCIA
  ARM: EXYNOS: Fix compiler warning in dma.c file
  ARM: EXYNOS: fix ISO C90 warning
  ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions
  ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status
  ARM: OMAP2+: hwmod: Restore sysc after a reset
  ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules
  ARM: OMAP3: clock data: fill in some missing clockdomains
  ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock
  ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL
  ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()
  gpio: tegra: Iterate over the correct number of banks
  gpio: tegra: fix register address calculations for Tegra30
  EXYNOS: fix dependency for EXYNOS_CPUFREQ
  ARM: at91: dt: remove unit-address part for memory nodes
  ARM: at91: fix check of valid GPIO for SPI and USB
  USB: ehci-atmel: add needed of.h header file
  ARM: at91/NAND DT bindings: add comments
  ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file
  USB: ohci-at91: trivial return code name change
  ...

65 files changed, 463 insertions, 230 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 93180845ae16..cf006d40342c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -338,6 +338,7 @@ config ARCH_AT91
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 processors.
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 92f36627e7f8..799ad1889b51 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -35,7 +35,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x08000000>;
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index ac0dc0031dda..7829a4d0cb22 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -37,8 +37,8 @@
 		usb0: ohci@00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 0
-					   &pioD 20 0
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
 					  >;
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3d0c32fb218f..9e6eb6ecea0e 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -36,7 +36,7 @@
 		};
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x10000000>;
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index c4c8ae4123d5..a3633bd13111 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -17,7 +17,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x4000000>;
 	};
 
@@ -73,8 +73,8 @@
 		usb0: ohci@00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 0
-					   &pioD 3 0>;
+			atmel,vbus-gpio = <&pioD 1 1
+					   &pioD 3 1>;
 		};
 
 		usb1: ehci@00800000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index c111001f254e..70ab3a4e026f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -34,7 +34,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -201,8 +201,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
+			gpios = <&pioD 5 0
+				 &pioD 4 0
 				 0
 				>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 67936f83c694..31e7be23703d 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -8,7 +8,7 @@
  */
 
 / {
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x8000000>;
 	};
 
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 3b3c4e0fa79f..7c2399c532e5 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -16,7 +16,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x4000000>;
 	};
 
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 44f4a09ff37b..05112380dc53 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -2,6 +2,7 @@
 #define __ASM_BARRIER_H
 
 #ifndef __ASSEMBLY__
+#include <asm/outercache.h>
 
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
@@ -39,7 +40,6 @@
 #ifdef CONFIG_ARCH_HAS_BARRIERS
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#include <asm/outercache.h>
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
 #define wmb()		mb()
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index df0ac0bb39aa..9af5563dd3eb 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -119,7 +119,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
 #else
-#define __io(a)		({ (void)(a); __typesafe_io(0); })
+#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
 #endif
 
 /*
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7e5651ee9f85..5652dde4bbe2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -598,6 +598,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 096da87dc00d..4db961a93085 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 53688c46f956..fe99206de880 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
@@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 698479f1e197..6b008aee1dff 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -127,12 +127,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	usbh_ehci_data = *data;
@@ -785,6 +787,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index eda72e83037d..fe4ae22e8561 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		/* enable chip-select pin */
 		at91_set_gpio_output(cs_pin, 1);
 
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index b6831eeb7b76..13c8cae60462 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
 	CLKDEV_CON_ID("pioA", &pioAB_clk),
 	CLKDEV_CON_ID("pioB", &pioAB_clk),
 	CLKDEV_CON_ID("pioC", &pioCD_clk),
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 66f0ddf4b2ae..2ffe50f3a9e9 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
 	.ports		= 2,
 	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e1bea73e6b30..c88e908ddd82 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -71,6 +71,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
 	.ports		= 2,
 	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 544a5d5ce416..49a821192c65 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
 extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
+#define AT91_MAX_USBH_PORTS	3
 struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_active_low[2];
+	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
+	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8		ports;				/* number of ports on root hub */
 	u8              overcurrent_supported;
-	int             overcurrent_pin[2];
-	u8              overcurrent_status[2];
-	u8              overcurrent_changed[2];
+	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 000000000000..2d9ca0455745
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+#define __io(a)			__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index e6cc50e94a58..8614aab47cc0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -583,10 +583,11 @@ core_initcall(exynos_core_init);
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
+	int ret;
+
 	if (soc_is_exynos5250())
 		return 0;
 
-	int ret;
 	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
 	if (!ret) {
 		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 3983abee4264..69aaa4503205 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -35,8 +35,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 exynos4210_pdma0_peri[] = {
 	DMACH_PCM0_RX,
 	DMACH_PCM0_TX,
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6c857ff0b5d8..e0c86ea475e7 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,10 +21,9 @@
 	 */
 
 	.macro addruart, rp, rv, tmp
-		mov	\rp, #0x10000000
-		ldr	\rp, [\rp, #0x0]
-		and	\rp, \rp, #0xf00000
-		teq	\rp, #0x500000		@@ EXYNOS5
+		mrc	p15, 0, \tmp, c0, c0, 0
+		and	\tmp, \tmp, #0xf0
+		teq	\tmp, #0xf0		@@ A15
 		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 493f4f365ddf..2979995d5a6a 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -20,9 +20,24 @@ volatile u8 *uart_base;
 
 #include <plat/uncompress.h>
 
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
 static void arch_detect_cpu(void)
 {
-	if (machine_is_smdk5250())
+	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
+
+	/*
+	 * product_id is bits 31:12
+	 *    bits 23:20 describe the exynosX family
+	 *
+	 */
+	chip_id >>= 20;
+	chip_id &= 0xf;
+
+	if (chip_id == 0x5)
 		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 	else
 		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index b9a95ed75553..98e04f5a87dd 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -662,6 +662,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk)
 	_REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
 	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 1e279af656ad..e56c1a83eee3 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c