diff options
author | Arnd Bergmann <arnd@arndb.de> | 2015-12-03 18:16:45 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2015-12-15 23:43:36 +0100 |
commit | 1dc93416eaec59886fde97dd095fb9140fa58130 (patch) | |
tree | 88a526eb24e5a4f773a5bffee51c0f2b02b932a0 /arch | |
parent | 0045c0dd2f643b74f7089253d6ffa1bbb72d3d87 (diff) |
ARM: debug-ll: reorder Kconfig alphanumerically
The file has gotten a little out of sync, as platforms got
added in the wrong place, or have been renamed. This moves
the options around, but should not change any functionality.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/Kconfig.debug | 282 |
1 files changed, 141 insertions, 141 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index fea1e685fb5a..bb868887c83d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -232,23 +232,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_ZYNQ_UART0 - bool "Kernel low-level debugging on Xilinx Zynq using UART0" - depends on ARCH_ZYNQ - help - Say Y here if you want the debug print routines to direct - their output to UART0 on the Zynq platform. - - config DEBUG_ZYNQ_UART1 - bool "Kernel low-level debugging on Xilinx Zynq using UART1" - depends on ARCH_ZYNQ - help - Say Y here if you want the debug print routines to direct - their output to UART1 on the Zynq platform. - - If you have a ZC702 board and want early boot messages to - appear on the USB serial adaptor, select this option. - config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -263,6 +246,20 @@ choice Say Y here if you want the debug print routines to direct their output to the UA0 serial port in the CX92755. + config DEBUG_LL_UART_EFM32 + bool "Kernel low-level debugging via efm32 UART" + depends on ARCH_EFM32 + help + Say Y here if you want the debug print routines to direct + their output to an UART or USART port on efm32 based + machines. Use the following addresses for DEBUG_UART_PHYS: + + 0x4000c000 | USART0 + 0x4000c400 | USART1 + 0x4000c800 | USART2 + 0x4000e000 | UART0 + 0x4000e400 | UART1 + config DEBUG_EP93XX bool "Kernel low-level debugging messages via ep93xx UART" depends on ARCH_EP93XX @@ -512,23 +509,6 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_QCOM_UARTDM - bool "Kernel low-level debugging messages via QCOM UARTDM" - depends on ARCH_QCOM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on Qualcomm devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT - APQ8064 0x16640000 0xf0040000 - APQ8084 0xf995e000 0xfa75e000 - MSM8X60 0x19c40000 0xf0040000 - MSM8960 0x16440000 0xf0040000 - MSM8974 0xf991e000 0xfa71e000 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_MVEBU_UART0 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" depends on ARCH_MVEBU @@ -588,12 +568,29 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. - config DEBUG_VF_UART - bool "Vybrid UART" - depends on SOC_VF610 + config DEBUG_MT6589_UART0 + bool "Mediatek mt6589 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on Vybrid based platforms. + for Mediatek mt6589 based platforms on UART0. + + config DEBUG_MT8127_UART0 + bool "Mediatek mt8127/mt6592 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8127 based platforms on UART0. + + config DEBUG_MT8135_UART3 + bool "Mediatek mt8135 UART3" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8135 based platforms on UART3. config DEBUG_NETX_UART bool "Kernel low-level debugging messages via NetX UART" @@ -757,6 +754,23 @@ choice Say Y here if you want kernel low-level debugging support on PXA UART1. + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM + help + Say Y here if you want the debug print routines to direct + their output to the serial port on Qualcomm devices. + + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -1023,58 +1037,6 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. - config TEGRA_DEBUG_UART_AUTO_ODMDATA - bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" - depends on ARCH_TEGRA - select DEBUG_TEGRA_UART - help - Automatically determines which UART to use for low-level - debug based on the ODMDATA value. This value is part of - the BCT, and is written to the boot memory device using - nvflash, or other flashing tool. When bits 19:18 are 3, - then bits 17:15 indicate which UART to use; 0/1/2/3/4 - are UART A/B/C/D/E. - - config TEGRA_DEBUG_UARTA - bool "Kernel low-level debugging messages via Tegra UART A" - depends on ARCH_TEGRA - select DEBUG_TEGRA_UART - help - Say Y here if you want kernel low-level debugging support - on Tegra based platforms. - - config TEGRA_DEBUG_UARTB - bool "Kernel low-level debugging messages via Tegra UART B" - depends on ARCH_TEGRA - select DEBUG_TEGRA_UART - help - Say Y here if you want kernel low-level debugging support - on Tegra based platforms. - - config TEGRA_DEBUG_UARTC - bool "Kernel low-level debugging messages via Tegra UART C" - depends on ARCH_TEGRA - select DEBUG_TEGRA_UART - help - Say Y here if you want kernel low-level debugging support - on Tegra based platforms. - - config TEGRA_DEBUG_UARTD - bool "Kernel low-level debugging messages via Tegra UART D" - depends on ARCH_TEGRA - select DEBUG_TEGRA_UART - help - Say Y here if you want kernel low-level debugging support - on Tegra based platforms. - - config TEGRA_DEBUG_UARTE - bool "Kernel low-level debugging messages via Tegra UART E" - depends on ARCH_TEGRA - select DEBUG_TEGRA_UART - help - Say Y here if you want kernel low-level debugging support - on Tegra based platforms. - config DEBUG_SIRFPRIMA2_UART1 bool "Kernel low-level debugging messages via SiRFprimaII UART1" depends on ARCH_PRIMA2 @@ -1139,6 +1101,58 @@ choice If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Automatically determines which UART to use for low-level + debug based on the ODMDATA value. This value is part of + the BCT, and is written to the boot memory device using + nvflash, or other flashing tool. When bits 19:18 are 3, + then bits 17:15 indicate which UART to use; 0/1/2/3/4 + are UART A/B/C/D/E. + + config TEGRA_DEBUG_UARTA + bool "Kernel low-level debugging messages via Tegra UART A" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTB + bool "Kernel low-level debugging messages via Tegra UART B" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTC + bool "Kernel low-level debugging messages via Tegra UART C" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTD + bool "Kernel low-level debugging messages via Tegra UART D" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTE + bool "Kernel low-level debugging messages via Tegra UART E" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + config DEBUG_U300_UART bool "Kernel low-level debugging messages via U300 UART0" depends on ARCH_U300 @@ -1154,14 +1168,6 @@ choice Say Y here if you want kernel low-level debugging support on Ux500 based platforms. - config DEBUG_MT6589_UART0 - bool "Mediatek mt6589 UART0" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt6589 based platforms on UART0. - config DEBUG_VERSATILE bool "Kernel low-level debugging messages via ARM Versatile UART" depends on ARCH_VERSATILE @@ -1170,22 +1176,6 @@ choice Say Y here if you want kernel low-level debugging support on ARM Versatile platforms. - config DEBUG_MT8127_UART0 - bool "Mediatek mt8127/mt6592 UART0" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt8127 based platforms on UART0. - - config DEBUG_MT8135_UART3 - bool "Mediatek mt8135 UART3" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt8135 based platforms on UART3. - config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -1222,6 +1212,13 @@ choice This option selects UART0 at 0xb0090000. This is appropriate for Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 + config DEBUG_VF_UART + bool "Vybrid UART" + depends on SOC_VF610 + help + Say Y here if you want kernel low-level debugging support + on Vybrid based platforms. + config DEBUG_VT8500_UART0 bool "Use UART0 on VIA/Wondermedia SoCs" depends on ARCH_VT8500 @@ -1229,6 +1226,35 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_ZTE_ZX + bool "Use ZTE ZX UART" + select DEBUG_UART_PL01X + depends on ARCH_ZX + help + Say Y here if you are enabling ZTE ZX296702 SOC and need + debug uart support. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + + config DEBUG_ZYNQ_UART0 + bool "Kernel low-level debugging on Xilinx Zynq using UART0" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART0 on the Zynq platform. + + config DEBUG_ZYNQ_UART1 + bool "Kernel low-level debugging on Xilinx Zynq using UART1" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART1 on the Zynq platform. + + If you have a ZC702 board and want early boot messages to + appear on the USB serial adaptor, select this option. + config DEBUG_ICEDCC bool "Kernel low-level debugging via EmbeddedICE DCC channel" help @@ -1256,18 +1282,6 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help @@ -1281,20 +1295,6 @@ choice options; the platform specific options are deprecated and will be soon removed. - config DEBUG_LL_UART_EFM32 - bool "Kernel low-level debugging via efm32 UART" - depends on ARCH_EFM32 - help - Say Y here if you want the debug print routines to direct - their output to an UART or USART port on efm32 based - machines. Use the following addresses for DEBUG_UART_PHYS: - - 0x4000c000 | USART0 - 0x4000c400 | USART1 - 0x4000c800 | USART2 - 0x4000e000 | UART0 - 0x4000e400 | UART1 - config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help @@ -1559,6 +1559,7 @@ config DEBUG_UART_VIRT default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf1f02800 if DEBUG_SUNXI_R_UART + default 0xf31004c0 if DEBUG_MESON_UARTAO default 0xf4090000 if DEBUG_LPC32XX default 0xf4200000 if DEBUG_GEMINI default 0xf6200000 if DEBUG_PXA_UART1 @@ -1585,7 +1586,6 @@ config DEBUG_UART_VIRT default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X - default 0xf31004c0 if DEBUG_MESON_UARTAO default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART |