Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "This time, this pull request contains changes crossing subsystems and
  archs/platforms, which is mainly because of a bigger modernization of
  moving from legacy GPIO to GPIO descriptors for MMC (by Linus
  Walleij).

  Additionally, once again, I am funneling changes to
  drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
  mostly due to that we lack a maintainer for these.

  Summary:

  MMC core:
   - Cleanup BKOPS support
   - Introduce MMC_CAP_SYNC_RUNTIME_PM
   - slot-gpio: Delete legacy slot GPIO handling

  MMC host:
   - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
   - bcm2835: Several improvements to better recover from errors
   - jz4740: Rework and fixup pre|post_req support
   - mediatek: Add support for SDIO IRQs
   - meson-gx: Improve clock phase management
   - meson-gx: Stop descriptor on errors
   - mmci: Complete the sbc error path by sending a stop command
   - renesas_sdhi/tmio: Fixup reset/resume operations
   - renesas_sdhi: Add support for r8a774c0 and R7S9210
   - renesas_sdhi: Whitelist R8A77990 SDHI
   - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
   - rtsx_usb_sdmmc: Re-work card detection/removal support
   - rtsx_usb_sdmmc: Re-work runtime PM support
   - sdhci: Fix timeout loops for some variant drivers
   - sdhci: Improve support for error handling due to failing commands
   - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
   - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
   - sdhci-of-esdhc: Add support for eMMC HS400 mode
   - sdhci-omap: Fixup reset support
   - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
   - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
   - sdhci-msm: Fixup dynamical clock gating issues
   - various: Complete converting all hosts into using slot GPIO descriptors

  Other:
   - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
   - Add new Alcor Micro cardreader PCI driver
   - Support runtime power management for memstick rtsx_usb_ms driver
   - Use USB remote wakeups for card detection for rtsx_usb misc driver"

* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
  mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
  mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
  dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
  mmc: core: Cleanup BKOPS support
  mmc: core: Drop redundant check in mmc_send_hpi_cmd()
  mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
  dt-bindings: sdhci-omap: Add note for cpu_thermal
  mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
  mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
  mmc: sdhci: Add quirk to disable LED control
  mmc: mmci: add variant property to set command stop bit
  misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
  mmc: meson-gx: add signal resampling
  mmc: meson-gx: align default phase on soc vendor tree
  mmc: meson-gx: remove useless lock
  mmc: meson-gx: make sure the descriptor is stopped on errors
  mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
  dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
  dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
  mmc: sdhci-msm: avoid unused function warning
  ...

48 files changed, 575 insertions, 192 deletions

diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 41aa57581356..80ccb984d521 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,6 +25,7 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <linux/platform_data/spi-ep93xx.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 
 #include <mach/hardware.h>
 #include <mach/gpio-ep93xx.h>
@@ -45,9 +46,15 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
 static struct mmc_spi_platform_data simone_mmc_spi_data = {
 	.detect_delay	= 500,
 	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.flags		= MMC_SPI_USE_CD_GPIO,
-	.cd_gpio	= EP93XX_GPIO_LINE_EGPIO0,
-	.cd_debounce	= 1,
+};
+
+static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
+	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct spi_board_info simone_spi_devices[] __initdata = {
@@ -105,6 +112,7 @@ static void __init simone_init_machine(void)
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(simone_i2c_board_info,
 			    ARRAY_SIZE(simone_i2c_board_info));
+	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
 	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
 			    ARRAY_SIZE(simone_spi_devices));
 	simone_register_audio();
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 5a0b6187990a..767ee64628dc 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/fb.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
@@ -202,13 +203,20 @@ static struct mmc_spi_platform_data vision_spi_mmc_data = {
 	.detect_delay	= 100,
 	.powerup_msecs	= 100,
 	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.flags		= MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
-	.cd_gpio	= EP93XX_GPIO_LINE_EGPIO15,
-	.cd_debounce	= 1,
-	.ro_gpio	= EP93XX_GPIO_LINE_F(0),
 	.caps2		= MMC_CAP2_RO_ACTIVE_HIGH,
 };
 
+static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
+	.dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW),
+		/* Write protect */
+		GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /*************************************************************************
  * SPI Bus
  *************************************************************************/
@@ -286,6 +294,7 @@ static void __init vision_init_machine(void)
 
 	ep93xx_register_i2c(vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
+	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
 				ARRAY_SIZE(vision_spi_board_info));
 	vision_register_i2s();
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index e595e5368676..46ba3348e8f0 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -214,8 +215,6 @@ static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
 #define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
 #define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
 #define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
-#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -341,12 +340,21 @@ static int __init pcm043_otg_mode(char *options)
 __setup("otg_mode=", pcm043_otg_mode);
 
 static struct esdhc_platform_data sd1_pdata = {
-	.wp_gpio = SD1_GPIO_WP,
-	.cd_gpio = SD1_GPIO_CD,
 	.wp_type = ESDHC_WP_GPIO,
 	.cd_type = ESDHC_CD_GPIO,
 };
 
+static struct gpiod_lookup_table sd1_gpio_table = {
+	.dev_id = "sdhci-esdhc-imx35.0",
+	.table = {
+		/* Card detect: bank 2 offset 24 */
+		GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect: bank 2 offset 23 */
+		GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * Board specific initialization.
  */
@@ -391,6 +399,7 @@ static void __init pcm043_late_init(void)
 {
 	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 
+	gpiod_add_lookup_table(&sd1_gpio_table);
 	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index c52c081eb6d9..4bcbd3d55b36 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -290,9 +290,6 @@ static unsigned long balloon3_mmc_pin_config[] __initdata = {
 
 static struct pxamci_platform_data balloon3_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
 	.detect_delay_ms	= 200,
 };
 
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index be4a66166d61..f7081a50dc67 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/delay.h>
 
 #include <linux/platform_data/rtc-v3020.h>
@@ -288,14 +289,23 @@ static inline void cmx270_init_ohci(void) {}
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO83_MMC_IRQ,
-	.gpio_card_ro		= -1,
-	.gpio_power		= GPIO105_MMC_POWER,
-	.gpio_power_invert	= 1,
+};
+
+static struct gpiod_lookup_table cmx270_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Card detect on GPIO 83 */
+		GPIO_LOOKUP("gpio-pxa", GPIO83_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
+		/* Power on GPIO 105 */
+		GPIO_LOOKUP("gpio-pxa", GPIO105_MMC_POWER,
+			    "power", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static void __init cmx270_init_mmc(void)
 {
+	gpiod_add_lookup_table(&cmx270_mci_gpio_table);
 	pxa_set_mci_info(&cmx270_mci_platform_data);
 }
 #else
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index c5c0ab8ac9f9..109fab292f94 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -459,9 +459,17 @@ static inline void cm_x300_init_nand(void) {}
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
 	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO82_MMC_IRQ,
-	.gpio_card_ro		= GPIO85_MMC_WP,
-	.gpio_power		= -1,
+};
+
+static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Card detect on GPIO 82 */
+		GPIO_LOOKUP("gpio-pxa", GPIO82_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect on GPIO 85 */
+		GPIO_LOOKUP("gpio-pxa", GPIO85_MMC_WP, "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 /* The second MMC slot of CM-X300 is hardwired to Libertas card and has
@@ -482,13 +490,11 @@ static struct pxamci_platform_data cm_x300_mci2_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 			= cm_x300_mci2_init,
 	.exit			= cm_x300_mci2_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
 };
 
 static void __init cm_x300_init_mmc(void)
 {
+	gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
 	pxa_set_mci_info(&cm_x300_mci_platform_data);
 	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
 }
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 10e2278b7a28..2ccdef5de138 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
@@ -37,22 +37,44 @@
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data colibri_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_ro		= -1,
 	.detect_delay_ms	= 200,
 };
 
+static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init colibri_mmc_init(void)
 {
 	if (machine_is_colibri())	/* PXA270 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO0_COLIBRI_PXA270_SD_DETECT;
+		gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table);
 	if (machine_is_colibri300())	/* PXA300 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO13_COLIBRI_PXA300_SD_DETECT;
+		gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table);
 	else				/* PXA320 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO28_COLIBRI_PXA320_SD_DETECT;
+		gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table);
 
 	pxa_set_mci_info(&colibri_mci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 3ccf2a95569b..d203dd30cdd0 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -14,7 +14,7 @@
 
 #include <linux/bitops.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/leds.h>
@@ -51,14 +51,25 @@
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data income_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
-	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
 	.detect_delay_ms	= 200,
 };
 
+static struct gpiod_lookup_table income_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Card detect on GPIO 0 */
+		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		/* Write protect on GPIO 1 */
+		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_RO,
+			    "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init income_mmc_init(void)
 {
+	gpiod_add_lookup_table(&income_mci_gpio_table);
 	pxa_set_mci_info(&income_mci_platform_data);
 }
 #else
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 9a5a35e90769..c9732cace5e3 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/pm.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/backlight.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
@@ -493,11 +494,23 @@ static struct platform_device corgi_audio_device = {
 static struct pxamci_platform_data corgi_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
-	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
-	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
 
+static struct gpiod_lookup_table corgi_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Card detect on GPIO 9 */
+		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		/* Write protect on GPIO 7 */
+		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP,
+			    "wp", GPIO_ACTIVE_LOW),
+		/* Power on GPIO 33 */
+		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR,
+			    "power", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
 
 /*
  * Irda
@@ -731,6 +744,7 @@ static void __init corgi_init(void)
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
+	gpiod_add_lookup_table(&corgi_mci_gpio_table);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 271aedae7542..e26e7e60a169 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -129,9 +129,19 @@ static struct pxamci_platform_data csb726_mci = {
 	.detect_delay_ms	= 500,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	/* FIXME setpower */
-	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
-	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
-	.gpio_power		= -1,
+};
+
+static struct gpiod_lookup_table csb726_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Card detect on GPIO 100 */
+		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		/* Write protect on GPIO 101 */
+		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
+			    "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct pxaohci_platform_data csb726_ohci_platform_data = {
@@ -264,6 +274,7 @@ static void __init csb726_init(void)
 	pxa_set_stuart_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa27x_set_i2c_power_info(NULL);
+	gpiod_add_lookup_table(&csb726_mci_gpio_table);
 	pxa_set_mci_info(&csb726_mci);
 	pxa_set_ohci_info(&csb726_ohci_platform_data);
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 67e37df637f5..32c1edeb3f14 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -20,6 +20,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/mfd/da903x.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -546,6 +547,15 @@ static inline void em_x270_init_ohci(void) {}
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static struct regulator *em_x270_sdio_ldo;
 
+static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Write protect on GPIO 95 */
+		GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
@@ -567,15 +577,7 @@ static int em_x270_mci_init(struct device *dev,
 		goto err_irq;
 	}
 
-	if (machine_is_em_x270()) {
-		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
-		if (err) {
-			dev_err(dev, "can't request MMC write protect: %d\n",
-				err);
-			goto err_gpio_wp;
-		}
-		gpio_direction_input(GPIO95_MMC_WP);
-	} else {
+	if (!machine_is_em_x270()) {
 		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
 		if (err) {
 			dev_err(dev, "can't request MMC power control : %d\n",
@@ -615,17 +617,10 @@ static void em_x270_mci_exit(struct device *dev, void *data)
 	free_irq(gpio_to_irq(mmc_cd), data);
 	regulator_put(em_x270_sdio_ldo);
 
-	if (machine_is_em_x270())
-		gpio_free(GPIO95_MMC_WP);
-	else
+	if (!machine_is_em_x270())
 		gpio_free(GPIO38_SD_PWEN);
 }
 
-static int em_x270_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO95_MMC_WP);
-}
-
 static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
@@ -635,15 +630,12 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.init 			= em_x270_mci_init,
 	.setpower 		= em_x270_mci_setpower,
 	.exit			= em_x270_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
 };
 
 static void __init em_x270_init_mmc(void)
 {
 	if (machine_is_em_x270())
-		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+		gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table);
 
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c5b2fb054f9..4764acca5480 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -90,9 +90,6 @@ static struct platform_device *devices[] __initdata = {
 #ifdef CONFIG_MMC_PXA
 static struct pxamci_platform_data gumstix_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect 	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
 };
 
 static void __init gumstix_mmc_init(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 88e0068f92a8..7bfc246a1d75 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -160,9 +160,6 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 
 static struct pxamci_platform_data idp_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
 };
 
 static void __init idp_init(void)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9e132b3e48c6..8e0b60a33026 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/smc91x.h>
@@ -51,8 +51,6 @@
 
 #include "generic.h"
 
-#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
-
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
@@ -278,13 +276,21 @@ static inline void littleton_init_keypad(void) {}
 static struct pxamci_platform_data littleton_mci_platform_data = {
 	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
+};
+
+static struct gpiod_lookup_table littleton_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		/* Card detect on MFP (gpio-pxa) GPIO 15 */
+		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO15,
+			    "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static void __init littleton_init_mmc(void)
 {
+	gpiod_add_lookup_table(&littleton_mci_gpio_table);
 	pxa_set_mci_info(&littleton_mci_platform_data);
 }
 #else
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index fe2ef9b78602..c576e8462043 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -440,9 +440,6 @@ static struct pxamci_platform_data lubbock_mci_platform_data = {
 	.init 			= lubbock_mci_init,
 	.get_ro			= lubbock_mci_get_ro,
 	.exit 			= lubbock_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
 };
 
 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 14c0f80bc9e7..08b079653c3f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -775,12 +775,31 @@ static struct pxamci_platform_data magician_mci_info = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init			= magician_mci_init,
 	.exit			= magician_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
 	.gpio_card_ro_invert	= 1,