[POWERPC] Remove APUS support from arch/ppc

Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

22 files changed, 5 insertions, 4022 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 6bdeeb70b157..c1b34eb383cf 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -573,24 +573,9 @@ choice
 
 	  Select PReP if configuring for a PReP machine.
 
-	  Select Gemini if configuring for a Synergy Microsystems' Gemini
-	  series Single Board Computer.  More information is available at:
-	  <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
-	  Select APUS if configuring for a PowerUP Amiga.  More information is
-	  available at: <http://linux-apus.sourceforge.net/>.
-
 config PPC_PREP
 	bool "PReP"
 
-config APUS
-	bool "Amiga-APUS"
-	depends on BROKEN
-	help
-	  Select APUS if configuring for a PowerUP Amiga.
-	  More information is available at:
-	  <http://linux-apus.sourceforge.net/>.
-
 config KATANA
 	bool "Artesyn-Katana"
 	help
@@ -1027,132 +1012,6 @@ config CMDLINE
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
-config AMIGA
-	bool
-	depends on APUS
-	default y
-	help
-	  This option enables support for the Amiga series of computers.
-
-config ZORRO
-	bool
-	depends on APUS
-	default y
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config ABSTRACT_CONSOLE
-	bool
-	depends on APUS
-	default y
-
-config APUS_FAST_EXCEPT
-	bool
-	depends on APUS
-	default y
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support"
-	depends on APUS && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config AMIGA_BUILTIN_SERIAL
-	tristate "Amiga builtin serial support"
-	depends on APUS
-	help
-	  If you want to use your Amiga's built-in serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config GVPIOEXT
-	tristate "GVP IO-Extender support"
-	depends on APUS
-	help
-	  If you want to use a GVP IO-Extender serial card in Linux, say Y.
-	  Otherwise, say N.
-
-config GVPIOEXT_LP
-	tristate "GVP IO-Extender parallel printer support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable driving a printer from the parallel port on your
-	  GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
-	tristate "GVP IO-Extender PLIP support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable doing IP over the parallel port on your GVP
-	  IO-Extender card, N otherwise.
-
-config MULTIFACE_III_TTY
-	tristate "Multiface Card III serial support"
-	depends on APUS
-	help
-	  If you want to use a Multiface III card's serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config A2232
-	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && APUS
-	---help---
-	  This option supports the 2232 7-port serial card shipped with the
-	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
-	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
-	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
-	  ports were connected with 8 pin DIN connectors on the card bracket,
-	  for which 8 pin to DB25 adapters were supplied. The card also had
-	  jumpers internally to toggle various pinning configurations.
-
-	  This driver can be built as a module; but then "generic_serial"
-	  will also be built as a module. This has to be loaded before
-	  "ser_a2232". If you want to do this, answer M here.
-
-config WHIPPET_SERIAL
-	tristate "Hisoft Whippet PCMCIA serial support"
-	depends on AMIGA_PCMCIA
-	help
-	  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
-	  is no listing for the Whippet in their Amiga section.
-
-config APNE
-	tristate "PCMCIA NE2000 support"
-	depends on AMIGA_PCMCIA
-	help
-	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
-	  say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called apne.
-
-config SERIAL_CONSOLE
-	bool "Support for serial port console"
-	depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
-
-config HEARTBEAT
-	bool "Use power LED as a heartbeat"
-	depends on APUS
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	depends on APUS
-
-source "drivers/zorro/Kconfig"
-
 if !44x || BROKEN
 source kernel/power/Kconfig
 endif
@@ -1227,8 +1086,7 @@ config MCA
 
 config PCI
 	bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
-	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+	default y if !40x && !CPM2 && !8xx && !83xx && !85xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help
 	  Find out whether your system includes a PCI bus. PCI is the name of
@@ -1284,10 +1142,6 @@ config 8260_PCI9_IDMA4
 
 endchoice
 
-config PCI_PERMEDIA
-	bool "PCI for Permedia2"
-	depends on !4xx && !8xx && APUS
-
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 0db66dcf0723..eee6264e8a04 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -69,7 +69,6 @@ core-$(CONFIG_83xx)		+= arch/ppc/platforms/83xx/
 core-$(CONFIG_85xx)		+= arch/ppc/platforms/85xx/
 core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/ppc/xmon/
-core-$(CONFIG_APUS)		+= arch/ppc/amiga/
 drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
 drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
 drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
diff --git a/arch/ppc/amiga/Makefile b/arch/ppc/amiga/Makefile
deleted file mode 100644
index 59fec0a3ac8e..000000000000
--- a/arch/ppc/amiga/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Linux arch/m68k/amiga source directory
-#
-
-obj-y		:= config.o amiints.o cia.o time.o bootinfo.o amisound.o \
-			chipram.o amiga_ksyms.o
-
-obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o
diff --git a/arch/ppc/amiga/amiga_ksyms.c b/arch/ppc/amiga/amiga_ksyms.c
deleted file mode 100644
index ec74e5b7a1ce..000000000000
--- a/arch/ppc/amiga/amiga_ksyms.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../m68k/amiga/amiga_ksyms.c"
diff --git a/arch/ppc/amiga/amiints.c b/arch/ppc/amiga/amiints.c
deleted file mode 100644
index 265fcd3c6ab2..000000000000
--- a/arch/ppc/amiga/amiints.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Amiga Linux interrupt handling code
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- *           this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- *           be careful that dev_id for this sources is unique since this the
- *           only possibility to distinguish between different handlers for
- *           free_irq. irq lists also have different irq flags:
- *           - IRQ_FLG_FAST: handler is inserted at top of list (after other
- *                           fast handlers)
- *           - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- *                           they're executed irq level is set to the previous
- *                           one, but handlers don't need to be reentrant, if
- *                           reentrance occurred, slow handlers will be just
- *                           called again.
- *           The whole interrupt handling for CIAs is moved to cia.c
- *           /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- *           interrupts, normal and fast handlers, fast handlers being
- *           marked with SA_INTERRUPT and runs with all other interrupts
- *           disabled. Normal interrupts disable their own source but
- *           run with all other interrupt sources enabled.
- *           PORTS and EXTER interrupts are always shared even if the
- *           drivers do not explicitly mark this when calling
- *           request_irq which they really should do.
- *           This is similar to the way interrupts are handled on all
- *           other architectures and makes a ton of sense besides
- *           having the advantage of making it easier to share
- *           drivers.
- *           /Jes
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amipcmcia.h>
-
-#ifdef CONFIG_APUS
-#include <asm/amigappc.h>
-#endif
-
-extern void cia_init_IRQ(struct ciabase *base);
-
-unsigned short ami_intena_vals[AMI_STD_IRQS] = {
-	IF_VERTB, IF_COPER, IF_AUD0, IF_AUD1, IF_AUD2, IF_AUD3, IF_BLIT,
-	IF_DSKSYN, IF_DSKBLK, IF_RBF, IF_TBE, IF_SOFT, IF_PORTS, IF_EXTER
-};
-static const unsigned char ami_servers[AMI_STD_IRQS] = {
-	1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1
-};
-
-static short ami_ablecount[AMI_IRQS];
-
-static void ami_badint(int irq, void *dev_id, struct pt_regs *fp)
-{
-/*	num_spurious += 1;*/
-}
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-__init
-void amiga_init_IRQ(void)
-{
-	int i;
-
-	for (i = 0; i < AMI_IRQS; i++)
-		ami_ablecount[i] = 0;
-
-	/* turn off PCMCIA interrupts */
-	if (AMIGAHW_PRESENT(PCMCIA))
-		gayle.inten = GAYLE_IRQ_IDE;
-
-	/* turn off all interrupts... */
-	amiga_custom.intena = 0x7fff;
-	amiga_custom.intreq = 0x7fff;
-
-#ifdef CONFIG_APUS
-	/* Clear any inter-CPU interrupt requests. Circumvents bug in
-           Blizzard IPL emulation HW (or so it appears). */
-	APUS_WRITE(APUS_INT_LVL, INTLVL_SETRESET | INTLVL_MASK);
-
-	/* Init IPL emulation. */
-	APUS_WRITE(APUS_REG_INT, REGINT_INTMASTER | REGINT_ENABLEIPL);
-	APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT);
-	APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET | IPLEMU_IPLMASK);
-#endif
-	/* ... and enable the master interrupt bit */
-	amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
-	cia_init_IRQ(&ciaa_base);
-	cia_init_IRQ(&ciab_base);
-}
-
-/*
- * Enable/disable a particular machine specific interrupt source.
- * Note that this may affect other interrupts in case of a shared interrupt.
- * This function should only be called for a _very_ short time to change some
- * internal data, that may not be changed by the interrupt at the same time.
- * ami_(enable|disable)_irq calls may also be nested.
- */
-
-void amiga_enable_irq(unsigned int irq)
-{
-	if (irq >= AMI_IRQS) {
-		printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
-		return;
-	}
-
-	ami_ablecount[irq]--;
-	if (ami_ablecount[irq]<0)
-		ami_ablecount[irq]=0;
-	else if (ami_ablecount[irq])
-		return;
-
-	/* No action for auto-vector interrupts */
-	if (irq >= IRQ_AMIGA_AUTO){
-		printk("%s: Trying to enable auto-vector IRQ %i\n",
-		       __FUNCTION__, irq - IRQ_AMIGA_AUTO);
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAA) {
-		cia_set_irq(irq, 0);
-		cia_able_irq(irq, 1);
-		return;
-	}
-
-	/* enable the interrupt */
-	amiga_custom.intena = IF_SETCLR | ami_intena_vals[irq];
-}
-
-void amiga_disable_irq(unsigned int irq)
-{
-	if (irq >= AMI_IRQS) {
-		printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
-		return;
-	}
-
-	if (ami_ablecount[irq]++)
-		return;
-
-	/* No action for auto-vector interrupts */
-	if (irq >= IRQ_AMIGA_AUTO) {
-		printk("%s: Trying to disable auto-vector IRQ %i\n",
-		       __FUNCTION__, irq - IRQ_AMIGA_AUTO);
-		return;
-	}
-
-	if (irq >= IRQ_AMIGA_CIAA) {
-		cia_able_irq(irq, 0);
-		return;
-	}
-
-	/* disable the interrupt */
-	amiga_custom.intena = ami_intena_vals[irq];
-}
-
-inline void amiga_do_irq(int irq, struct pt_regs *fp)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	struct irqaction *action = desc->action;
-
-	kstat_cpu(0).irqs[irq]++;
-	action->handler(irq, action->dev_id, fp);
-}
-
-void amiga_do_irq_list(int irq, struct pt_regs *fp)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	struct irqaction *action;
-
-	kstat_cpu(0).irqs[irq]++;
-
-	amiga_custom.intreq = ami_intena_vals[irq];
-
-	for (action = desc->action; action; action = action->next)
-		action->handler(irq, action->dev_id, fp);
-}
-
-/*
- * The builtin Amiga hardware interrupt handlers.
- */
-
-static void ami_int1(int irq, void *dev_id, struct pt_regs *fp)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial transmit buffer empty, interrupt */
-	if (ints & IF_TBE) {
-		amiga_custom.intreq = IF_TBE;
-		amiga_do_irq(IRQ_AMIGA_TBE, fp);
-	}
-
-	/* if floppy disk transfer complete, interrupt */
-	if (ints & IF_DSKBLK) {
-		amiga_custom.intreq = IF_DSKBLK;
-		amiga_do_irq(IRQ_AMIGA_DSKBLK, fp);
-	}
-
-	/* if software interrupt set, interrupt */
-	if (ints & IF_SOFT) {
-		amiga_custom.intreq = IF_SOFT;
-		amiga_do_irq(IRQ_AMIGA_SOFT, fp);
-	}
-}
-
-static void ami_int3(int irq, void *dev_id, struct pt_regs *fp)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if a blitter interrupt */
-	if (ints & IF_BLIT) {
-		amiga_custom.intreq = IF_BLIT;
-		amiga_do_irq(IRQ_AMIGA_BLIT, fp);
-	}
-
-	/* if a copper interrupt */
-	if (ints & IF_COPER) {
-		amiga_custom.intreq = IF_COPER;
-		amiga_do_irq(IRQ_AMIGA_COPPER, fp);
-	}
-
-	/* if a vertical blank interrupt */
-	if (ints & IF_VERTB)
-		amiga_do_irq_list(IRQ_AMIGA_VERTB, fp);
-}
-
-static void ami_int4(int irq, void *dev_id, struct pt_regs *fp)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if audio 0 interrupt */
-	if (ints & IF_AUD0) {
-		amiga_custom.intreq = IF_AUD0;
-		amiga_do_irq(IRQ_AMIGA_AUD0, fp);
-	}
-
-	/* if audio 1 interrupt */
-	if (ints & IF_AUD1) {
-		amiga_custom.intreq = IF_AUD1;
-		amiga_do_irq(IRQ_AMIGA_AUD1, fp);
-	}
-
-	/* if audio 2 interrupt */
-	if (ints & IF_AUD2) {
-		amiga_custom.intreq = IF_AUD2;
-		amiga_do_irq(IRQ_AMIGA_AUD2, fp);
-	}
-
-	/* if audio 3 interrupt */
-	if (ints & IF_AUD3) {
-		amiga_custom.intreq = IF_AUD3;
-		amiga_do_irq(IRQ_AMIGA_AUD3, fp);
-	}
-}
-
-static void ami_int5(int irq, void *dev_id, struct pt_regs *fp)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial receive buffer full interrupt */
-	if (ints & IF_RBF) {
-		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		amiga_do_irq(IRQ_AMIGA_RBF, fp);
-	}
-
-	/* if a disk sync interrupt */
-	if (ints & IF_DSKSYN) {
-		amiga_custom.intreq = IF_DSKSYN;
-		amiga_do_irq(IRQ_AMIGA_DSKSYN, fp);
-	}
-}
-
-static void ami_int7(int irq, void *dev_id, struct pt_regs *fp)
-{
-	panic ("level 7 interrupt received\n");
-}
-
-#ifdef CONFIG_APUS
-/* The PPC irq handling links all handlers requested on the same vector
-   and executes them in a loop. Having ami_badint at the end of the chain
-   is a bad idea. */
-struct irqaction amiga_sys_irqaction[AUTO_IRQS] = {
-	{ .handler = ami_badint, .name = "spurious int" },
-	{ .handler = ami_int1, .name = "int1 handler" },
-	{ 0, /* CIAA */ },
-	{ .handler = ami_int3, .name = "int3 handler" },
-	{ .handler = ami_int4, .name = "int4 handler" },
-	{ .handler = ami_int5, .name = "int5 handler" },
-	{ 0, /* CIAB */ },
-	{ .handler = ami_int7, .name = "int7 handler" },
-};
-#else
-void (*amiga_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = {
-	ami_badint, ami_int1, ami_badint, ami_int3,
-	ami_int4, ami_int5, ami_badint, ami_int7
-};
-#endif
diff --git a/arch/ppc/amiga/amisound.c b/arch/ppc/amiga/amisound.c
deleted file mode 100644
index 2b86cbef79f6..000000000000
--- a/arch/ppc/amiga/amisound.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../m68k/amiga/amisound.c"
diff --git a/arch/ppc/amiga/bootinfo.c b/arch/ppc/amiga/bootinfo.c
deleted file mode 100644
index efd869a3ed9b..000000000000
--- a/arch/ppc/amiga/bootinfo.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  Extracted from arch/m68k/kernel/setup.c.
- *  Should be properly generalized and put somewhere else.
- *                              Jesper
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-
-extern char cmd_line[CL_SIZE];
-
-extern int num_memory;
-extern int m68k_realnum_memory;
-extern struct mem_info memory[NUM_MEMINFO];
-extern struct mem_info m68k_memory[NUM_MEMINFO];
-extern struct mem_info ramdisk;
-
-extern int amiga_parse_bootinfo(const struct bi_record *);
-extern int atari_parse_bootinfo(const struct bi_record *);
-extern int mac_parse_bootinfo(const struct bi_record *);
-
-void __init parse_bootinfo(const struct bi_record *record)
-{
-    while (record->tag != BI_LAST) {
-	int unknown = 0;
-	const u_long *data = record->data;
-	switch (record->tag) {
-	    case BI_MACHTYPE:
-	    case BI_CPUTYPE:
-	    case BI_FPUTYPE:
-	    case BI_MMUTYPE:
-		/* Already set up by head.S */
-		break;
-
-	    case BI_MEMCHUNK:
-		if (num_memory < NUM_MEMINFO) {
-		    memory[num_memory].addr = data[0];
-		    memory[num_memory].size = data[1];
-		    num_memory++;
-
-		    /* FIXME: duplicate for m68k drivers. */
-		    m68k_memory[m68k_realnum_memory].addr = data[0];
-		    m68k_memory[m68k_realnum_memory].size = data[1];
-		    m68k_realnum_memory++;
-		} else
-		    printk("parse_bootinfo: too many memory chunks\n");
-		break;
-
-	    case BI_RAMDISK:
-		ramdisk.addr = data[0];
-		ramdisk.size = data[1];
-		break;
-
-	    case BI_COMMAND_LINE:
-		strlcpy(cmd_line, (const char *)data, sizeof(cmd_line));
-		break;
-
-	    default:
-		if (MACH_IS_AMIGA)
-		    unknown = amiga_parse_bootinfo(record);
-		else if (MACH_IS_ATARI)
-		    unknown = atari_parse_bootinfo(record);
-		else if (MACH_IS_MAC)
-		    unknown = mac_parse_bootinfo(record);
-		else
-		    unknown = 1;
-	}
-	if (unknown)
-	    printk("parse_bootinfo: unknown tag 0x%04x ignored\n",
-		   record->tag);
-	record = (struct bi_record *)((u_long)record+record->size);
-    }
-}
diff --git a/arch/ppc/amiga/chipram.c b/arch/ppc/amiga/chipram.c
deleted file mode 100644
index e6ab3c6b223c..000000000000
--- a/arch/ppc/amiga/chipram.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../m68k/amiga/chipram.c"
diff --git a/arch/ppc/amiga/cia.c b/arch/ppc/amiga/cia.c
deleted file mode 100644
index 9558f2f40e64..000000000000
--- a/arch/ppc/amiga/cia.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- *  Copyright (C) 1996 Roman Zippel
- *
- *  The concept of some functions bases on the original Amiga OS function
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-struct ciabase {
-	volatile struct CIA *cia;
-	u_char icr_mask, icr_data;
-	u_short int_mask;
-	int handler_irq, cia_irq, server_irq;
-	char *name;
-} ciaa_base = {
-	&ciaa, 0, 0, IF_PORTS,
-	IRQ_AMIGA_AUTO_2, IRQ_AMIGA_CIAA,
-	IRQ_AMIGA_PORTS,
-	"CIAA handler"
-}, ciab_base = {
-	&ciab, 0, 0, IF_EXTER,
-	IRQ_AMIGA_AUTO_6, IRQ_AMIGA_CIAB,
-	IRQ_AMIGA_EXTER,
-	"CIAB handler"
-};
-
-#define CIA_SET_BASE_ADJUST_IRQ(base, irq)	\
-do {						\
-	if (irq >= IRQ_AMIGA_CIAB) {		\
-		base = &ciab_base;		\
-		irq -= IRQ_AMIGA_CIAB;		\
-	} else {				\
-		base = &ciaa_base;		\
-		irq -= IRQ_AMIGA_CIAA;		\
-	}					\
-} while (0)
-
-/*
- *  Cause or clear CIA interrupts, return old interrupt status.
- */
-
-static unsigned char cia_set_irq_private(struct ciabase *base,
-					 unsigned char mask)
-{
-	u_char old;
-
-	old = (base->icr_data |= base->cia->icr);
-	if (mask & CIA_ICR_SETCLR)
-		base->icr_data |= mask;
-	else
-		base->icr_data &= ~mask;
-	if (base->icr_data & base->icr_mask)
-		amiga_custom.intreq = IF_SETCLR | base->int_mask;
-	return old & base->icr_mask;
-}
-
-unsigned char cia_set_irq(unsigned int irq, int set)
-{
-	struct ciabase *base;
-	unsigned char mask;
-
-	if (irq >= IRQ_AMIGA_CIAB)
-		mask = (1 << (irq - IRQ_AMIGA_CIAB));
-	else
-		mask = (1 << (irq - IRQ_AMIGA_CIAA));
-	mask |= (set) ? CIA_ICR_SETCLR : 0;
-
-	CIA_SET_BASE_ADJUST_IRQ(base, irq);
-
-	return cia_set_irq_private(base, mask);
-}
-
-unsigned char cia_get_irq_mask(unsigned int irq)
-{
-	struct ciabase *base;
-
-	CIA_SET_BASE_ADJUST_IRQ(base, irq);
-
-	return base->cia->icr;
-}
-
-/*
- *  Enable or disable CIA interrupts, return old interrupt mask.
- */
-
-static unsigned char cia_able_irq_private(struct ciabase *base,
-					  unsigned char mask)
-{
-	u_char old;
-
-	old = base->icr_mask;
-	base->icr_data |= base->cia->icr;
-	base->cia->icr = mask;
-	if (mask & CIA_ICR_SETCLR)
-		base->icr_mask |= mask;
-	else
-		base->icr_mask &= ~mask;
-	base->icr_mask &= CIA_ICR_ALL;
-
-	if (base->icr_data & base->icr_mask)
-		amiga_custom.intreq = IF_SETCLR | base->int_mask;
-	return old;
-}
-
-unsigned char cia_able_irq(unsigned int irq, int enable)
-{
-	struct ciabase *base;
-	unsigned char mask;
-
-	if (irq >= IRQ_AMIGA_CIAB)
-		mask = (1 << (irq - IRQ_AMIGA_CIAB));
-	else
-		mask = (1 << (irq - IRQ_AMIGA_CIAA));
-	mask |= (enable) ? CIA_ICR_SETCLR : 0;
-
-	CIA_SET_BASE_ADJUST_IRQ(base, irq);
-
-	return cia_able_irq_private(base, mask);
-}
-
-static void cia_handler(int irq, void *dev_id, struct pt_regs *fp)
-{
-	struct ciabase *base = (struct ciabase *)dev_id;
-	irq_desc_t *desc;
-	struct irqaction *action;
-	int i;
-	unsigned char ints;
-
-	irq = base->cia_irq;
-	desc = irq_desc + irq;
-	ints = cia_set_irq_private(base, CIA_ICR_ALL);
-	amiga_custom.intreq = base->int_mask;
-	for (i = 0; i < CIA_IRQS; i++, irq++) {
-		if (ints & 1) {
-			kstat_cpu(0).irqs[irq]++;
-			action = desc->action;
-			action->handler(irq, action->dev_id, fp);
-		}
-		ints >>= 1;
-		desc++;
-	}
-	amiga_do_irq_list(base->server_irq, fp);
-}
-
-void __init cia_init_IRQ(struct ciabase *base)
-{
-	extern struct irqaction amiga_sys_irqaction[AUTO_IRQS];
-	struct irqaction *action;
-
-	/* clear any pending interrupt and turn off all interrupts */
-	cia_set_irq_private(base, CIA_ICR_ALL);
-	cia_able_irq_private(base, CIA_ICR_ALL);
-
-	/* install CIA handler */
-	action = &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO];
-	action->handler = cia_handler;
-	action->dev_id = base;
-	action->name = base->name;
-	setup_irq(base->handler_irq, &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]);
-
-	amiga_custom.intena = IF_SETCLR | base->int_mask;
-}
diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c
deleted file mode 100644
index bc50ed11957d..000000000000
--- a/arch/ppc/amiga/config.c
+++ /dev/null
@@ -1,953 +0,0 @@
-#define m68k_debug_device debug_device
-
-/*
- *  Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Miscellaneous Amiga stuff
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kd.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#ifdef CONFIG_ZORRO
-#include <linux/zorro.h>
-#endif
-
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-
-unsigned long powerup_PCI_present;
-unsigned long powerup_BPPCPLUS_present;
-unsigned long amiga_model;
-unsigned long amiga_eclock;
-unsigned long amiga_masterclock;
-unsigned long amiga_colorclock;
-unsigned long amiga_chipset;
-unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
-struct amiga_hw_present amiga_hw_present;
-
-static char s_a500[] __initdata = "A500";
-static char s_a500p[] __initdata = "A500+";
-static char s_a600[] __initdata = "A600";
-static char s_a1000[] __initdata = "A1000";
-static char s_a1200[] __initdata = "A1200";
-static char s_a2000[] __initdata = "A2000";
-static char s_a2500[] __initdata = "A2500";
-static char s_a3000[] __initdata = "A3000";
-static char s_a3000t[] __initdata = "A3000T";
-static char s_a3000p[] __initdata = "A3000+";
-static char s_a4000[] __initdata = "A4000";
-static char s_a4000t[] __initdata = "A4000T";
-static char s_cdtv[] __initdata = "CDTV";
-static char s_cd32[] __initdata = "CD32";
-static char s_draco[] __initdata = "Draco";
-static char *amiga_models[] __initdata = {
-    s_a500, s_a500p, s_a600, s_a1000, s_a1200, s_a2000, s_a2500, s_a3000,
-    s_a3000t, s_a3000p, s_a4000, s_a4000t, s_cdtv, s_cd32, s_draco,
-};
-
-static char amiga_model_name[13] = "Amiga ";
-
-extern char m68k_debug_device[];
-
-static void amiga_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
-/* amiga specific irq functions */
-extern void amiga_init_IRQ (void);
-extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
-extern int amiga_request_irq (unsigned int irq,
-			      void (*handler)(int, void *, struct pt_regs *),
-                              unsigned long flags, const char *devname,
-			      void *dev_id);
-extern void amiga_free_irq (unsigned int irq, void *dev_id);
-extern void amiga_enable_irq (unsigned int);
-extern void amiga_disable_irq (unsigned int);
-static void amiga_get_model(char *model);
-static int amiga_get_hardware_list(char *buffer);
-/* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset (void);
-static void a3000_gettod (int *, int *, int *, int *, int *, int *);
-static void a2000_gettod (int *, int *, int *, int *, int *, int *);
-static int amiga_hwclk (int, struct hwclk_time *);
-static int amiga_set_clock_mmss (unsigned long);
-static void amiga_reset (void);
-extern void amiga_init_sound(void);
-static void amiga_savekmsg_init(void);
-static void amiga_mem_console_write(struct console *co, const char *b,
-				    unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count);
-static void amiga_debug_init(void);
-#ifdef CONFIG_HEARTBEAT
-static void amiga_heartbeat(int on);
-#endif
-
-static struct console amiga_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-
-    /*
-     *  Motherboard Resources present in all Amiga models
-     */
-
-static struct {
-    struct resource _ciab, _ciaa, _custom, _kickstart;
-} mb_resources = {
-//    { "Ranger Memory", 0x00c00000, 0x00c7ffff },
-    ._ciab =	  { "CIA B", 0x00bfd000, 0x00bfdfff },
-    ._ciaa =	  { "CIA A", 0x00bfe000, 0x00bfefff },
-    ._custom =	  { "Custom I/O", 0x00dff000, 0x00dfffff },
-    ._kickstart = { "Kickstart ROM", 0x00f80000, 0x00ffffff }
-};
-
-static struct resource rtc_resource = {
-    NULL, 0x00dc0000, 0x00dcffff
-};
-
-static struct resource ram_resource[NUM_MEMINFO];
-
-
-    /*
-     *  Parse an Amiga-specific record in the bootinfo
-     */
-
-int amiga_parse_bootinfo(const struct bi_record *record)
-{
-    int unknown = 0;
-    const unsigned long *data = record->data;
-
-    switch (record->tag) {
-	case BI_AMIGA_MODEL:
-	{