Merge tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Core:
   - Ground work for the new Power9 MMU from Aneesh Kumar K.V
   - Optimise FP/VMX/VSX context switching from Anton Blanchard

  Misc:
   - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica
     Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling,
     Andrew Donnellan
   - Allow wrapper to work on non-english system from Laurent Vivier
   - Add rN aliases to the pt_regs_offset table from Rashmica Gupta
   - Fix module autoload for rackmeter & axonram drivers from Luis de
     Bethencourt
   - Include KVM guest test in all interrupt vectors from Paul Mackerras
   - Fix DSCR inheritance over fork() from Anton Blanchard
   - Make value-returning atomics & {cmp}xchg* & their atomic_ versions
     fully ordered from Boqun Feng
   - Print MSR TM bits in oops messages from Michael Neuling
   - Add TM signal return & invalid stack selftests from Michael Neuling
   - Limit EPOW reset event warnings from Vipin K Parashar
   - Remove the Cell QPACE code from Rashmica Gupta
   - Append linux_banner to exception information in xmon from Rashmica
     Gupta
   - Add selftest to check if VSRs are corrupted from Rashmica Gupta
   - Remove broken GregorianDay() from Daniel Axtens
   - Import Anton's context_switch2 benchmark into selftests from
     Michael Ellerman
   - Add selftest script to test HMI functionality from Daniel Axtens
   - Remove obsolete OPAL v2 support from Stewart Smith
   - Make enter_rtas() private from Michael Ellerman
   - PPR exception cleanups from Michael Ellerman
   - Add page soft dirty tracking from Laurent Dufour
   - Add support for Nvlink NPUs from Alistair Popple
   - Add support for kexec on 476fpe from Alistair Popple
   - Enable kernel CPU dlpar from sysfs from Nathan Fontenot
   - Copy only required pieces of the mm_context_t to the paca from
     Michael Neuling
   - Add a kmsg_dumper that flushes OPAL console output on panic from
     Russell Currey
   - Implement save_stack_trace_regs() to enable kprobe stack tracing
     from Steven Rostedt
   - Add HWCAP bits for Power9 from Michael Ellerman
   - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
   - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
   - scripts/recordmcount.pl: support data in text section on powerpc
     from Ulrich Weigand
   - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand

  cxl:
   - cxl: Fix possible idr warning when contexts are released from
     Vaibhav Jain
   - cxl: use correct operator when writing pcie config space values
     from Andrew Donnellan
   - cxl: Fix DSI misses when the context owning task exits from Vaibhav
     Jain
   - cxl: fix build for GCC 4.6.x from Brian Norris
   - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
   - cxl: Enable PCI device ID for future IBM CXL adapter from Uma
     Krishnan

  Freescale:
   - Freescale updates from Scott: Highlights include moving QE code out
     of arch/powerpc (to be shared with arm), device tree updates, and
     minor fixes"

* tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits)
  powerpc/module: Handle R_PPC64_ENTRY relocations
  scripts/recordmcount.pl: support data in text section on powerpc
  powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
  powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff
  powerpc/mm: Fix _PAGE_PTE breaking swapoff
  cxl: Enable PCI device ID for future IBM CXL adapter
  cxl: use -Werror only with CONFIG_PPC_WERROR
  cxl: fix build for GCC 4.6.x
  powerpc: Add HWCAP bits for Power9
  powerpc/powernv: Reserve PE#0 on NPU
  powerpc/powernv: Change NPU PE# assignment
  powerpc/powernv: Fix update of NVLink DMA mask
  powerpc/powernv: Remove misleading comment in pci.c
  powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing
  powerpc: Fix build break due to paca mm_context_t changes
  cxl: Fix DSI misses when the context owning task exits
  MAINTAINERS: Update Scott Wood's e-mail address
  powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery()
  powerpc: Fix style of self-test config prompts
  powerpc/powernv: Only delay opal_rtc_read() retry when necessary
  ...

16 files changed, 15 insertions, 3022 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 5b492a6438ff..bd6bd729969c 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_FSL_85XX_CACHE_SRAM)	+= fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
 obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
-obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
 obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 				   mv64x60_udbg.o
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 7a399b4d60a0..c713b349d967 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -313,6 +313,7 @@ static const struct of_device_id axon_ram_device_id[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, axon_ram_device_id);
 
 static struct platform_driver axon_ram_driver = {
 	.probe		= axon_ram_probe,
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e00a5ee58fd7..9d32465eddb1 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -27,8 +27,8 @@
 
 #include <asm/udbg.h>
 #include <asm/io.h>
-#include <asm/rheap.h>
 #include <asm/cpm.h>
+#include <soc/fsl/qe/qe.h>
 
 #include <mm/mmu_decl.h>
 
@@ -65,162 +65,6 @@ void __init udbg_init_cpm(void)
 }
 #endif
 
-static spinlock_t cpm_muram_lock;
-static rh_block_t cpm_boot_muram_rh_block[16];
-static rh_info_t cpm_muram_info;
-static u8 __iomem *muram_vbase;
-static phys_addr_t muram_pbase;
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-
-int cpm_muram_init(void)
-{
-	struct device_node *np;
-	struct resource r;
-	u32 zero[OF_MAX_ADDR_CELLS] = {};
-	resource_size_t max = 0;
-	int i = 0;
-	int ret = 0;
-
-	if (muram_pbase)
-		return 0;
-
-	spin_lock_init(&cpm_muram_lock);
-	/* initialize the info header */
-	rh_init(&cpm_muram_info, 1,
-	        sizeof(cpm_boot_muram_rh_block) /
-	        sizeof(cpm_boot_muram_rh_block[0]),
-	        cpm_boot_muram_rh_block);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
-	if (!np) {
-		/* try legacy bindings */
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			printk(KERN_ERR "Cannot find CPM muram data node");
-			ret = -ENODEV;
-			goto out;
-		}
-	}
-
-	muram_pbase = of_translate_address(np, zero);
-	if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
-		printk(KERN_ERR "Cannot translate zero through CPM muram node");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	while (of_address_to_resource(np, i++, &r) == 0) {
-		if (r.end > max)
-			max = r.end;
-
-		rh_attach_region(&cpm_muram_info, r.start - muram_pbase,
-				 resource_size(&r));
-	}
-
-	muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
-	if (!muram_vbase) {
-		printk(KERN_ERR "Cannot map CPM muram");
-		ret = -ENOMEM;
-	}
-
-out:
-	of_node_put(np);
-	return ret;
-}
-
-/**
- * cpm_muram_alloc - allocate the requested size worth of multi-user ram
- * @size: number of bytes to allocate
- * @align: requested alignment, in bytes
- *
- * This function returns an offset into the muram area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	cpm_muram_info.alignment = align;
-	start = rh_alloc(&cpm_muram_info, size, "commproc");
-	if (!IS_ERR_VALUE(start))
-		memset_io(cpm_muram_addr(start), 0, size);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc);
-
-/**
- * cpm_muram_free - free a chunk of multi-user ram
- * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
- */
-int cpm_muram_free(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	ret = rh_free(&cpm_muram_info, offset);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_muram_free);
-
-/**
- * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
- * @offset: the offset into the muram area to reserve
- * @size: the number of bytes to reserve
- *
- * This function returns "start" on success, -ENOMEM on failure.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	cpm_muram_info.alignment = 1;
-	start = rh_alloc_fixed(&cpm_muram_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc_fixed);
-
-/**
- * cpm_muram_addr - turn a muram offset into a virtual address
- * @offset: muram offset to convert
- */
-void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return muram_vbase + offset;
-}
-EXPORT_SYMBOL(cpm_muram_addr);
-
-unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return addr - (void __iomem *)muram_vbase;
-}
-EXPORT_SYMBOL(cpm_muram_offset);
-
-/**
- * cpm_muram_dma - turn a muram virtual address into a DMA address
- * @offset: virtual address from cpm_muram_addr() to convert
- */
-dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
-	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
-}
-EXPORT_SYMBOL(cpm_muram_dma);
-
 #if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
 
 struct cpm2_ioports {
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 38138cf8d33e..47f781059eeb 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -243,8 +243,6 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
 	if (status & LTESR_CS)
 		dev_err(ctrl->dev, "Chip select error: "
 			"LTESR 0x%08X\n", status);
-	if (status & LTESR_UPM)
-		;
 	if (status & LTESR_FCT) {
 		dev_err(ctrl->dev, "FCM command time-out: "
 			"LTESR 0x%08X\n", status);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index a1ac80b3041a..c69e88e91459 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -218,6 +218,19 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	 */
 	setup_inbound = !is_kdump();
 
+	if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) {
+		/*
+		 * BSC9132 Rev1.0 has an issue where all the PEX inbound
+		 * windows have implemented the default target value as 0xf
+		 * for CCSR space.In all Freescale legacy devices the target
+		 * of 0xf is reserved for local memory space. 9132 Rev1.0
+		 * now has local mempry space mapped to target 0x0 instead of
+		 * 0xf. Hence adding a workaround to remove the target 0xf
+		 * defined for memory space from Inbound window attributes.
+		 */
+		piwar &= ~PIWAR_TGI_LOCAL;
+	}
+
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
 			win_idx = 2;
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
deleted file mode 100644
index 3c251993bacd..000000000000
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# QE Communication options
-#
-
-config UCC_SLOW
-	bool
-	default y if SERIAL_QE
-	help
-	  This option provides qe_lib support to UCC slow
-	  protocols: UART, BISYNC, QMC
-
-config UCC_FAST
-	bool
-	default y if UCC_GETH
-	help
-	  This option provides qe_lib support to UCC fast
-	  protocols: HDLC, Ethernet, ATM, transparent
-
-config UCC
-	bool
-	default y if UCC_FAST || UCC_SLOW
-
-config QE_USB
-	bool
-	default y if USB_FSL_QE
-	help
-	  QE USB Controller support
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
deleted file mode 100644
index f1855c185291..000000000000
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of QE
-#
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
-
-obj-$(CONFIG_UCC)	+= ucc.o
-obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
-obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
-obj-$(CONFIG_QE_USB)	+= usb.o
-obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
deleted file mode 100644
index 521e67a49dc4..000000000000
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * QUICC Engine GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/qe.h>
-
-struct qe_gpio_chip {
-	struct of_mm_gpio_chip mm_gc;
-	spinlock_t lock;
-
-	unsigned long pin_flags[QE_PIO_PINS];
-#define QE_PIN_REQUESTED 0
-
-	/* shadowed data register to clear/set bits safely */
-	u32 cpdata;
-
-	/* saved_regs used to restore dedicated functions */
-	struct qe_pio_regs saved_regs;
-};
-
-static inline struct qe_gpio_chip *
-to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
-{
-	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
-}
-
-static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-
-	qe_gc->cpdata = in_be32(&regs->cpdata);
-	qe_gc->saved_regs.cpdata = qe_gc->cpdata;
-	qe_gc->saved_regs.cpdir1 = in_be32(&regs->cpdir1);
-	qe_gc->saved_regs.cpdir2 = in_be32(&regs->cpdir2);
-	qe_gc->saved_regs.cppar1 = in_be32(&regs->cppar1);
-	qe_gc->saved_regs.cppar2 = in_be32(&regs->cppar2);
-	qe_gc->saved_regs.cpodr = in_be32(&regs->cpodr);
-}
-
-static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
-	return in_be32(&regs->cpdata) & pin_mask;
-}
-
-static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-	unsigned long flags;
-	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	if (val)
-		qe_gc->cpdata |= pin_mask;
-	else
-		qe_gc->cpdata &= ~pin_mask;
-
-	out_be32(&regs->cpdata, qe_gc->cpdata);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-
-static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	return 0;
-}
-
-static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	unsigned long flags;
-
-	qe_gpio_set(gc, gpio, val);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	return 0;
-}
-
-struct qe_pin {
-	/*
-	 * The qe_gpio_chip name is unfortunate, we should change that to
-	 * something like qe_pio_controller. Someday.
-	 */
-	struct qe_gpio_chip *controller;
-	int num;
-};
-
-/**
- * qe_pin_request - Request a QE pin
- * @np:		device node to get a pin from
- * @index:	index of a pin in the device tree
- * Context:	non-atomic
- *
- * This function return qe_pin so that you could use it with the rest of
- * the QE Pin Multiplexing API.
- */
-struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
-	struct qe_pin *qe_pin;
-	struct gpio_chip *gc;
-	struct of_mm_gpio_chip *mm_gc;
-	struct qe_gpio_chip *qe_gc;
-	int err;
-	unsigned long flags;
-
-	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
-	if (!qe_pin) {
-		pr_debug("%s: can't allocate memory\n", __func__);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	err = of_get_gpio(np, index);
-	if (err < 0)
-		goto err0;
-	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
-		goto err0;
-
-	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
-		pr_debug("%s: tried to get a non-qe pin\n", __func__);
-		err = -EINVAL;
-		goto err0;
-	}
-
-	mm_gc = to_of_mm_gpio_chip(gc);
-	qe_gc = to_qe_gpio_chip(mm_gc);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	err -= gc->base;
-	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
-		qe_pin->controller = qe_gc;
-		qe_pin->num = err;
-		err = 0;
-	} else {
-		err = -EBUSY;
-	}
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	if (!err)
-		return qe_pin;
-err0:
-	kfree(qe_pin);
-	pr_debug("%s failed with status %d\n", __func__, err);
-	return ERR_PTR(err);
-}
-EXPORT_SYMBOL(qe_pin_request);
-
-/**
- * qe_pin_free - Free a pin
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function frees the qe_pin structure and makes a pin available
- * for further qe_pin_request() calls.
- */
-void qe_pin_free(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	unsigned long flags;
-	const int pin = qe_pin->num;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-	test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	kfree(qe_pin);
-}
-EXPORT_SYMBOL(qe_pin_free);
-
-/**
- * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function resets a pin to a dedicated peripheral function that
- * has been set up by the firmware.
- */
-void qe_pin_set_dedicated(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
-	struct qe_pio_regs *sregs = &qe_gc->saved_regs;
-	int pin = qe_pin->num;
-	u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
-	u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
-	bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	if (second_reg) {
-		clrsetbits_be32(&regs->cpdir2, mask2, sregs->cpdir2 & mask2);
-		clrsetbits_be32(&regs->cppar2, mask2, sregs->cppar2 & mask2);
-	} else {
-		clrsetbits_be32(&regs->cpdir1, mask2, sregs->cpdir1 & mask2);
-		clrsetbits_be32(&regs->cppar1, mask2, sregs->cppar1 & mask2);
-	}
-
-	if (sregs->cpdata & mask1)
-		qe_gc->cpdata |= mask1;
-	else
-		qe_gc->cpdata &= ~mask1;
-
-	out_be32(&regs->cpdata, qe_gc->cpdata);
-	clrsetbits_be32(&regs->cpodr, mask1, sregs->cpodr & mask1);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_dedicated);
-
-/**
- * qe_pin_set_gpio - Set a pin to the GPIO mode
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function sets a pin to the GPIO mode.
- */
-void qe_pin_set_gpio(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	/* Let's make it input by default, GPIO API is able to change that. */
-	__par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_gpio);
-
-static int __init qe_add_gpiochips(void)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
-		int ret;
-		struct qe_gpio_chip *qe_gc;
-		struct of_mm_gpio_chip *mm_gc;
-		struct gpio_chip *gc;
-
-		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
-		if (!qe_gc) {
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		spin_lock_init(&qe_gc->lock);
-
-		mm_gc = &qe_gc->mm_gc;
-		gc = &mm_gc->gc;
-
-		mm_gc->save_regs = qe_gpio_save_regs;
-		gc->ngpio = QE_PIO_PINS;
-		gc->direction_input = qe_gpio_dir_in;
-		gc->direction_output = qe_gpio_dir_out;
-		gc->get = qe_gpio_get;
-		gc->set = qe_gpio_set;
-
-		ret = of_mm_gpiochip_add(np, mm_gc);
-		if (ret)
-			goto err;
-		continue;
-err:
-		pr_err("%s: registration failed with status %d\n",
-		       np->full_name, ret);
-		kfree(qe_gc);
-		/* try others anyway */
-	}
-	return 0;
-}
-arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
deleted file mode 100644
index c2518cdb7ddb..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
- *
- * Description:
- * General Purpose functions for the global management of the
- * QUICC Engine (QE).
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/mod_devicetable.h>
-#include <linux/of_platform.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
-
-static void qe_snums_init(void);
-static int qe_sdma_init(void);
-
-static DEFINE_SPINLOCK(qe_lock);
-DEFINE_SPINLOCK(cmxgcr_lock);
-EXPORT_SYMBOL(cmxgcr_lock);
-
-/* QE snum state */
-enum qe_snum_state {
-	QE_SNUM_STATE_USED,
-	QE_SNUM_STATE_FREE
-};
-
-/* QE snum */
-struct qe_snum {
-	u8 num;
-	enum qe_snum_state state;
-};
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-struct qe_immap __iomem *qe_immr;
-EXPORT_SYMBOL(qe_immr);
-
-static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
-static unsigned int qe_num_of_snum;
-
-static phys_addr_t qebase = -1;
-
-phys_addr_t get_qe_base(void)
-{
-	struct device_node *qe;
-	int size;
-	const u32 *prop;
-
-	if (qebase != -1)
-		return qebase;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return qebase;
-	}
-
-	prop = of_get_property(qe, "reg", &size);
-	if (prop && size >= sizeof(*prop))
-		qebase = of_translate_address(qe, prop);
-	of_node_put(qe);
-
-	return qebase;
-}
-
-EXPORT_SYMBOL(get_qe_base);
-
-void qe_reset(void)
-{
-	if (qe_immr == NULL)
-		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
-
-	qe_snums_init();
-
-	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
-		     QE_CR_PROTOCOL_UNSPECIFIED, 0);
-
-	/* Reclaim the MURAM memory for our use. */
-	qe_muram_init();
-
-	if (qe_sdma_init())
-		panic("sdma init failed!");
-}
-
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
-{
-	unsigned long flags;
-	u8 mcn_shift = 0, dev_shift = 0;
-	u32 ret;
-
-	spin_lock_irqsave(&qe_lock, flags);
-	if (cmd == QE_RESET) {
-		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
-	} else {
-		if (cmd == QE_ASSIGN_PAGE) {
-			/* Here device is the SNUM, not sub-block */
-			dev_shift = QE_CR_SNUM_SHIFT;
-		} else if (cmd == QE_ASSIGN_RISC) {
-			/* Here device is the SNUM, and mcnProtocol is
-			 * e_QeCmdRiscAssignment value */
-			dev_shift = QE_CR_SNUM_SHIFT;
-			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
-		} else {
-			if (device == QE_CR_SUBBLOCK_USB)
-				mcn_shift = QE_CR_MCN_USB_SHIFT;
-			else
-				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
-		}
-
-		out_be32(&qe_immr->cp.cecdr, cmd_input);
-		out_be32(&qe_immr->cp.cecr,
-			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
-			  mcn_protocol << mcn_shift));
-	}
-
-	/* wait for the QE_CR_FLG to clear */
-	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
-			   100, 0);
-	/* On timeout (e.g. failure), the expression will be false (ret == 0),
-	   otherwise it will be true (ret == 1). */
-	spin_unlock_irqrestore(&qe_lock, flags);
-
-	return ret == 1;
-}
-EXPORT_SYMBOL(qe_issue_cmd);
-
-/* Set a baud rate generator. This needs lots of work. There are
- * 16 BRGs, which can be connected to the QE channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The BRG clock is the QE clock divided by 2.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-static unsigned int brg_clk = 0;
-
-unsigned int qe_get_brg_clk(void)
-{
-	struct device_node *qe;
-	int size;
-	const u32 *prop;
-
-	if (brg_clk)
-		return brg_clk;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return brg_clk;
-	}
-
-	prop = of_get_property(qe, "brg-frequency", &size);
-	if (prop && size == sizeof(*prop))
-		brg_clk = *prop;
-
-	of_node_put(qe);
-
-	return brg_clk;
-}
-EXPORT_SYMBOL(qe_get_brg_clk);
-
-/* Program the BRG to the given sampling rate and multiplier
- *
- * @brg: the BRG, QE_BRG1 - QE_BRG16
- * @rate: the desired sampling rate
- * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
- * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
- * then 'multiplier' should be 8.
- */
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
-{
-	u32 divisor, tempval;
-	u32 div16 = 0;
-
-	if ((brg < QE_BRG1) || (brg > QE_BRG16))
-		return -EINVAL;
-
-	divisor = qe_get_brg_clk() / (rate * multiplier);
-
-	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
-		div16 = QE_BRGC_DIV16;
-		divisor /= 16;
-	}
-
-	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
-	   that the BRG divisor must be even if you're not using divide-by-16
-	   mode. */
-	if (!div16 && (divisor & 1) && (divisor > 3))
-		divisor++;
-
-	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
-		QE_BRGC_ENABLE | div16;
-
-	out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_setbrg);
-
-/* Convert a string to a QE clock source enum
- *
- * This function takes a string, typically from a property in the device
- * tree, and returns the corresponding "enum qe_clock" value.
-*/
-enum qe_clock qe_clock_source(const char *source)
-{
-	unsigned int i;
-
-	if (strcasecmp(source, "none") == 0)
-		return QE_CLK_NONE;
-
-	if (strncasecmp(source, "brg", 3) == 0) {
-		i = simple_strtoul(source + 3, NULL, 10);
-		if ((i >= 1) && (i <= 16))
-			return (QE_BRG1 - 1) + i;
-		else
-			return QE_CLK_DUMMY;
-	}
-
-	if (strncasecmp(source, "clk", 3) == 0) {
-		i = simple_strtoul(source + 3, NULL, 10);
-		if ((i >= 1) && (i <= 24))
-			return (QE_CLK1 - 1) + i;
-		else
-			return QE_CLK_DUMMY;
-	}
-
-	return QE_CLK_DUMMY;
-}
-EXPORT_SYMBOL(qe_clock_source);
-
-/* Initialize SNUMs (thread serial numbers) according to
- * QE Module Control chapter, SNUM table
- */
-static void qe_snums_init(void)
-{
-	int i;
-	static const u8 snum_init_76[] = {
-		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
-		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
-		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
-		0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
-		0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
-		0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
-		0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
-		0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
-		0xF4, 0xF5, 0xFC, 0xFD,
-	};
-	static const u8 snum_init_46[] = {
-		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
-		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
-		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
-		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
-		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
-	};
-	static const u8 *snum_init;
-
-	qe_num_of_snum = qe_get_num_of_snums();
-
-	if (qe_num_of_snum == 76)
-		snum_init = snum_init_76;
-	else
-		snum_init = snum_init_46;
-
-	for (i = 0; i < qe_num_of_snum; i++) {
-		snums[i].num = snum_init[i];
-		snums[i].state = QE_SNUM_STATE_FREE;
-	}
-}
-
-int qe_get_snum(void)
-{
-	unsigned long flags;
-	int snum = -EBUSY;
-	int i;
-
-	spin_lock_irqsave(&qe_lock, flags);
-	for (i = 0; i < qe_num_of_snum; i++) {
-		if (snums[i].state == QE_SNUM_STATE_FREE) {
-			snums[i].state = QE_SNUM_STATE_USED;
-			snum = snums[i].num;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&qe_lock, flags);
-
-	return snum;
-}
-EXP