[CRIS] Move header files from include to arch/cris/include.

Change all users of header files to correct path.
Remove some unneeded headers for arch-v32.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

92 files changed, 4731 insertions, 0 deletions

diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
new file mode 100644
index 000000000000..d5b631935ec8
--- /dev/null
+++ b/arch/cris/include/asm/Kbuild
@@ -0,0 +1,11 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += arch-v10/
+header-y += arch-v32/
+
+header-y += ethernet.h
+header-y += rtc.h
+header-y += sync_serial.h
+
+unifdef-y += etraxgpio.h
+unifdef-y += rs485.h
diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h
new file mode 100644
index 000000000000..f71ea686a2ea
--- /dev/null
+++ b/arch/cris/include/asm/atomic.h
@@ -0,0 +1,164 @@
+/* $Id: atomic.h,v 1.3 2001/07/25 16:15:19 bjornw Exp $ */
+
+#ifndef __ASM_CRIS_ATOMIC__
+#define __ASM_CRIS_ATOMIC__
+
+#include <linux/compiler.h>
+
+#include <asm/system.h>
+#include <arch/atomic.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)  { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+/* These should be written in asm but we do it in C for now. */
+
+static inline void atomic_add(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	v->counter += i;
+	cris_atomic_restore(v, flags);
+}
+
+static inline void atomic_sub(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	v->counter -= i;
+	cris_atomic_restore(v, flags);
+}
+
+static inline int atomic_add_return(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	cris_atomic_save(v, flags);
+	retval = (v->counter += i);
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	cris_atomic_save(v, flags);
+	retval = (v->counter -= i);
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+
+static inline int atomic_sub_and_test(int i, volatile atomic_t *v)
+{
+	int retval;
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	retval = (v->counter -= i) == 0;
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+
+static inline void atomic_inc(volatile atomic_t *v)
+{
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	(v->counter)++;
+	cris_atomic_restore(v, flags);
+}
+
+static inline void atomic_dec(volatile atomic_t *v)
+{
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	(v->counter)--;
+	cris_atomic_restore(v, flags);
+}
+
+static inline int atomic_inc_return(volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	cris_atomic_save(v, flags);
+	retval = ++(v->counter);
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+
+static inline int atomic_dec_return(volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	cris_atomic_save(v, flags);
+	retval = --(v->counter);
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+static inline int atomic_dec_and_test(volatile atomic_t *v)
+{
+	int retval;
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	retval = --(v->counter) == 0;
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+
+static inline int atomic_inc_and_test(volatile atomic_t *v)
+{
+	int retval;
+	unsigned long flags;
+	cris_atomic_save(v, flags);
+	retval = ++(v->counter) == 0;
+	cris_atomic_restore(v, flags);
+	return retval;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	cris_atomic_save(v, flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	cris_atomic_restore(v, flags);
+	return ret;
+}
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long flags;
+
+	cris_atomic_save(v, flags);
+	ret = v->counter;
+	if (ret != u)
+		v->counter += a;
+	cris_atomic_restore(v, flags);
+	return ret != u;
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec()     barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc()     barrier()
+
+#include <asm-generic/atomic.h>
+#endif
diff --git a/arch/cris/include/asm/auxvec.h b/arch/cris/include/asm/auxvec.h
new file mode 100644
index 000000000000..cb30b01bf19f
--- /dev/null
+++ b/arch/cris/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMCRIS_AUXVEC_H
+#define __ASMCRIS_AUXVEC_H
+
+#endif
diff --git a/arch/cris/include/asm/axisflashmap.h b/arch/cris/include/asm/axisflashmap.h
new file mode 100644
index 000000000000..015ca5445ddd
--- /dev/null
+++ b/arch/cris/include/asm/axisflashmap.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_AXISFLASHMAP_H
+#define __ASM_AXISFLASHMAP_H
+
+/* Bootblock parameters are stored at 0xc000 and has the FLASH_BOOT_MAGIC 
+ * as start, it ends with 0xFFFFFFFF */
+#define FLASH_BOOT_MAGIC 0xbeefcace
+#define BOOTPARAM_OFFSET 0xc000
+/* apps/bootblocktool is used to read and write the parameters,
+ * and it has nothing to do with the partition table. 
+ */
+
+#define PARTITION_TABLE_OFFSET 10
+#define PARTITION_TABLE_MAGIC 0xbeef	/* Not a good magic */
+
+/* The partitiontable_head is located at offset +10: */
+struct partitiontable_head {
+	__u16 magic;	/* PARTITION_TABLE_MAGIC */
+	__u16 size;	/* Length of ptable block (entries + end marker) */
+	__u32 checksum;	/* simple longword sum, over entries + end marker  */
+};
+
+/* And followed by partition table entries */
+struct partitiontable_entry {
+	__u32 offset;		/* relative to the sector the ptable is in */
+	__u32 size;		/* in bytes */
+	__u32 checksum;		/* simple longword sum */
+	__u16 type;		/* see type codes below */
+	__u16 flags;		/* bit 0: ro/rw = 1/0 */
+	__u32 future0;		/* 16 bytes reserved for future use */
+	__u32 future1;
+	__u32 future2;
+	__u32 future3;
+};
+/* ended by an end marker: */
+#define PARTITIONTABLE_END_MARKER 0xFFFFFFFF
+#define PARTITIONTABLE_END_MARKER_SIZE 4
+
+#define PARTITIONTABLE_END_PAD	10
+
+/* Complete structure for whole partition table */
+/* note that table may end before CONFIG_ETRAX_PTABLE_ENTRIES by setting
+ * offset of the last entry + 1 to PARTITIONTABLE_END_MARKER.
+ */
+struct partitiontable {
+	__u8 skip[PARTITION_TABLE_OFFSET];
+	struct partitiontable_head head;
+	struct partitiontable_entry entries[];
+};
+
+#define PARTITION_TYPE_PARAM  0x0001
+#define PARTITION_TYPE_KERNEL 0x0002
+#define PARTITION_TYPE_JFFS   0x0003
+#define PARTITION_TYPE_JFFS2  0x0000
+
+#define	PARTITION_FLAGS_READONLY_MASK	0x0001
+#define	PARTITION_FLAGS_READONLY	0x0001
+
+/* The master mtd for the entire flash. */
+extern struct mtd_info *axisflash_mtd;
+
+#endif
diff --git a/arch/cris/include/asm/bitops.h b/arch/cris/include/asm/bitops.h
new file mode 100644
index 000000000000..c0e62f811e09
--- /dev/null
+++ b/arch/cris/include/asm/bitops.h
@@ -0,0 +1,166 @@
+/* asm/bitops.h for Linux/CRIS
+ *
+ * TODO: asm versions if speed is needed
+ *
+ * All bit operations return 0 if the bit was cleared before the
+ * operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#ifndef _CRIS_BITOPS_H
+#define _CRIS_BITOPS_H
+
+/* Currently this is unsuitable for consumption outside the kernel.  */
+#ifdef __KERNEL__ 
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <arch/bitops.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <linux/compiler.h>
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+
+#define set_bit(nr, addr)    (void)test_and_set_bit(nr, addr)
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+
+#define clear_bit(nr, addr)  (void)test_and_clear_bit(nr, addr)
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+
+#define change_bit(nr, addr) (void)test_and_change_bit(nr, addr)
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned int mask, retval;
+	unsigned long flags;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	cris_atomic_save(addr, flags);
+	retval = (mask & *adr) != 0;
+	*adr |= mask;
+	cris_atomic_restore(addr, flags);
+	return retval;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned int mask, retval;
+	unsigned long flags;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	cris_atomic_save(addr, flags);
+	retval = (mask & *adr) != 0;
+	*adr &= ~mask;
+	cris_atomic_restore(addr, flags);
+	return retval;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned int mask, retval;
+	unsigned long flags;
+	unsigned int *adr = (unsigned int *)addr;
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	cris_atomic_save(addr, flags);
+	retval = (mask & *adr) != 0;
+	*adr ^= mask;
+	cris_atomic_restore(addr, flags);
+	return retval;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * Since we define it "external", it collides with the built-in
+ * definition, which doesn't have the same semantics.  We don't want to