arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 2199 deletions

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
deleted file mode 100644
index 3cdd4835a9f7..000000000000
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ /dev/null
@@ -1,2199 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/pinctrl-adi2.h>
-#include <linux/gpio.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/dma.h>
-#include <asm/nand.h>
-#include <asm/dpmc.h>
-#include <asm/bfin_sport.h>
-#include <asm/portmux.h>
-#include <asm/bfin_sdh.h>
-#include <mach/bf54x_keys.h>
-#include <linux/input.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF548-EZKIT";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x2C0C0000,
-		.end    = 0x2C0C0000 + 0xfffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PG7,
-		.end    = IRQ_PG7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
-
-#include <mach/bf54x-lq043.h>
-
-static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
-	.width =	95,
-	.height =	54,
-	.xres =		{480, 480, 480},
-	.yres =		{272, 272, 272},
-	.bpp =		{24, 24, 24},
-	.disp =		GPIO_PE3,
-};
-
-static struct resource bf54x_lq043_resources[] = {
-	{
-		.start = IRQ_EPPI0_ERR,
-		.end = IRQ_EPPI0_ERR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf54x_lq043_device = {
-	.name		= "bf54x-lq043",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bf54x_lq043_resources),
-	.resource 	= bf54x_lq043_resources,
-	.dev		= {
-		.platform_data = &bf54x_lq043_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
-static const unsigned int bf548_keymap[] = {
-	KEYVAL(0, 0, KEY_ENTER),
-	KEYVAL(0, 1, KEY_HELP),
-	KEYVAL(0, 2, KEY_0),
-	KEYVAL(0, 3, KEY_BACKSPACE),
-	KEYVAL(1, 0, KEY_TAB),
-	KEYVAL(1, 1, KEY_9),
-	KEYVAL(1, 2, KEY_8),
-	KEYVAL(1, 3, KEY_7),
-	KEYVAL(2, 0, KEY_DOWN),
-	KEYVAL(2, 1, KEY_6),
-	KEYVAL(2, 2, KEY_5),
-	KEYVAL(2, 3, KEY_4),
-	KEYVAL(3, 0, KEY_UP),
-	KEYVAL(3, 1, KEY_3),
-	KEYVAL(3, 2, KEY_2),
-	KEYVAL(3, 3, KEY_1),
-};
-
-static struct bfin_kpad_platform_data bf54x_kpad_data = {
-	.rows			= 4,
-	.cols			= 4,
-	.keymap			= bf548_keymap,
-	.keymapsize		= ARRAY_SIZE(bf548_keymap),
-	.repeat			= 0,
-	.debounce_time		= 5000,	/* ns (5ms) */
-	.coldrive_time		= 1000, /* ns (1ms) */
-	.keyup_test_interval	= 50, /* ms (50ms) */
-};
-
-static struct resource bf54x_kpad_resources[] = {
-	{
-		.start = IRQ_KEY,
-		.end = IRQ_KEY,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf54x_kpad_device = {
-	.name		= "bf54x-keys",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bf54x_kpad_resources),
-	.resource 	= bf54x_kpad_resources,
-	.dev		= {
-		.platform_data = &bf54x_kpad_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <linux/platform_data/bfin_rotary.h>
-
-static struct bfin_rotary_platform_data bfin_rotary_data = {
-	/*.rotary_up_key     = KEY_UP,*/
-	/*.rotary_down_key   = KEY_DOWN,*/
-	.rotary_rel_code   = REL_WHEEL,
-	.rotary_button_key = KEY_ENTER,
-	.debounce	   = 10,	/* 0..17 */
-	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
-	.pm_wakeup	   = 1,
-};
-
-static struct resource bfin_rotary_resources[] = {
-	{
-		.start = CNT_CONFIG,
-		.end   = CNT_CONFIG + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CNT,
-		.end = IRQ_CNT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_rotary_device = {
-	.name		= "bfin-rotary",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
-	.resource 	= bfin_rotary_resources,
-	.dev		= {
-		.platform_data = &bfin_rotary_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
-#include <linux/input/adxl34x.h>
-static const struct adxl34x_platform_data adxl34x_info = {
-	.x_axis_offset = 0,
-	.y_axis_offset = 0,
-	.z_axis_offset = 0,
-	.tap_threshold = 0x31,
-	.tap_duration = 0x10,
-	.tap_latency = 0x60,
-	.tap_window = 0xF0,
-	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
-	.act_axis_control = 0xFF,
-	.activity_threshold = 5,
-	.inactivity_threshold = 3,
-	.inactivity_time = 4,
-	.free_fall_threshold = 0x7,
-	.free_fall_time = 0x20,
-	.data_rate = 0x8,
-	.data_range = ADXL_FULL_RES,
-
-	.ev_type = EV_ABS,
-	.ev_code_x = ABS_X,		/* EV_REL */
-	.ev_code_y = ABS_Y,		/* EV_REL */
-	.ev_code_z = ABS_Z,		/* EV_REL */
-
-	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
-
-/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
-/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
-	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
-	.fifo_mode = ADXL_FIFO_STREAM,
-	.orientation_enable = ADXL_EN_ORIENTATION_3D,
-	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
-	.divisor_length = ADXL_LP_FILTER_DIVISOR_16,
-	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
-	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_DLL,
-		.end = UART0_RBR+2,
-		.flags = IORESOURCE_MEM,
-	},
-#ifdef CONFIG_EARLY_PRINTK
-	{
-		.start = PORTE_FER,
-		.end = PORTE_FER+2,
-		.flags = IORESOURCE_REG,
-	},
-#endif
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_DLL,
-		.end = UART1_RBR+2,
-		.flags = IORESOURCE_MEM,
-	},
-#ifdef CONFIG_EARLY_PRINTK
-	{
-		.start = PORTH_FER,
-		.end = PORTH_FER+2,
-		.flags = IORESOURCE_REG,
-	},
-#endif
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin -- 0 means not supported */
-		.start = GPIO_PE10,
-		.end = GPIO_PE10,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin -- 0 means not supported */
-		.start = GPIO_PE9,
-		.end = GPIO_PE9,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX,
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	P_UART1_RTS, P_UART1_CTS,
-#endif
-	0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-static struct resource bfin_uart2_resources[] = {
-	{
-		.start = UART2_DLL,
-		.end = UART2_RBR+2,
-		.flags = IORESOURCE_MEM,
-	},
-#ifdef CONFIG_EARLY_PRINTK
-	{
-		.start = PORTB_FER,
-		.end = PORTB_FER+2,
-		.flags = IORESOURCE_REG,
-	},
-#endif
-	{
-		.start = IRQ_UART2_TX,
-		.end = IRQ_UART2_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART2_ERROR,
-		.end = IRQ_UART2_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART2_TX,
-		.end = CH_UART2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART2_RX,
-		.end = CH_UART2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart2_peripherals[] = {
-	P_UART2_TX, P_UART2_RX, 0
-};
-
-static struct platform_device bfin_uart2_device = {
-	.name = "bfin-uart",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
-	.resource = bfin_uart2_resources,
-	.dev = {
-		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART3
-static struct resource bfin_uart3_resources[] = {
-	{
-		.start = UART3_DLL,
-		.end = UART3_RBR+2,
-		.flags = IORESOURCE_MEM,
-	},
-#ifdef CONFIG_EARLY_PRINTK
-	{
-		.start = PORTB_FER,
-		.end = PORTB_FER+2,
-		.flags = IORESOURCE_REG,
-	},
-#endif
-	{
-		.start = IRQ_UART3_TX,
-		.end = IRQ_UART3_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART3_ERROR,
-		.end = IRQ_UART3_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART3_TX,
-		.end = CH_UART3_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART3_RX,
-		.end = CH_UART3_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART3_CTSRTS
-	{	/* CTS pin -- 0 means not supported */
-		.start = GPIO_PB3,
-		.end = GPIO_PB3,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin -- 0 means not supported */
-		.start = GPIO_PB2,
-		.end = GPIO_PB2,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart3_peripherals[] = {
-	P_UART3_TX, P_UART3_RX,
-#ifdef CONFIG_BFIN_UART3_CTSRTS
-	P_UART3_RTS, P_UART3_CTS,
-#endif
-	0
-};
-
-static struct platform_device bfin_uart3_device = {
-	.name = "bfin-uart",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
-	.resource = bfin_uart3_resources,
-	.dev = {
-		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR2
-static struct resource bfin_sir2_resources[] = {
-	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART2_RX,
-		.end = CH_UART2_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir2_device = {
-	.name = "bfin_sir",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
-	.resource = bfin_sir2_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR3
-static struct resource bfin_sir3_resources[] = {
-	{
-		.start = 0xFFC03100,
-		.end = 0xFFC031FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART3_RX,
-		.end = CH_UART3_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir3_device = {
-	.name = "bfin_sir",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(bfin_sir3_resources),
-	.resource = bfin_sir3_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SMSC911X)
-#include <linux/smsc911x.h>
-
-static struct resource smsc911x_resources[] = {
-	{
-		.name = "smsc911x-memory",
-		.start = 0x24000000,
-		.end = 0x24000000 + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PE8,
-		.end = IRQ_PE8,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.flags = SMSC911X_USE_32BIT,
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
-	.name = "smsc911x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smsc911x_resources),
-	.resource = smsc911x_resources,
-	.dev = {
-		.platform_data = &smsc911x_config,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xFFC03C00,
-		.end	= 0xFFC040FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "mc"
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "dma"
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	.gpio_vrsel	= GPIO_PE7,
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-	.clkin          = 24,           /* musb CLKIN in MHZ */
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-static struct resource bfin_sport2_uart_resources[] = {
-	{
-		.start = SPORT2_TCR1,
-		.end = SPORT2_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT2_RX,
-		.end = IRQ_SPORT2_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT2_ERROR,
-		.end = IRQ_SPORT2_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport2_peripherals[] = {
-	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
-	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
-};
-
-static struct platform_device bfin_sport2_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
-	.resource = bfin_sport2_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-static struct resource bfin_sport3_uart_resources[] = {
-	{
-		.start = SPORT3_TCR1,
-		.end = SPORT3_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT3_RX,
-		.end = IRQ_SPORT3_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT3_ERROR,
-		.end = IRQ_SPORT3_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport3_peripherals[] = {
-	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
-	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
-};
-
-static struct platform_device bfin_sport3_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
-	.resource = bfin_sport3_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_CAN_BFIN)
-
-static unsigned short bfin_can0_peripherals[] = {
-	P_CAN0_RX, P_CAN0_TX, 0
-};
-
-static struct resource bfin_can0_resources[] = {
-	{
-		.start = 0xFFC02A00,
-		.end = 0xFFC02FFF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CAN0_RX,
-		.end = IRQ_CAN0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN0_TX,
-		.end = IRQ_CAN0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN0_ERROR,
-		.end = IRQ_CAN0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_can0_device = {
-	.name = "bfin_can",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_can0_resources),
-	.resource = bfin_can0_resources,
-	.dev = {
-		.platform_data = &bfin_can0_peripherals, /* Passed to driver */
-	},
-};
-
-static unsigned short bfin_can1_peripherals[] = {
-	P_CAN1_RX, P_CAN1_TX, 0
-};
-
-static struct resource bfin_can1_resources[] = {
-	{
-		.start = 0xFFC03200,
-		.end = 0xFFC037FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CAN1_RX,
-		.end = IRQ_CAN1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN1_TX,
-		.end = IRQ_CAN1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN1_ERROR,
-		.end = IRQ_CAN1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_can1_device = {
-	.name = "bfin_can",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_can1_resources),
-	.resource = bfin_can1_resources,
-	.dev = {
-		.platform_data = &bfin_can1_peripherals, /* Passed to driver */
-	},
-};
-
-#endif
-
-#if IS_ENABLED(CONFIG_PATA_BF54X)
-static struct resource bfin_atapi_resources[] = {
-	{
-		.start = 0xFFC03800,
-		.end = 0xFFC0386F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_ATAPI_ERR,
-		.end = IRQ_ATAPI_ERR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_atapi_device = {
-	.name = "pata-bf54x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_atapi_resources),
-	.resource = bfin_atapi_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-static struct mtd_partition partition_info[] = {
-	{
-		.name = "bootloader(nand)",
-		.offset = 0,
-		.size = 0x80000,
-	}, {
-		.name = "linux kernel(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = 4 * 1024 * 1024,
-	},
-	{
-		.name = "file system(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.data_width = NFC_NWIDTH_8,
-	.partitions = partition_info,
-	.nr_partitions = ARRAY_SIZE(partition_info),
-	.rd_dly = 3,
-	.wr_dly = 3,
-};
-
-static struct resource bf5xx_nand_resources[] = {
-	{
-		.start = 0xFFC03B00,
-		.end = 0xFFC03B4F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = CH_NFC,
-		.end = CH_NFC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf5xx_nand_device = {
-	.name = "bf5xx-nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
-	.resource = bf5xx_nand_resources,
-	.dev = {
-		.platform_data = &bf5xx_nand_platform,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SDH_BFIN)
-
-static struct bfin_sd_host bfin_sdh_data = {
-	.dma_chan = CH_SDH,
-	.irq_int0 = IRQ_SDH_MASK0,
-	.pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
-};
-
-static struct platform_device bf54x_sdh_device = {
-	.name = "bfin-sdh",
-	.id = 0,
-	.dev = {
-		.platform_data = &bfin_sdh_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x80000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x400000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = 0x1000000 - 0x80000 - 0x400000 - 0x8000 * 4,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "config(nor)",
-		.size       = 0x8000 * 3,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "u-boot env(nor)",
-		.size       = 0x8000,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x21ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-/* SPI flash chip (m25p16) */
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00080000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-#ifdef CONFIG_PINCTRL_ADI2
-
-# define ADI_PINT_DEVNAME "adi-gpio-pint"
-# define ADI_GPIO_DEVNAME "adi-gpio"
-# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
-
-static struct platform_device bfin_pinctrl_device = {
-	.name = ADI_PINCTRL_DEVNAME,
-	.id = 0,
-};
-
-static struct resource bfin_pint0_resources[] = {
-	{
-		.start = PINT0_MASK_SET,
-		.end = PINT0_LATCH + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PINT0,
-		.end = IRQ_PINT0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pint0_device = {
-	.name = ADI_PINT_DEVNAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_pint0_resources),
-	.resource = bfin_pint0_resources,
-};
-
-static struct resource bfin_pint1_resources[] = {
-	{
-		.start = PINT1_MASK_SET,
-		.end = PINT1_LATCH + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PINT1,
-		.end = IRQ_PINT1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pint1_device = {
-	.name = ADI_PINT_DEVNAME,
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_pint1_resources),
-	.resource = bfin_pint1_resources,
-};
-
-static struct resource bfin_pint2_resources[] = {
-	{
-		.start = PINT2_MASK_SET,
-		.end = PINT2_LATCH + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PINT2,
-		.end = IRQ_PINT2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pint2_device = {
-	.name = ADI_PINT_DEVNAME,
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_pint2_resources),
-	.resource = bfin_pint2_resources,
-};
-
-static struct resource bfin_pint3_resources[] = {
-	{
-		.start = PINT3_MASK_SET,
-		.end = PINT3_LATCH + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PINT3,
-		.end = IRQ_PINT3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pint3_device = {
-	.name = ADI_PINT_DEVNAME,
-	.id = 3,
-	.num_resources = ARRAY_SIZE(bfin_pint3_resources),
-	.resource = bfin_pint3_resources,
-};
-
-static struct resource bfin_gpa_resources[] = {
-	{
-		.start = PORTA_FER,
-		.end = PORTA_MUX + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{	/* optional */
-		.start = IRQ_PA0,
-		.end = IRQ_PA0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
-	.port_gpio_base	= GPIO_PA0,	/* Optional */
-	.port_pin_base	= GPIO_PA0,
-	.port_width	= GPIO_BANKSIZE,
-	.pint_id	= 0,		/* PINT0 */
-	.pint_assign	= true,		/* PINT upper 16 bit */
-	.pint_map	= 0,		/* mapping mask in PINT */
-};
-
-static struct platform_device bfin_gpa_device = {
-	.name = ADI_GPIO_DEVNAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_gpa_resources),
-	.resource = bfin_gpa_resources,
-	.dev = {
-		.platform_data = &bfin_gpa_pdata, /* Passed to driver */
-	},
-};
-
-static struct resource bfin_gpb_resources[] = {
-	{
-		.start = PORTB_FER,
-		.end = PORTB_MUX + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PB0,
-		.end = IRQ_PB0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
-	.port_gpio_base	= GPIO_PB0,
-	.port_pin_base	= GPIO_PB0,
-	.port_width	= 15,
-	.pint_id	= 0,
-	.pint_assign	= true,
-	.pint_map	= 1,
-};
-
-static struct platform_device bfin_gpb_device = {
-	.name = ADI_GPIO_DEVNAME,
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_gpb_resources),
-	.resource = bfin_gpb_resources,
-	.dev = {
-		.platform_data = &bfin_gpb_pdata, /* Passed to driver */
-	},
-};
-
-static struct resource bfin_gpc_resources[] = {
-	{
-		.start = PORTC_FER,
-		.end = PORTC_MUX + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_PC0,
-		.end = IRQ_PC0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
-	.port_gpio_base	= GPIO_PC0,
-	.port_pin_base	= GPIO_PC0,
-	.port_width	= 14,
-	.pint_id	= 2,
-	.pint_assign	= true,
-	.pint_map	= 0,
-};
-
-static struct platform_device bfin_gpc_device = {
-	.name = ADI_GPIO_DEVNAME,
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_gpc_resources),
-	.resource = bfin_gpc_resources,
-	.dev = {
-		.platform_data = &bfin_gpc_pdata, /* Passed to driver */
-	},
-};
-
-static struct resource bfin_gpd_resources[] = {
-	{
-		.start = PO