Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6

* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
  IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.
  IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files.
  IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.
  IXP4xx: Remove unused Motorola PrPMC1100 platform macros.
  IXP4xx: move FSG platform macros to the platform code.
  IXP4xx: move DSM G600 platform macros to the platform code.
  IXP4xx: move NAS100D platform macros to the platform code.
  IXP4xx: move NSLU2 platform macros to the platform code.
  IXP4xx: move Coyote platform macros to the platform code.
  IXP4xx: move AVILA platform macros to the platform code.
  IXP4xx: move IXDP425 platform macros to the platform code.
  IXP4xx: Extend PCI MMIO indirect address space to 1 GB.
  IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI.
  IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity.
  IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*.
  IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request().
  ARM: fix insl() and outsl() endianness on IXP4xx architecture.
  IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c.
  IXP4xx: change the timer base frequency to 66.666000 MHz.

36 files changed, 453 insertions, 910 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 264f4d59f898..9e5070da17ae 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,21 +179,21 @@ config IXP4XX_INDIRECT_PCI
 	help
           IXP4xx provides two methods of accessing PCI memory space:
 
-          1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
              To access PCI via this space, we simply ioremap() the BAR
              into the kernel and we can use the standard read[bwl]/write[bwl]
              macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be 
+             limits the system to just 64MB of PCI memory. This can be
              problematic if using video cards and other memory-heavy devices.
-          
-          2) If > 64MB of memory space is required, the IXP4xx can be 
-	     configured to use indirect registers to access PCI This allows 
-	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantage of this is that every PCI access requires 
-	     three local register accesses plus a spinlock, but in some 
-	     cases the performance hit is acceptable. In addition, you cannot 
-	     mmap() PCI devices in this case due to the indirect nature
-	     of the PCI window.
+
+	  2) If > 64MB of memory space is required, the IXP4xx can be
+	     configured to use indirect registers to access the whole PCI
+	     memory space. This currently allows for up to 1 GB (0x10000000
+	     to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
+	     is that every PCI access requires three local register accesses
+	     plus a spinlock, but in some cases the performance hit is
+	     acceptable. In addition, you cannot mmap() PCI devices in this
+	     case due to the indirect nature of the PCI window.
 
 	  By default, the direct method is used. Choose this option if you
 	  need to use the indirect method instead. If you don't know
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 08d65dcdb5fe..845e1b500548 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -22,40 +22,45 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
-
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#define AVILA_MAX_DEV	4
+#define LOFT_MAX_DEV	6
+#define IRQ_LINES	4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
-		IRQ_AVILA_PCI_INTA,
-		IRQ_AVILA_PCI_INTB,
-		IRQ_AVILA_PCI_INTC,
-		IRQ_AVILA_PCI_INTD
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTD)
 	};
 
-	int irq = -1;
-
 	if (slot >= 1 &&
-	slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
-		pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
-		irq = pci_irq_table[(slot + pin - 2) % 4];
-	}
+	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
+	    pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % 4];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci avila_pci __initdata = {
@@ -75,4 +80,3 @@ int __init avila_pci_init(void)
 }
 
 subsys_initcall(avila_pci_init);
-
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 797995ce18b9..6e558a76457d 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -19,7 +19,6 @@
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
 #include <linux/i2c-gpio.h>
-
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -29,6 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#define AVILA_SDA_PIN	7
+#define AVILA_SCL_PIN	6
+
 static struct flash_platform_data avila_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 70afcfe5b881..c4a01594c761 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -481,11 +481,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 
 	res[1].name = "PCI Memory Space";
 	res[1].start = PCIBIOS_MIN_MEM;
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-	res[1].end = 0x4bffffff;
-#else
-	res[1].end = 0x4fffffff;
-#endif
+	res[1].end = PCIBIOS_MAX_MEM;
 	res[1].flags = IORESOURCE_MEM;
 
 	request_resource(&ioport_resource, &res[0]);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index cfd52fb341cb..3bbf40f6d964 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -117,7 +117,7 @@ int gpio_to_irq(int gpio)
 }
 EXPORT_SYMBOL(gpio_to_irq);
 
-int irq_to_gpio(int irq)
+int irq_to_gpio(unsigned int irq)
 {
 	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
 
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index efddf01ed17b..b978ea8bd6f0 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -18,27 +18,31 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-
 #include <asm/mach/pci.h>
 
+#define SLOT0_DEVID	14
+#define SLOT1_DEVID	15
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define SLOT0_INTA	6
+#define SLOT1_INTA	11
+
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	if (slot == COYOTE_PCI_SLOT0_DEVID)
-		return IRQ_COYOTE_PCI_SLOT0;
-	else if (slot == COYOTE_PCI_SLOT1_DEVID)
-		return IRQ_COYOTE_PCI_SLOT1;
+	if (slot == SLOT0_DEVID)
+		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
+	else if (slot == SLOT1_DEVID)
+		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
 	else return -1;
 }
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index aab1954e2747..25bf5ad770ea 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -25,6 +25,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define COYOTE_IDE_REGION_SIZE	0x1000
+
+#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
 static struct flash_platform_data coyote_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 926d15f885fb..fa70fed462ba 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -19,39 +19,45 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		4
+#define IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+#define INTE		7
+#define INTF		6
+
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
-	{
-		{ IRQ_DSMG600_PCI_INTE, -1, -1 },
-		{ IRQ_DSMG600_PCI_INTA, -1, -1 },
-		{ IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
-		{ IRQ_DSMG600_PCI_INTF, -1, -1 },
+	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
+		{ IXP4XX_GPIO_IRQ(INTE), -1, -1 },
+		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
+		{ IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC),
+		  IXP4XX_GPIO_IRQ(INTD) },
+		{ IXP4XX_GPIO_IRQ(INTF), -1, -1 },
 	};
 
-	int irq = -1;
-
-	if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
-		pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
-		irq = pci_irq_table[slot-1][pin-1];
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[slot - 1][pin - 1];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci __initdata dsmg600_pci = {
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index a51bfa6978b6..7c1fa54a6145 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -33,6 +33,23 @@
 #include <asm/mach/time.h>
 #include <asm/gpio.h>
 
+#define DSMG600_SDA_PIN		5
+#define DSMG600_SCL_PIN		4
+
+/* DSM-G600 Timer Setting */
+#define DSMG600_FREQ		66000000
+
+/* Buttons */
+#define DSMG600_PB_GPIO		15	/* power button */
+#define DSMG600_RB_GPIO		3	/* reset button */
+
+/* Power control */
+#define DSMG600_PO_GPIO		2	/* power off */
+
+/* LEDs */
+#define DSMG600_LED_PWR_GPIO	0
+#define DSMG600_LED_WLAN_GPIO	14
+
 static struct flash_platform_data dsmg600_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index ca12a9ca0830..5a810c930624 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -19,33 +19,38 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		3
+#define IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA	6
+#define INTB	7
+#define INTC	5
+
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
-		IRQ_FSG_PCI_INTC,
-		IRQ_FSG_PCI_INTB,
-		IRQ_FSG_PCI_INTA,
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTA),
 	};
 
 	int irq = -1;
-	slot = slot - 11;
+	slot -= 11;
 
-	if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
-	    pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
-		irq = pci_irq_table[(slot - 1)];
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		irq = pci_irq_table[slot - 1];
 	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
 	       __func__, slot, pin, irq);
 
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 5add22fc9899..e7f4befba422 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -24,12 +24,18 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/gpio.h>
 
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+#define FSG_SB_GPIO		4	/* sync button */
+#define FSG_RB_GPIO		9	/* reset button */
+#define FSG_UB_GPIO		10	/* usb button */
+
 static struct flash_platform_data fsg_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index a733b8ff3cec..1c28048209c1 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -17,29 +17,28 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/pci.h>
 
-#define xgpio_irq(n)		(IRQ_IXP4XX_GPIO ## n)
-#define gpio_irq(n)		xgpio_irq(n)
-
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
 #define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
 #define SLOT_NEC		0x0E	/* IDSEL = AD18 */
 
-#define IRQ_ETHA		IRQ_IXP4XX_GPIO4
-#define IRQ_ETHB		IRQ_IXP4XX_GPIO5
-#define IRQ_NEC			IRQ_IXP4XX_GPIO3
-#define IRQ_MPCI		IRQ_IXP4XX_GPIO12
-
 /* GPIO lines */
 #define GPIO_SCL		0
 #define GPIO_SDA		1
 #define GPIO_STR		2
+#define GPIO_IRQ_NEC		3
+#define GPIO_IRQ_ETHA		4
+#define GPIO_IRQ_ETHB		5
 #define GPIO_HSS0_DCD_N		6
 #define GPIO_HSS1_DCD_N		7
+#define GPIO_UART0_DCD		8
+#define GPIO_UART1_DCD		9
 #define GPIO_HSS0_CTS_N		10
 #define GPIO_HSS1_CTS_N		11
+#define GPIO_IRQ_MPCI		12
 #define GPIO_HSS1_RTS_N		13
 #define GPIO_HSS0_RTS_N		14
+/* GPIO15 is not connected */
 
 /* Control outputs from 74HC4094 */
 #define CONTROL_HSS0_CLK_INT	0
@@ -152,7 +151,7 @@ static int hss_set_clock(int port, unsigned int clock_type)
 
 static irqreturn_t hss_dcd_irq(int irq, void *pdev)
 {
-	int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+	int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
 	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
 	set_carrier_cb_tab[port](pdev, !i);
 	return IRQ_HANDLED;
@@ -165,9 +164,9 @@ static int hss_open(int port, void *pdev,
 	int i, irq;
 
 	if (!port)
-		irq = gpio_irq(GPIO_HSS0_DCD_N);
+		irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
 	else
-		irq = gpio_irq(GPIO_HSS1_DCD_N);
+		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
 
 	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
 	set_carrier_cb(pdev, !i);
@@ -188,8 +187,8 @@ static int hss_open(int port, void *pdev,
 
 static void hss_close(int port, void *pdev)
 {
-	free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
-		 pdev);
+	free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
+		 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
 	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
@@ -421,8 +420,8 @@ static void __init gmlr_init(void)
 	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
 	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
 	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
-	set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
-	set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
 
 	set_control(CONTROL_HSS0_DTR_N, 1);
 	set_control(CONTROL_HSS1_DTR_N, 1);
@@ -442,10 +441,10 @@ static void __init gmlr_init(void)
 #ifdef CONFIG_PCI
 static void __init gmlr_pci_preinit(void)
 {
-	set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
@@ -466,10 +465,10 @@ static void __init gmlr_pci_postinit(void)
 static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch(slot) {
-	case SLOT_ETHA:	return IRQ_ETHA;
-	case SLOT_ETHB:	return IRQ_ETHB;
-	case SLOT_NEC:	return IRQ_NEC;
-	default:	return IRQ_MPCI;
+	case SLOT_ETHA:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
+	case SLOT_ETHB:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
+	case SLOT_NEC:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
+	default:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
 	}
 }
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 7b8a2c323840..25d2c333c204 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -26,14 +26,16 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
+#define SLOT0_DEVID	0
+#define SLOT1_DEVID	1
+#define INTA		10 /* slot 1 has INTA and INTB crossed */
+#define INTB		11
+
 /*
- * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
  * Slot 0 isn't actually populated with a card connector but
  * we initialize it anyway in case a future version has the
  * slot populated or someone with good soldering skills has
@@ -41,32 +43,26 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 
 static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	int rc;
-	static int gtwx5715_irqmap
-			[GTWX5715_PCI_SLOT_COUNT]
-			[GTWX5715_PCI_INT_PIN_COUNT] = {
-	{GTWX5715_PCI_SLOT0_INTA_IRQ, GTWX5715_PCI_SLOT0_INTB_IRQ},
-	{GTWX5715_PCI_SLOT1_INTA_IRQ, GTWX5715_PCI_SLOT1_INTB_IRQ},
-};
+	int rc = -1;
 
-	if (slot >= GTWX5715_PCI_SLOT_COUNT ||
-			pin >= GTWX5715_PCI_INT_PIN_COUNT) rc = -1;
-	else
-		rc = gtwx5715_irqmap[slot][pin-1];
+	if ((slot == SLOT0_DEVID && pin == 1) ||
+	    (slot == SLOT1_DEVID && pin == 2))
+		rc = IXP4XX_GPIO_IRQ(INTA);
+	else if ((slot == SLOT0_DEVID && pin == 2) ||
+		 (slot == SLOT1_DEVID && pin == 1))
+		rc = IXP4XX_GPIO_IRQ(INTB);
 
-	printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc);
-	return(rc);
+	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
+	       __func__, slot, pin, rc);
+	return rc;
 }
 
 struct hw_pci gtwx5715_pci __initdata = {
@@ -81,9 +77,7 @@ struct hw_pci gtwx5715_pci __initdata = {
 int __init gtwx5715_pci_init(void)
 {
 	if (machine_is_gtwx5715())
-	{
 		pci_common_init(&gtwx5715_pci);
-	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 25c21d6665ec..0bc7185cb6f7 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -28,7 +28,6 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
-
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -37,7 +36,34 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <mach/gtwx5715.h>
+
+/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
+   and operate as an SPI type interface.  The details of the interface
+   are available on Kendin/Micrel's web site. */
+
+#define GTWX5715_KSSPI_SELECT	5
+#define GTWX5715_KSSPI_TXD	6
+#define GTWX5715_KSSPI_CLOCK	7
+#define GTWX5715_KSSPI_RXD	12
+
+/* The "reset" button is wired to GPIO 3.
+   The GPIO is brought "low" when the button is pushed. */
+
+#define GTWX5715_BUTTON_GPIO	3
+
+/* Board Label      Front Label
+   LED1             Power
+   LED2             Wireless-G
+   LED3             not populated but could be
+   LED4             Internet
+   LED5 - LED8      Controlled by KS8995M Switch
+   LED9             DMZ */
+
+#define GTWX5715_LED1_GPIO	2
+#define GTWX5715_LED2_GPIO	9
+#define GTWX5715_LED3_GPIO	8
+#define GTWX5715_LED4_GPIO	1
+#define GTWX5715_LED9_GPIO	4
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
deleted file mode 100644
index 1640cb61972b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/avila.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/avila.h
- *
- * Gateworks Avila platform specific definitions
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp425.h
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define	AVILA_SDA_PIN		7
-#define	AVILA_SCL_PIN		6
-
-/*
- * AVILA PCI IRQs
- */
-#define AVILA_PCI_MAX_DEV	4
-#define LOFT_PCI_MAX_DEV    6
-#define AVILA_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define AVILA_PCI_INTA_PIN	11
-#define AVILA_PCI_INTB_PIN	10
-#define AVILA_PCI_INTC_PIN	9
-#define AVILA_PCI_INTD_PIN	8
-
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
deleted file mode 100644
index 717ac6d16f55..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/coyote.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/coyote.h
- *
- * ADI Engineering platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define	COYOTE_PCI_SLOT0_PIN	6
-#define	COYOTE_PCI_SLOT1_PIN	11
-
-#define	COYOTE_PCI_SLOT0_DEVID	14
-#define	COYOTE_PCI_SLOT1_DEVID	15
-
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define	COYOTE_IDE_REGION_SIZE	0x1000
-
-#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
deleted file mode 100644
index dc087a34a268..000000000000
--- a/