diff options
author | Kevin Hilman <khilman@ti.com> | 2011-05-20 11:53:37 +0200 |
---|---|---|
committer | Kevin Hilman <khilman@ti.com> | 2011-05-27 08:43:34 -0700 |
commit | e5cdb13ff95e1400bc94d3e6610fc5e95be3b5b1 (patch) | |
tree | 0421e5fc4819966c366fd68a6cdfc5f89422c430 /arch/arm | |
parent | 5ee1a81b84ee8b0bd0b4f8cdbac48b472863c1f2 (diff) |
GPIO: OMAP: move to drivers/gpio
Move OMAP GPIO driver to drivers/gpio. Builds whenever
CONFIG_ARCH_OMAP=y.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/plat-omap/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/plat-omap/gpio.c | 2009 |
2 files changed, 1 insertions, 2010 deletions
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index a4a12859fdd5..f0233e6abcdf 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ +obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ usb.o fb.o io.o counter_32k.o obj-m := obj-n := diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c deleted file mode 100644 index 44acabd5f530..000000000000 --- a/arch/arm/plat-omap/gpio.c +++ /dev/null @@ -1,2009 +0,0 @@ -/* - * linux/arch/arm/plat-omap/gpio.c - * - * Support functions for OMAP GPIO - * - * Copyright (C) 2003-2005 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/syscore_ops.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <mach/gpio.h> -#include <asm/mach/irq.h> - -struct gpio_bank { - unsigned long pbase; - void __iomem *base; - u16 irq; - u16 virtual_irq_start; - int method; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - u32 suspend_wakeup; - u32 saved_wakeup; -#endif - u32 non_wakeup_gpios; - u32 enabled_non_wakeup_gpios; - - u32 saved_datain; - u32 saved_fallingdetect; - u32 saved_risingdetect; - u32 level_mask; - u32 toggle_mask; - spinlock_t lock; - struct gpio_chip chip; - struct clk *dbck; - u32 mod_usage; - u32 dbck_enable_mask; - struct device *dev; - bool dbck_flag; - int stride; -}; - -#ifdef CONFIG_ARCH_OMAP3 -struct omap3_gpio_regs { - u32 irqenable1; - u32 irqenable2; - u32 wake_en; - u32 ctrl; - u32 oe; - u32 leveldetect0; - u32 leveldetect1; - u32 risingdetect; - u32 fallingdetect; - u32 dataout; -}; - -static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; -#endif - -/* - * TODO: Cleanup gpio_bank usage as it is having information - * related to all instances of the device - */ -static struct gpio_bank *gpio_bank; - -static int bank_width; - -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -int gpio_bank_count; - -static inline struct gpio_bank *get_gpio_bank(int gpio) -{ - if (cpu_is_omap15xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1]; - } - if (cpu_is_omap16xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 4)]; - } - if (cpu_is_omap7xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 5)]; - } - if (cpu_is_omap24xx()) - return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return &gpio_bank[gpio >> 5]; - BUG(); - return NULL; -} - -static inline int get_gpio_index(int gpio) -{ - if (cpu_is_omap7xx()) - return gpio & 0x1f; - if (cpu_is_omap24xx()) - return gpio & 0x1f; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return gpio & 0x1f; - return gpio & 0x0f; -} - -static inline int gpio_valid(int gpio) -{ - if (gpio < 0) - return -1; - if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { - if (gpio >= OMAP_MAX_GPIO_LINES + 16) - return -1; - return 0; - } - if (cpu_is_omap15xx() && gpio < 16) - return 0; - if ((cpu_is_omap16xx()) && gpio < 64) - return 0; - if (cpu_is_omap7xx() && gpio < 192) - return 0; - if (cpu_is_omap2420() && gpio < 128) - return 0; - if (cpu_is_omap2430() && gpio < 160) - return 0; - if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) - return 0; - return -1; -} - -static int check_gpio(int gpio) -{ - if (unlikely(gpio_valid(gpio) < 0)) { - printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); - dump_stack(); - return -1; - } - return 0; -} - -static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; -#endif - default: - WARN_ON(1); - return; - } - l = __raw_readl(reg); - if (is_input) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - __raw_writel(l, reg); -} - -static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_DATAOUT; - else - reg += OMAP1610_GPIO_CLEAR_DATAOUT; - l = 1 << gpio; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETDATAOUT; - else - reg += OMAP24XX_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_SETDATAOUT; - else - reg += OMAP4_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static int _get_gpio_datain(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAIN; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_INPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAIN; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAIN; - break; -#endif - default: - return -EINVAL; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; -} - -static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAOUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAOUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAOUT; - break; -#endif - default: - return -EINVAL; - } - - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; -} - -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) - -/** - * _set_gpio_debounce - low level gpio debounce time - * @bank: the gpio bank we're acting upon - * @gpio: the gpio number on this @gpio - * @debounce: debounce time to use - * - * OMAP's debounce time is in 31us steps so we need - * to convert and round up to the closest unit. - */ -static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, - unsigned debounce) -{ - void __iomem *reg = bank->base; - u32 val; - u32 l; - - if (!bank->dbck_flag) - return; - - if (debounce < 32) - debounce = 0x01; - else if (debounce > 7936) - debounce = 0xff; - else - debounce = (debounce / 0x1f) - 1; - - l = 1 << get_gpio_index(gpio); - - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(debounce, reg); - - reg = bank->base; - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCENABLE; - else - reg += OMAP24XX_GPIO_DEBOUNCE_EN; - - val = __raw_readl(reg); - - if (debounce) { - val |= l; - clk_enable(bank->dbck); - } else { - val &= ~l; - clk_disable(bank->dbck); - } - bank->dbck_enable_mask = val; - - __raw_writel(val, reg); -} - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, - int trigger) -{ - void __iomem *base = bank->base; - u32 gpio_bit = 1 << gpio; - u32 val; - - if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } - if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (cpu_is_omap44xx()) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base+ - OMAP4_GPIO_IRQWAKEN0); - else { - val = __raw_readl(bank->base + - OMAP4_GPIO_IRQWAKEN0); - __raw_writel(val & (~(1 << gpio)), bank->base + - OMAP4_GPIO_IRQWAKEN0); - } - } else { - /* - * GPIO wakeup request can only be generated on edge - * transitions - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_CLEARWKUENA); - } - } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { - /* - * Log the edge gpio and manually trigger the IRQ - * after resume if the input level changes - * to avoid irq lost during PER RET/OFF mode - * Applies for omap2 non-wakeup gpio and all omap3 gpios - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - bank->enabled_non_wakeup_gpios |= gpio_bit; - else - bank->enabled_non_wakeup_gpios &= ~gpio_bit; - } - - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } -} -#endif - -#ifdef CONFIG_ARCH_OMAP1 -/* - * This only applies to chips that can't do both rising and falling edge - * detection at once. For all other chips, this function is a noop. - */ -static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - break; -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - break; -#endif - default: - return; - } - - l = __raw_readl(reg); - if ((l >> gpio) & 1) - l &= ~(1 << gpio); - else - l |= 1 << gpio; - - __raw_writel(l, reg); -} -#endif - -static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - gpio &= 0x07; - l = __raw_readl(reg); - l &= ~(3 << (gpio << 1)); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 2 << (gpio << 1); - if (trigger & IRQ_TYPE_EDGE_FALLING) - l |= 1 << (gpio << 1); - if (trigger) - /* Enable wake-up during idle for dynamic tick */ - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); - else - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - set_24xx_gpio_triggering(bank, gpio, trigger); - return 0; -#endif - default: - goto bad; - } - __raw_writel(l, reg); - return 0; -bad: - return -EINVAL; -} - -static int gpio_irq_type(struct irq_data *d, unsigned type) -{ - struct gpio_bank *bank; - unsigned gpio; - int retval; - unsigned long flags; - - if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) - gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - else - gpio = d->irq - IH_GPIO_BASE; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - if (type & ~IRQ_TYPE_SENSE_MASK) - return -EINVAL; - - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) - return -EINVAL; - - bank = irq_data_get_irq_chip_data(d); - spin_lock_irqsave(&bank->lock, flags); - retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); - spin_unlock_irqrestore(&bank->lock, flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return retval; -} - -static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - /* MPUIO irqstatus is reset by reading the status register, - * so do nothing here */ - return; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_STATUS; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUS0; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(gpio_mask, reg); - - /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - else if (cpu_is_omap44xx()) - reg = bank->base + OMAP4_GPIO_IRQSTATUS1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - __raw_writel(gpio_mask, reg); - - /* Flush posted write for the irq status to avoid spurious interrupts */ - __raw_readl(reg); - } -} - -static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) -{ - _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); -} - -static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) -{ - void __iomem *reg = bank->base; - int inv = 0; - u32 l; - u32 mask; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQENABLE1; - mask = 0xffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQENABLE1; - mask = 0xffffffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUSSET0; - mask = 0xffffffff; - break; -#endif - default: - WARN_ON(1); - return 0; - } - - l = __raw_readl(reg); - if (inv) - l = ~l; - l &= mask; - return l; -} - -static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_IRQENABLE1; - else - reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; - l = gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETIRQENABLE1; - else - reg += OMAP24XX_GPIO_CLEARIRQENABLE1; - l = gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_IRQSTATUSSET0; - else - reg += OMAP4_GPIO_IRQSTATUSCLR0; - l = gpio_mask; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) -{ - _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); -} - -/* - * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. - * 1510 does not seem to have a wake-up register. If JTAG is connected - * to the target, system will wake up always on GPIO events. While - * system is running all registered GPIO interrupts need to have wake-up - * enabled. When system is suspended, only selected GPIO interrupts need - * to have wake-up enabled. - */ -static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) -{ - unsigned long uninitialized_var(flags); - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_MPUIO: - case METHOD_GPIO_1610: - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - if (bank->non_wakeup_gpios & (1 << gpio)) { - printk(KERN_ERR "Unable to modify wakeup on " - "non-wakeup GPIO%d\n", - (bank - gpio_bank) * 32 + gpio); - return -EINVAL; - } - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif - default: - printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", - bank->method); - return -EINVAL; - } -} - -static void _reset_gpio(struct gpio_bank *bank, int gpio) -{ - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -static int gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank; - int retval; - - if (check_gpio(gpio) < 0) - return -ENODEV; - bank = irq_data_get_irq_chip_data(d); - retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); - - return retval; -} - -static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - - /* Set trigger to none. You need to enable the desired trigger with - * request_irq() or set_irq_type(). - */ - _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); - -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { - void __iomem *reg; - - /* Claim the pin for MPU */ - reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; - __raw_writel(__raw_readl(reg) | (1 << offset), reg); - } -#endif - if (!cpu_class_is_omap1()) { - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= 0xFFFFFFFE; - __raw_writel(ctrl, reg); - } - bank->mod_usage |= 1 << offset; - } - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); -#ifdef CONFIG_ARCH_OMAP16XX - if (bank->method == METHOD_GPIO_1610) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - __raw_writel(1 << offset, reg); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - __raw_writel(1 << offset, reg); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (bank->method == METHOD_GPIO_44XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; - __raw_writel(1 << offset, reg); - } -#endif - if (!cpu_class_is_omap1()) { - bank->mod_usage &= ~(1 << offset); - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= 1; - __raw_writel(ctrl, reg); - } - } - _reset_gpio(bank, bank->chip.base + offset); - spin_unlock_irqrestore(&bank->lock, flags); -} - -/* - * We need to unmask the GPIO bank interrupt as soon as possible to - * avoid missing GPIO interrupts for other lines in the bank. - * Then we need to mask-read-clear-unmask the triggered GPIO lines - * in the bank to avoid missing nested interrupts for a GPIO line. - * If we wait to unmask individual GPIO lines in the bank after the - * line's interrupt handler has been run, we may miss some nested - * interrupts. - */ -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *isr_reg = NULL; - u32 isr; - unsigned int gpio_irq, gpio_index; - struct gpio_bank *bank; - u32 retrigger = 0; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); -#ifdef CONFIG_ARCH_OMAP1 - if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + - OMAP_MPUIO_GPIO_INT / bank->stride; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) - isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) - isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_7XX) - isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) - isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP4) - if (bank->method == METHOD_GPIO_44XX) - isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; -#endif - - if (WARN_ON(!isr_reg)) - goto exit; - - while(1) { - u32 isr_saved, level_mask = 0; - u32 enabled; - - enabled = _get_gpio_irqbank_mask(bank); - isr_saved = isr = __raw_readl(isr_reg) & enabled; - - if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) - isr &= 0x0000ffff; - - if (cpu_class_is_omap2()) { - level_mask = bank->level_mask & enabled; - } - - /* clear edge sensitive interrupts before handler(s) are - called so that we don't miss any interrupt occurred while - executing them */ - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); - _clear_gpio_irqbank(bank, isr_saved & ~level_mask); - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); - - /* if there is only edge sensitive GPIO pin interrupts - configured, we could unmask GPIO bank interrupt immediately */ - if (!level_mask && !unmasked) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - isr |= retrigger; - retrigger = 0; - if (!isr) - break; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); - - if (!(isr & 1)) - continue; - -#ifdef CONFIG_ARCH_OMAP1 - /* - * Some chips can't respond to both rising and falling - * at the same time. If this irq was requested with - * both flags, we need to flip the ICR data for the IRQ - * to respond to the IRQ for the opposite direction. - * This will be indicated in the bank toggle_mask. - */ - if (bank->toggle_mask & (1 << gpio_index)) - _toggle_gpio_edge_triggering(bank, gpio_index); -#endif - - generic_handle_irq(gpio_irq); - } - } - /* if bank has any level sensitive GPIO pin interrupt - configured, we must unmask the bank interrupt only after - handler(s) are executed in order to avoid spurious bank - interrupt */ -exit: - if (!unmasked) - chained_irq_exit(chip, desc); -} - -static void gpio_irq_shutdown(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _reset_gpio(bank, gpio); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _clear_gpio_irqstatus(bank, gpio); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 0); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - unsigned int irq_mask = 1 << get_gpio_index(gpio); - u32 trigger = irqd_get_trigger_type(d); - - if (trigger) - _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); - - /* For level-triggered GPIOs, the clearing must be done after - * the HW source is cleared, thus after the handler has run */ - if (bank->level_mask & irq_mask) { - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - } - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_shutdown = gpio_irq_shutdown, - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_irq_type, - .irq_set_wake = gpio_wake_enable, -}; - -/*---------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP1 - -/* MPUIO uses the always-on 32 |