Merge commit 'v2.6.37-rc7' into perf/core

Merge reason: Pick up the latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

28 files changed, 420 insertions, 211 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1d9297b1050..d56d21c0573b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1311,7 +1311,7 @@ config HZ
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && EXPERIMENTAL
+	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"
 
 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on !AEABI || OABI_COMPAT
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 62d686f0b426..d13add71f72a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
 
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index bba5a560e02b..feb65787c30b 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -31,6 +31,7 @@
 
 #include <mach/board.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
@@ -38,11 +39,7 @@
 
 static void __init pcontrol_g20_map_io(void)
 {
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
-	at91_register_uart(0, 0, 0);
+	stamp9g20_map_io();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void)
 
 	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
 	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 
@@ -66,38 +60,6 @@ static void __init init_irq(void)
 }
 
 
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.ncs_read_setup		= 16,
 	.nrd_setup		= 18,
@@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.tdf_cycles		= 1,
 } };
 
-static void __init add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &nand_smc_config);
-	at91_add_device_nand(&nand_data);
-}
-
-
 static void __init add_device_pcontrol(void)
 {
 	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
@@ -156,23 +110,6 @@ static void __init add_device_pcontrol(void)
 
 
 /*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-	},
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.wire4		= 1,
-};
-#endif
-
-
-/*
  * USB Host port
  */
 static struct at91_usbh_data __initdata usbh_data = {
@@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
 };
 
 
-/*
- * Dallas 1-Wire  DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	.pin		= AT91_PIN_PA29,
-	.is_open_drain	= 1,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-
 static void __init pcontrol_g20_board_init(void)
 {
-	at91_add_device_serial();
-	add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
+	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_eth(&macb_data);
 	at91_add_device_i2c(pcontrol_g20_i2c_devices,
 		ARRAY_SIZE(pcontrol_g20_i2c_devices));
-	add_wire1();
 	add_device_pcontrol();
 	at91_add_device_spi(pcontrol_g20_spi_devices,
 		ARRAY_SIZE(pcontrol_g20_spi_devices));
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 5206eef4a67e..f8902b118960 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,7 +32,7 @@
 #include "generic.h"
 
 
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+	stamp9g20_map_io();
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+	stamp9g20_map_io();
+
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
 						| ATMEL_UART_DTR | ATMEL_UART_DSR
@@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)
 
 	/* USART5 on ttyS6. (Rx, Tx only) */
 	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static void __init init_irq(void)
@@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
 
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
 	.vbus_pin	= AT91_PIN_PA22,
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
@@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
 	}
 };
 
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
 	{
 		.name			= "D8",
 		.gpio			= AT91_PIN_PB18,
@@ -250,7 +248,7 @@ void add_w1(void)
 }
 
 
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
@@ -262,34 +260,40 @@ static void __init generic_board_init(void)
 #else
 	at91_add_device_mmc(0, &mmc_data);
 #endif
-	/* USB Host */
-	at91_add_device_usbh(&usbh_data);
-	/* Ethernet */
-	at91_add_device_eth(&macb_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
 	/* W1 */
 	add_w1();
 }
 
 static void __init portuxg20_board_init(void)
 {
-	generic_board_init();
-	/* SPI */
-	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&portuxg20_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* SPI */
+	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
 	/* LEDs */
 	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
 }
 
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
 {
-	generic_board_init();
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
-	at91_add_device_udc(&stamp9g20_udc_data);
+	at91_add_device_udc(&stamp9g20evb_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
 	/* LEDs */
-	at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+	at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
 }
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
@@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= stamp9g20_map_io,
+	.map_io		= stamp9g20evb_map_io,
 	.init_irq	= init_irq,
-	.init_machine	= stamp9g20_board_init,
+	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7525cee3983f..9113da6845f1 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	/* Now set uhpck values */
 	uhpck.parent = &utmi_clk;
 	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz = utmi_clk.rate_hz;
 	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h
new file mode 100644
index 000000000000..6120f9c46d59
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/stamp9g20.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index daf3993349f8..2e3dd08ccc3f 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
 
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b2102952..9db9203667df 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "wl1271",
 		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 		.nonremovable	= true,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 40562ddd3ee4..a1939b1e6f82 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
 		return 0;
 
 	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
-	if (!dpll3_m2_ck)
+	if (IS_ERR(dpll3_m2_ck))
 		return -EINVAL;
 
 	rate = clk_get_rate(dpll3_m2_ck);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 5e81517a7af2..a8afb610c7d8 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c85923e56b85..aaeea49b9bdd 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,6 +53,19 @@
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
@@ -120,8 +133,9 @@ static void omap2_enter_full_retention(void)
 		goto no_sleep;
 
 	/* Block console output in case it is on one of the OMAP UARTs */
-	if (try_acquire_console_sem())
-		goto no_sleep;
+	if (!is_suspending())
+		if (try_acquire_console_sem())
+			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
@@ -136,7 +150,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
-	release_console_sem();
+	if (!is_suspending())
+		release_console_sem();
 
 no_sleep:
 	if (omap2_pm_debug) {
@@ -284,6 +299,12 @@ out:
 	local_irq_enable();
 }
 
+static int omap2_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	return 0;
+}
+
 static int omap2_pm_prepare(void)
 {
 	/* We cannot sleep in idle until we have resumed */
@@ -333,10 +354,17 @@ static void omap2_pm_finish(void)
 	enable_hlt();
 }
 
+static void omap2_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap2_pm_begin,
 	.prepare	= omap2_pm_prepare,
 	.enter		= omap2_pm_enter,
 	.finish		= omap2_pm_finish,
+	.end		= omap2_pm_end,
 	.valid		= suspend_valid_only_mem,
 };
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ec8a04b7473..648b8c50d024 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,6 +50,19 @@
 #include "sdrc.h"
 #include "control.h"
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 /* Scratchpad offsets */
 #define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
 #define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
@@ -387,10 +400,11 @@ void omap_sram_idle(void)
 	}
 
 	/* Block console output in case it is on one of the OMAP UARTs */
-	if (per_next_state < PWRDM_POWER_ON ||
-	    core_next_state < PWRDM_POWER_ON)
-		if (try_acquire_console_sem())
-			goto console_still_active;
+	if (!is_suspending())
+		if (per_next_state < PWRDM_POWER_ON ||
+		    core_next_state < PWRDM_POWER_ON)
+			if (try_acquire_console_sem())
+				goto console_still_active;
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
@@ -470,7 +484,8 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
-	release_console_sem();
+	if (!is_suspending())
+		release_console_sem();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -514,8 +529,6 @@ out:
 }
 
 #ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 298a22a754e2..f81acee4738d 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -243,13 +243,14 @@
 #define OMAP24XX_EN_GPT1_MASK				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK				2
-#define OMAP24XX_ST_GPT1_SHIFT				(1 << 0)
-#define OMAP24XX_ST_GPT1_MASK				0
+#define OMAP24XX_ST_GPIOS_SHIFT				2
+#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT				0
+#define OMAP24XX_ST_GPT1_MASK				(1 << 0)
 
 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT				(1 << 0)
+#define OMAP2430_ST_MDM_SHIFT				0
+#define OMAP2430_ST_MDM_MASK				(1 << 0)
 
 
 /* 3430 register bits shared between CM & PRM registers */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index d2060a1d1d68..e5c9932b7588 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index fa2e5bffbb8e..6983cb4d4cae 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -28,9 +28,16 @@ config S3C2412_DMA
 
 config S3C2412_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs with similar sleep procedure.
+
 # Note, the S3C2412 IOtiming support is in plat-s3c24xx
 
 config S3C2412_CPUFREQ
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 530ec46cbaea..6c48a91ea39e 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
 obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 27b3e7c9d613..df8d14974c90 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -27,6 +27,7 @@ config S3C2416_DMA
 
 config S3C2416_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2416 power management
 
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 28677caf3613..461aa035afc0 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = {
 static struct max8998_platform_data aquila_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(aquila_regulators),
 	.regulators	= aquila_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index b1dcf964a768..e22d5112fd44 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = {
 static struct max8998_platform_data goni_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(goni_regulators),
 	.regulators	= goni_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index a285d13c7416..f428c4db2b60 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2010 Magnus Damm
  * Copyright (C) 2008 Renesas Solutions Corp.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,24 +15,45 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#define INTCA_BASE	0xe6980000
+#define INTFLGA_OFFS	0x00000018 /* accept pending interrupt */
+#define INTEVTA_OFFS	0x00000020 /* vector number of accepted interrupt */
+#define INTLVLA_OFFS	0x00000030 /* priority level of accepted interrupt */
+#define INTLVLB_OFFS	0x00000034 /* previous priority level */
+
 	.macro  disable_fiq
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =INTFLGA
+	ldr     \base, =INTCA_BASE
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
 
 	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr     \irqnr, [\base]
+	/* The single INTFLGA read access below results in the following:
+	 *
+	 * 1. INTLVLB is updated with old priority value from INTLVLA
+	 * 2. Highest priority interrupt is accepted
+	 * 3. INTLVLA is updated to contain priority of accepted interrupt
+	 * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
+	 */
+	ldr     \irqnr, [\base, #INTFLGA_OFFS]
+
+	/* Restore INTLVLA with the value saved in INTLVLB.
+	 * This is required to support interrupt priorities properly.
+	 */
+	ldrb	\tmp, [\base, #INTLVLB_OFFS]
+	strb    \tmp, [\base, #INTLVLA_OFFS]
+
+	/* Handle invalid vector number case */
 	cmp	\irqnr, #0
 	beq	1000f
-	/* intevt to irq number */
+
+	/* Convert vector to irq number, same as the evt2irq() macro */
 	lsr	\irqnr, \irqnr, #0x5
 	subs	\irqnr, \irqnr, #16
 
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
index 4aecf6e3a859..2b8fd8b942fe 100644
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -2,6 +2,6 @@
 #define __ASM_MACH_VMALLOC_H
 
 /* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000
+#define VMALLOC_END 0xe6000000UL
 
 #endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 99fa688dfadd..c96fa1b3f49f 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]			@ read for ownership
+	strb	r2, [r0]			@ write for ownership
+#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -211,6 +215,10 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrneb	r2, [r1, #-1]			@ read for ownership
+	strneb	r2, [r1, #-1]			@ write for ownership
+#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@@ -218,10 +226,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@@ -229,6 +233,10 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlo	r2, [r0]			@ read for ownership
+	strlo	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -263,12 +271,12 @@ v6_dma_clean_range:
  *	- end     - virtual end address of region
  */
 EN