Merge tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/cleanup

Merge "qcom cleanup changes for 4.1" from Kumar Gala:

General cleanups for MSM/QCOM for 4.1

* Removal of mach-msm and associated drivers cleanups that have been
  ack'd by associated maintainers

* tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  + Linux 4.0-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>

67 files changed, 46 insertions, 8694 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f6c5b05e8de8..3b11aacef2c3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -625,18 +625,6 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MSM
-	bool "Qualcomm MSM (non-multiplatform)"
-	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM/QSD based systems.  This runs on the
-	  apps processor of the MSM/QSD and depends on a shared memory
-	  interface to the modem processor which runs the baseband
-	  stack and controls some vital subsystems
-	  (clock and power control, etc).
-
 config ARCH_SHMOBILE_LEGACY
 	bool "Renesas ARM SoCs (non-multiplatform)"
 	select ARCH_SHMOBILE
@@ -890,8 +878,6 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
 
-source "arch/arm/mach-msm/Kconfig"
-
 source "arch/arm/mach-moxart/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f2aa6c7af196..750ccde6a8ed 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -448,25 +448,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_MSM_UART
-		bool "Kernel low-level debugging messages via MSM UART"
-		depends on ARCH_MSM
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM devices.
-
-		  ARCH                DEBUG_UART_PHYS   DEBUG_UART_VIRT   #
-		  MSM7X00A, QSD8X50   0xa9a00000        0xe1000000        UART1
-		  MSM7X00A, QSD8X50   0xa9b00000        0xe1000000        UART2
-		  MSM7X00A, QSD8X50   0xa9c00000        0xe1000000        UART3
-
-		  MSM7X30             0xaca00000        0xe1000000        UART1
-		  MSM7X30             0xacb00000        0xe1000000        UART2
-		  MSM7X30             0xacc00000        0xe1000000        UART3
-
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
-		  options based on your needs.
-
 	config DEBUG_QCOM_UARTDM
 		bool "Kernel low-level debugging messages via QCOM UARTDM"
 		depends on ARCH_QCOM
@@ -1295,7 +1276,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART
 	default "debug/ks8695.S" if DEBUG_KS8695_UART
-	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+	default "debug/msm.S" if DEBUG_QCOM_UARTDM
 	default "debug/netx.S" if DEBUG_NETX_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
@@ -1388,7 +1369,6 @@ config DEBUG_UART_PHYS
 	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xa9a00000 if DEBUG_MSM_UART
 	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
 	default 0xc0013000 if DEBUG_U300_UART
@@ -1433,7 +1413,7 @@ config DEBUG_UART_PHYS
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_NETX_UART || \
+		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
@@ -1446,7 +1426,6 @@ config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
 	default 0xe0000a00 if DEBUG_NETX_UART
 	default 0xe0010fe0 if ARCH_RPC
-	default 0xe1000000 if DEBUG_MSM_UART
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0010000 if DEBUG_ASM9260_UART
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1526,7 +1505,7 @@ config DEBUG_UART_VIRT
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_NETX_UART || \
+		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
@@ -1556,7 +1535,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
 
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
+	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7f99cd652203..fa03c13ddfec 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -136,7 +136,6 @@ textofs-$(CONFIG_PM_H1940)      := 0x00108000
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
@@ -170,7 +169,6 @@ machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
-machine-$(CONFIG_ARCH_MSM)		+= msm
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
deleted file mode 100644
index dd18c9e527d6..000000000000
--- a/arch/arm/configs/msm_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_MSM=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_CLEANCACHE=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_RFKILL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_RTC_CLASS=y
-CONFIG_STAGING=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 37ca2a4c6f09..bf0fe99e8ca9 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -207,7 +207,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
 
 	bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
 
-	VM_BUG_ON(size & PAGE_MASK);
+	VM_BUG_ON(size & ~PAGE_MASK);
 
 	if (!need_flush && !icache_is_pipt())
 		goto vipt_cache;
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index e55a9426b496..b03024fa671f 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -16,24 +16,17 @@
  */
 
 	.macro	addruart, rp, rv, tmp
-#ifdef CONFIG_DEBUG_UART_PHYS
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS
 	ldr	\rv, =CONFIG_DEBUG_UART_VIRT
-#endif
 	.endm
 
 	.macro	senduart, rd, rx
 ARM_BE8(rev	\rd, \rd )
-#ifdef CONFIG_DEBUG_QCOM_UARTDM
 	@ Write the 1 character to UARTDM_TF
 	str	\rd, [\rx, #0x70]
-#else
-	str	\rd, [\rx, #0x0C]
-#endif
 	.endm
 
 	.macro	waituart, rd, rx
-#ifdef CONFIG_DEBUG_QCOM_UARTDM
 	@ check for TX_EMT in UARTDM_SR
 	ldr	\rd, [\rx, #0x08]
 ARM_BE8(rev     \rd, \rd )
@@ -55,13 +48,6 @@ ARM_BE8(rev     \rd, \rd )
 	str	\rd, [\rx, #0x40]
 	@ UARTDM reg. Read to induce delay
 	ldr	\rd, [\rx, #0x08]
-#else
-	@ wait for TX_READY
-1001:	ldr	\rd, [\rx, #0x08]
-ARM_BE8(rev     \rd, \rd )
-	tst	\rd, #0x04
-	beq	1001b
-#endif
 	.endm
 
 	.macro	busyuart, rd, rx
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 07e7eb1d7ab6..5560f74f9eee 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
 		kvm_guest_exit();
-		trace_kvm_exit(*vcpu_pc(vcpu));
+		trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 		/*
 		 * We may have taken a host interrupt in HYP mode (ie
 		 * while executing the guest). This interrupt is still
diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h
index 881874b1a036..6817664b46b8 100644
--- a/arch/arm/kvm/trace.h
+++ b/arch/arm/kvm/trace.h
@@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry,
 );
 
 TRACE_EVENT(kvm_exit,
-	TP_PROTO(unsigned long vcpu_pc),
-	TP_ARGS(vcpu_pc),
+	TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
+	TP_ARGS(exit_reason, vcpu_pc),
 
 	TP_STRUCT__entry(
+		__field(	unsigned int,	exit_reason	)
 		__field(	unsigned long,	vcpu_pc		)
 	),
 
 	TP_fast_assign(
+		__entry->exit_reason		= exit_reason;
 		__entry->vcpu_pc		= vcpu_pc;
 	),
 
-	TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
+	TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
+		  __entry->exit_reason,
+		  __entry->vcpu_pc)
 );
 
 TRACE_EVENT(kvm_guest_fault,
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
deleted file mode 100644
index a6b50e62a495..000000000000
--- a/arch/arm/mach-msm/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-if ARCH_MSM
-
-choice
-	prompt "Qualcomm MSM SoC Type"
-	default ARCH_MSM7X00A
-	depends on ARCH_MSM
-
-config ARCH_MSM7X00A
-	bool "MSM7x00A / MSM7x01A"
-	select ARCH_MSM_ARM11
-	select CPU_V6
-	select GPIO_MSM_V1
-	select MACH_TROUT if !MACH_HALIBUT
-	select MSM_PROC_COMM
-	select MSM_SMD
-	select CLKSRC_QCOM
-	select MSM_SMD_PKG3
-
-config ARCH_MSM7X30
-	bool "MSM7x30"
-	select ARCH_MSM_SCORPION
-	select CPU_V7
-	select GPIO_MSM_V1
-	select MACH_MSM7X30_SURF # if !
-	select MSM_GPIOMUX
-	select MSM_PROC_COMM
-	select MSM_SMD
-	select CLKSRC_QCOM
-	select MSM_VIC
-
-config ARCH_QSD8X50
-	bool "QSD8X50"
-	select ARCH_MSM_SCORPION
-	select CPU_V7
-	select GPIO_MSM_V1
-	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
-	select MSM_GPIOMUX
-	select MSM_PROC_COMM
-	select MSM_SMD
-	select CLKSRC_QCOM
-	select MSM_VIC
-
-endchoice
-
-config MSM_SOC_REV_A
-	bool
-
-config  ARCH_MSM_ARM11
-	bool
-
-config  ARCH_MSM_SCORPION
-	bool
-
-config  MSM_VIC
-	bool
-
-menu "Qualcomm MSM Board Type"
-	depends on ARCH_MSM
-
-config MACH_HALIBUT
-	depends on ARCH_MSM
-	depends on ARCH_MSM7X00A
-	bool "Halibut Board (QCT SURF7201A)"
-	help
-	  Support for the Qualcomm SURF7201A eval board.
-
-config MACH_TROUT
-	depends on ARCH_MSM
-	depends on ARCH_MSM7X00A
-	bool "HTC Dream (aka trout)"
-	help
-	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
-
-config MACH_MSM7X30_SURF
-	depends on ARCH_MSM7X30
-	bool "MSM7x30 SURF"
-	help
-	  Support for the Qualcomm MSM7x30 SURF eval board.
-
-config MACH_QSD8X50_SURF
-	depends on ARCH_QSD8X50
-	bool "QSD8x50 SURF"
-	help
-	  Support for the Qualcomm QSD8x50 SURF eval board.
-
-config MACH_QSD8X50A_ST1_5
-	depends on ARCH_QSD8X50
-	bool "QSD8x50A ST1.5"
-	select MSM_SOC_REV_A
-	help
-	  Support for the Qualcomm ST1.5.
-
-endmenu
-
-config MSM_SMD_PKG3
-	bool
-
-config MSM_PROC_COMM
-	bool
-
-config MSM_SMD
-	bool
-
-config MSM_GPIOMUX
-	bool
-	help
-	  Support for MSM V1 TLMM GPIOMUX architecture.
-
-endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
deleted file mode 100644
index 27c078a568df..000000000000
--- a/arch/arm/mach-msm/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-obj-$(CONFIG_MSM_PROC_COMM) += clock.o
-
-obj-$(CONFIG_MSM_VIC) += irq-vic.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
-obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
-
-obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
-
-obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
-obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
-obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
-obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
-obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
deleted file mode 100644
index 9b803a578b4d..000000000000
--- a/arch/arm/mach-msm/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-  zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
deleted file mode 100644
index 61bfe584a9d7..000000000000
--- a/arch/arm/mach-msm/board-halibut.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-msm/board-halibut.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "common.h"
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x9C004300,
-		.end	= 0x9C004400,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSM_GPIO_TO_INT(49),
-		.end	= MSM_GPIO_TO_INT(49),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_clock_7x01a,
-	&msm_device_gpio_7201,
-	&msm_device_uart3,
-	&msm_devic