diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-06-18 20:36:17 -1000 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-06-18 20:36:17 -1000 |
commit | 049a40c0a2d4b458583161ec1b9ce109408cb1aa (patch) | |
tree | e304d16877c0446b1a6119e8bfa469419b38efa9 /arch/arm | |
parent | c141afd1a28793c08c88325aa64b773be6f79ccf (diff) | |
parent | 8fd0976702f05042c776848819e5fd2a835f23c9 (diff) |
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another batch of fixes for ARM SoC platforms. Most are smaller fixes.
Two areas that are worth pointing out are:
- OMAP had a handful of changes to voltage specs that caused a bit of
churn, most of volume of change in this branch is due to this.
- There are a couple of _rcuidle fixes from Paul that touch common
code and came in through the OMAP tree since they were the ones who
saw the problems.
The rest is smaller changes across a handful of platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
ARM: OMAP2+: timer: add probe for clocksources
ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
arm: Use _rcuidle for smp_cross_call() tracepoints
MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
ARM: imx6ul: Fix Micrel PHY mask
ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
ARM: dts: DRA74x: fix DSS PLL2 addresses
ARM: OMAP2: Enable Errata 430973 for OMAP3
ARM: dts: socfpga: Add missing PHY phandle
ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
...
Diffstat (limited to 'arch/arm')
37 files changed, 248 insertions, 133 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 06b6c2d695bf..414b42710a36 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -741,6 +741,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ + sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index d82dd6e3f9b1..5687d6b4da60 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -418,7 +418,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps@24 { compatible = "ti,tps65218"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index b01a5948cdd0..0e63b9dff6e7 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -60,10 +60,26 @@ tps659038_pmic { compatible = "ti,tps659038-pmic"; + + smps12-in-supply = <&vmain>; + smps3-in-supply = <&vmain>; + smps45-in-supply = <&vmain>; + smps6-in-supply = <&vmain>; + smps7-in-supply = <&vmain>; + smps8-in-supply = <&vmain>; + smps9-in-supply = <&vmain>; + ldo1-in-supply = <&vmain>; + ldo2-in-supply = <&vmain>; + ldo3-in-supply = <&vmain>; + ldo4-in-supply = <&vmain>; + ldo9-in-supply = <&vmain>; + ldoln-in-supply = <&vmain>; + ldousb-in-supply = <&vmain>; + ldortc-in-supply = <&vmain>; + regulators { smps12_reg: smps12 { /* VDD_MPU */ - vin-supply = <&vmain>; regulator-name = "smps12"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -73,7 +89,6 @@ smps3_reg: smps3 { /* VDD_DDR EMIF1 EMIF2 */ - vin-supply = <&vmain>; regulator-name = "smps3"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; @@ -84,7 +99,6 @@ smps45_reg: smps45 { /* VDD_DSPEVE on AM572 */ /* VDD_IVA + VDD_DSP on AM571 */ - vin-supply = <&vmain>; regulator-name = "smps45"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -94,7 +108,6 @@ smps6_reg: smps6 { /* VDD_GPU */ - vin-supply = <&vmain>; regulator-name = "smps6"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -104,7 +117,6 @@ smps7_reg: smps7 { /* VDD_CORE */ - vin-supply = <&vmain>; regulator-name = "smps7"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -115,13 +127,11 @@ smps8_reg: smps8 { /* 5728 - VDD_IVAHD */ /* 5718 - N.C. test point */ - vin-supply = <&vmain>; regulator-name = "smps8"; }; smps9_reg: smps9 { /* VDD_3_3D */ - vin-supply = <&vmain>; regulator-name = "smps9"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -132,7 +142,6 @@ ldo1_reg: ldo1 { /* VDDSHV8 - VSDMMC */ /* NOTE: on rev 1.3a, data supply */ - vin-supply = <&vmain>; regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -142,7 +151,6 @@ ldo2_reg: ldo2 { /* VDDSH18V */ - vin-supply = <&vmain>; regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -152,7 +160,6 @@ ldo3_reg: ldo3 { /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ - vin-supply = <&vmain>; regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -162,7 +169,6 @@ ldo4_reg: ldo4 { /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ - vin-supply = <&vmain>; regulator-name = "ldo4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -174,7 +180,6 @@ ldo9_reg: ldo9 { /* VDD_RTC */ - vin-supply = <&vmain>; regulator-name = "ldo9"; regulator-min-microvolt = <840000>; regulator-max-microvolt = <1160000>; @@ -184,7 +189,6 @@ ldoln_reg: ldoln { /* VDDA_1V8_PLL */ - vin-supply = <&vmain>; regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -194,7 +198,6 @@ ldousb_reg: ldousb { /* VDDA_3V_USB: VDDA_USBHS33 */ - vin-supply = <&vmain>; regulator-name = "ldousb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -204,7 +207,6 @@ ldortc_reg: ldortc { /* VDDA_RTC */ - vin-supply = <&vmain>; regulator-name = "ldortc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index cbc17b0794b1..4128fa91823c 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -93,6 +93,10 @@ }; }; +&mmc1 { + status = "disabled"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; @@ -101,6 +105,10 @@ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; +&mmc3 { + status = "disabled"; +}; + &pincntl { sd1_pins: pinmux_sd1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 5d4313fd5a46..3f184863e0c5 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -45,6 +45,14 @@ phy-mode = "rgmii"; }; +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + status = "disabled"; +}; + &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&sd2_pins>; @@ -53,6 +61,7 @@ dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ dma-names = "tx", "rx"; + non-removable; }; &pincntl { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e0074014385a..3a8f3976f6f9 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1451,6 +1451,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 4220eeffc65a..5e06020f450b 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -107,8 +107,8 @@ reg = <0x58000000 0x80>, <0x58004054 0x4>, <0x58004300 0x20>, - <0x58005054 0x4>, - <0x58005300 0x20>; + <0x58009054 0x4>, + <0x58009300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index ddfe1f558c10..fa14f77df563 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -242,7 +242,7 @@ hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -485,13 +485,20 @@ edid-emulation = <5>; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index f9d2e4f1a0e0..1de972d46a87 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -163,7 +163,7 @@ hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -631,13 +631,20 @@ use-external-pwm; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 76056ba92ced..ed449827c3d3 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -85,7 +85,7 @@ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 41f5d386f21f..f4f2ce46d681 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -188,6 +188,7 @@ vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index d6f839cab649..b6971060648a 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -194,6 +194,12 @@ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ >; }; + + mmc1_wp_pins: pinmux_mmc1_cd_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */ + >; + }; }; &i2c3 { @@ -250,3 +256,8 @@ }; }; }; + +&mmc1 { + pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */ +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index d9e2d9c6e999..2b74a81d1de2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -288,7 +288,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ @@ -300,7 +300,7 @@ modem_pins: pinmux_modem { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a00ca761675d..927b17fc4ed8 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -97,7 +97,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ @@ -110,7 +110,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ @@ -120,7 +120,7 @@ modem_pins1: pinmux_modem_core1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index f19170bdcc1f..c29b41dc7b95 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -98,7 +98,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; @@ -107,7 +107,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; @@ -125,7 +125,7 @@ pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ - OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ >; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index dc759a3028b7..5d5b620b7d9b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -14,6 +14,29 @@ display0 = &hdmi0; }; + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vsys_cobra: fixedregulator-vsys_cobra { + compatible = "regulator-fixed"; + regulator-name = "vsys_cobra"; + vin-supply = <&vmain>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdds_1v8_main: fixedregulator-vdds_1v8_main { + compatible = "regulator-fixed"; + regulator-name = "vdds_1v8_main"; + vin-supply = <&smps7_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -309,7 +332,7 @@ wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; @@ -409,6 +432,26 @@ ti,ldo6-vibrator; + smps123-in-supply = <&vsys_cobra>; + smps45-in-supply = <&vsys_cobra>; + smps6-in-supply = <&vsys_cobra>; + smps7-in-supply = <&vsys_cobra>; + smps8-in-supply = <&vsys_cobra>; + smps9-in-supply = <&vsys_cobra>; + smps10_out2-in-supply = <&vsys_cobra>; + smps10_out1-in-supply = <&vsys_cobra>; + ldo1-in-supply = <&vsys_cobra>; + ldo2-in-supply = <&vsys_cobra>; + ldo3-in-supply = <&vdds_1v8_main>; + ldo4-in-supply = <&vdds_1v8_main>; + ldo5-in-supply = <&vsys_cobra>; + ldo6-in-supply = <&vdds_1v8_main>; + ldo7-in-supply = <&vsys_cobra>; + ldo8-in-supply = <&vsys_cobra>; + ldo9-in-supply = <&vmmcsd_fixed>; + ldoln-in-supply = <&vsys_cobra>; + ldousb-in-supply = <&vsys_cobra>; + regulators { smps123_reg: smps123 { /* VDD_OPP_MPU */ @@ -600,7 +643,8 @@ pinctrl-0 = <&twl6040_pins>; interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + /* audpwron gpio defined in the board specific dts */ vio-supply = <&smps7_reg>; v2v1-supply = <&smps9_reg>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 46ecb1dd3b5c..f75ce02fb398 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -35,6 +35,22 @@ }; }; +/* LDO4 is VPP1 - ball AD9 */ +&ldo4_reg { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/* + * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33, + * VDDA_HDMI - ball AN25 + */ +&ldo7_reg { + status = "okay"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &omap5_pmx_core { i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < @@ -52,3 +68,13 @@ <&gpio7 3 0>; /* 195, SDA */ }; +&twl6040 { + ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */ + OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ + >; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 60b3fbb3bf07..a51e60518eb6 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -51,3 +51,13 @@ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; + +&twl6040 { + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index a3601e4c0a2e..b844473601d2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -136,6 +136,7 @@ &gmac1 { status = "okay"; phy-mode = "rgmii"; + phy-handle = <&phy1>; snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>; snps,reset-active-low; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index ad8ba10764a3..d294e82447a2 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -24,18 +24,21 @@ compatible = "shared-dma-pool"; reg = <0x40000000 0x01000000>; no-map; + status = "disabled"; }; gp1_reserved: rproc@41000000 { compatible = "shared-dma-pool"; reg = <0x41000000 0x01000000>; no-map; + status = "disabled"; }; audio_reserved: rproc@42000000 { compatible = "shared-dma-pool"; reg = <0x42000000 0x01000000>; no-map; + status = "disabled"; }; dmu_reserved: rproc@43000000 { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 68b479b8772c..73c133f5e79c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -176,8 +176,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 360adfb1e9ca..d6ad6196a768 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -135,8 +135,6 @@ ®_dc1sw { regulator-name = "vcc-lcd-usb2"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; }; ®_dc5ldo { |