Merge tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 DTS update for 5.7:

 - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
 - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
 - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
 - Add SNVS clock description to pwrkey device for i.MX8 SoCs.
 - A number of updates on librem5-devkit board to add audio, proximity
   sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
   devices as well.
 - A series of patches from Anson Huang to update i.MX8 EVK boards
   for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
 - Add PCIe device nodes for LX2160A and LS1028A SoC.
 - Add FSPI deivce support for LX2160A evaluation boards.
 - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
 - Other small and random updates on LS1028A and i.MX8 support.

* tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
  arm64: dts: ls1028a: disable the felix switch by default
  arm64: dts: imx8mp: Add snvs clock to powerkey
  arm64: dts: imx8mn: Add snvs clock to powerkey
  arm64: dts: ls1028a: Add PCIe controller DT nodes
  arm64: dts: ls1028a: sl28: add support for variant 2
  arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
  arm64: dts: ls1028a: sl28: fix on-board EEPROMS
  arm64: dts: freescale: sl28: add SPI flash
  arm64: dts: imx8m: fix aips dts node
  arm64: dts: imx8mn: Add CPU thermal zone support
  arm64: dts: imx8mm: Add thermal zone support
  arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
  arm64: dts: enable fspi in imx8mm dts
  arm64: dts: imx8mn: align name for crypto child nodes
  arm64: dts: lx2160aqds: Add FSPI node properties
  arm64: dts: lx2160ardb: Update FSPI node properties
  arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
  arm64: dts: layerscape: add iommu-map property to pci nodes
  arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
  arm64: dts: imx8mp-evk: Add i2c3 support
  ...

Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

29 files changed, 3320 insertions, 35 deletions

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bac293e6ee33..a39f0a1723e0 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -4,6 +4,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
@@ -26,6 +31,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
new file mode 100644
index 000000000000..4b4cc6a1573d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree File for the Kontron KBox A-230-LS.
+ *
+ * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
+ * carrier (s1914).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28-var4.dts"
+
+/ {
+	model = "Kontron KBox A-230-LS";
+	compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
+		     "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	/* BCM54140 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@7 {
+		reg = <7>;
+	};
+
+	qsgmii_phy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+
+	qsgmii_phy2: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	qsgmii_phy3: ethernet-phy@10 {
+		reg = <10>;
+	};
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 000000000000..901b5b161def
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/*
+	 * In the base device tree the PHY was registered in the mdio
+	 * subnode as it is PHY for this port. On this module this PHY
+	 * is connected to a switch port instead and registered above.
+	 * Therefore, delete the mdio subnode as well as the phy-handle
+	 * property here.
+	 */
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "gbe0";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "gbe1";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
new file mode 100644
index 000000000000..0973a6a45217
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
+ * carrier (ADS2).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
+	compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&dailink0_master>;
+			frame-master = <&dailink0_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai6>;
+			};
+
+			dailink0_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&dailink1_master>;
+			frame-master = <&dailink1_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai5>;
+			};
+
+			dailink1_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+	};
+};
+
+&dspi2 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+		assigned-clocks = <&mclk>;
+		assigned-clock-rates = <1250000>;
+	};
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&soc {
+	mclk: clock-mclk@f130080 {
+		compatible = "fsl,vf610-sai-clock";
+		reg = <0x0 0xf130080 0x0 0x80>;
+		clocks = <&clockgen 4 1>;
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
new file mode 100644
index 000000000000..df212ed5bb94
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (Dual PHY)";
+	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_port1 {
+	phy-handle = <&phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@4 {
+			reg = <0x4>;
+			eee-broken-1000t;
+			eee-broken-100tx;
+
+			qca,clk-out-frequency = <125000000>;
+			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+
+			vddio-supply = <&vddh>;
+
+			vddio: vddio-regulator {
+				regulator-name = "VDDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh: vddh-regulator {
+				regulator-name = "VDDH";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 000000000000..1648a04ea79f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@5 {
+			reg = <0x5>;
+			eee-broken-1000t;
+			eee-broken-100tx;
+		};
+	};
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partition@0 {
+			reg = <0x000000 0x010000>;
+			label = "rcw";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x010000 0x0f0000>;
+			label = "failsafe bootloader";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x100000 0x040000>;
+			label = "failsafe DP firmware";
+			read-only;
+		};
+
+		partition@140000 {
+			reg = <0x140000 0x0a0000>;
+			label = "failsafe trusted firmware";
+			read-only;
+		};
+
+		partition@1e0000 {
+			reg = <0x1e0000 0x020000>;
+			label = "reserved";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x010000>;
+			label = "configuration store";
+		};
+
+		partition@210000 {
+			reg = <0x210000 0x0f0000>;
+			label = "bootloader";
+		};
+
+		partition@300000 {
+			reg = <0x300000 0x040000>;
+			label = "DP firmware";
+		};
+
+		partition@340000 {
+			reg = <0x340000 0x0a0000>;
+			label = "trusted firmware";
+		};
+
+		partition@3e0000 {
+			reg = <0x3e0000 0x020000>;
+			label = "bootloader environment";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "TDO", "TCK",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "TMS", "TDI",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index ca409d907b36..dd69c5b821e9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -225,6 +225,7 @@
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
+	status = "okay";
 };
 
 &sai1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb55653850d..c2dc1232f93f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -177,9 +177,29 @@
 	status = "okay";
 };
 
+&enetc_mdio_pf3 {
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
 &enetc_port0 {
 	phy-handle = <&sgmii_phy0>;
 	phy-connection-type = "sgmii";
+	status = "okay";
 
 	mdio {
 		#address-cells = <1>;
@@ -190,8 +210,49 @@
 	};
 };
 
-&enetc_port1 {
-	status = "disabled";
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
 };
 
 &sai4 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 0bf375ec959b..09f37ba38b38 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -290,6 +290,45 @@
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <3>;
+			little-endian;
+			status = "disabled";
+		};
+
 		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -411,6 +450,60 @@
 			status = "disabled";
 		};
 
+		pcie@3400000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
@@ -683,7 +776,6 @@
 			reg = <0x01 0xf0000000 0x0 0x100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 			msi-parent = <&its>;
 			device_type = "pci";
 			bus-range = <0x0 0x0>;
@@ -701,27 +793,115 @@
 				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
 				  0x82000000 0x0 0x00000000  0x1 0xf8210000  0x0 0x020000
 				  /* PF1: VF0-1 BAR2 - prefetchable memory */
-				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000>;
+				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000
+				  /* BAR4 (PF5) - non-prefetchable memory */
+				  0x82000000 0x0 0x00000000  0x1 0xfc000000  0x0 0x400000>;
 
 			enetc_port0: ethernet@0,0 {
 				compatible = "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
+				status = "disabled";
 			};
+
 			enetc_port1: ethernet@0,1 {
 				compatible = "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
+				status = "disabled";
+			};
+
+			enetc_port2: ethernet@0,2 {
+				compatible = "fsl,enetc";
+				reg = <0x000200 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
+
 			enetc_mdio_pf3: mdio@0,3 {
 				compatible = "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen 4 0>;
 				little-endian;
+				fsl,extts-fifo;
+			};
+
+			mscc_felix: ethernet-switch@0,5 {
+				reg = <0x000500 0 0 0 0>;
+				/* IEP INT_B */
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* External ports */
+					mscc_felix_port0: port@0 {
+						reg = <0>;
+						status = "disabled";
+					};
+
+					mscc_felix_port1: port@1 {
+						reg = <1>;
+						status = "disabled";
+					};
+
+					mscc_felix_port2: port@2 {
+						reg = <2>;
+						status = "disabled";
+					};
+
+					mscc_felix_port3: port@3 {
+						reg = <3>;
+						status = "disabled";
+					};
+
+					/* Internal ports */
+					mscc_felix_port4: port@4 {
+						reg = <4>;
+						phy-mode = "internal";
+						status = "disabled";
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+
+					mscc_felix_port5: port@5 {
+						reg = <5>;
+						phy-mode = "internal";
+						status = "disabled";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+
+			enetc_port3: ethernet@0,6 {
+				compatible = "fsl,enetc";
+				reg = <0x000600 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
 	};