Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

16 files changed, 34 insertions, 1094 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 616b96e86ad4..d05ba759da30 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o devices.o id.o timer.o pm.o
+obj-y				:= cpu.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 43d6cb8c381d..9309ad4cbd09 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,16 +7,13 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/dma-ste-dma40.h>
 
-#include "devices.h"
 #include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
-#include "devices-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 0efb1560fc35..f63619b69113 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -10,94 +10,18 @@
 #include <linux/string.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
 
 #include "board-mop500.h"
 
-enum custom_pin_cfg_t {
-	PINS_FOR_DEFAULT,
-	PINS_FOR_U9500,
-};
-
-static enum custom_pin_cfg_t pinsfor;
-
 /* These simply sets bias for pins */
 #define BIAS(a,b) static unsigned long a[] = { b }
 
-BIAS(pd, PIN_PULL_DOWN);
-BIAS(in_nopull, PIN_INPUT_NOPULL);
-BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
-BIAS(in_pu, PIN_INPUT_PULLUP);
-BIAS(in_pd, PIN_INPUT_PULLDOWN);
-BIAS(out_hi, PIN_OUTPUT_HIGH);
-BIAS(out_lo, PIN_OUTPUT_LOW);
-BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
-
 BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
 BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
 BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
 
-/* These also force them into GPIO mode */
-BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
-BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
-BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
-/* Sleep modes */
-BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_ENABLED);
-BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_DISABLED);
-BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_DISABLED);
-
-/* We use these to define hog settings that are always done on boot */
-#define DB8500_MUX_HOG(group,func) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
-#define DB8500_PIN_HOG(pin,conf) \
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
-
-/* These are default states associated with device and changed runtime */
-#define DB8500_MUX(group,func,dev) \
-	PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
-#define DB8500_PIN(pin,conf,dev) \
-	PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
-#define DB8500_PIN_IDLE(pin, conf, dev) \
-	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500",	\
-			    pin, conf)
-#define DB8500_PIN_SLEEP(pin, conf, dev) \
-	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
-			    pin, conf)
-#define DB8500_MUX_STATE(group, func, dev, state) \
-	PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func)
-#define DB8500_PIN_STATE(pin, conf, dev, state) \
-	PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
-
 #define AB8500_MUX_HOG(group, func) \
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
 #define AB8500_PIN_HOG(pin, conf) \
@@ -344,725 +268,8 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
 	AB8505_PIN_HOG("GPIO53_D15", in_pd),
 };
 
-/* Pin control settings */
-static struct pinctrl_map __initdata mop500_family_pinmap[] = {
-	/*
-	 * uMSP0, mux in 4 pins, regular placement of RX/TX
-	 * explicitly set the pins to no pull
-	 */
-	DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
-	DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
-	DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
-	DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
-	DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
-	DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
-	/* MSP2 for HDMI, pull down TXD, TCK, TFS  */
-	DB8500_MUX_HOG("msp2_a_1", "msp2"),
-	DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
-	DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
-	DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
-	DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
-	/*
-	 * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
-	 * pull-up
-	 * TODO: is this really correct? Snowball doesn't have a LCD.
-	 */
-	DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
-	DB8500_PIN_HOG("GPIO68_E1", in_pu),
-	DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
-	/*
-	 * STMPE1601/tc35893 keypad IRQ GPIO 218
-	 * TODO: set for snowball and HREF really??
-	 */
-	DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
-	/*
-	 * UART0, we do not mux in u0 here.
-	 * uart-0 pins gpio configuration should be kept intact to prevent
-	 * a glitch in tx line when the tty dev is opened. Later these pins
-	 * are configured by uart driver
-	 */
-	DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
-	DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
-	DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
-	DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
-	/*
-	 * Mux in UART2 on altfunction C and set pull-ups.
-	 * TODO: is this used on U8500 variants and Snowball really?
-	 * The setting on GPIO31 conflicts with magnetometer use on hrefv60
-	 */
-	/* default state for UART2 */
-	DB8500_MUX("u2rxtx_c_1", "u2", "uart2"),
-	DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */
-	DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */
-	/* Sleep state for UART2 */
-	DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"),
-	DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"),
-	/*
-	 * The following pin sets were known as "runtime pins" before being
-	 * converted to the pinctrl model. Here we model them as "default"
-	 * states.
-	 */
-	/* Mux in UART0 after initialization */
-	DB8500_MUX("u0_a_1", "u0", "uart0"),
-	DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
-	DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
-	DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
-	DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
-	/* Sleep state for UART0 */
-	DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
-	/* Mux in UART1 after initialization */
-	DB8500_MUX("u1rxtx_a_1", "u1", "uart1"),
-	DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */
-	DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */
-	/* Sleep state for UART1 */
-	DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"),
-	DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"),
-	/* MSP1 for ALSA codec */
-	DB8500_MUX_HOG("msp1txrx_a_1", "msp1"),
-	DB8500_MUX_HOG("msp1_a_1", "msp1"),
-	DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup),
-	DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup),
-	DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup),
-	DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup),
-	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
-	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
-	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
-	/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
-	DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
-	DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
-	/* LCD VSI1 sleep state */
-	DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
-	/* Mux in i2c0 block, default state */
-	DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
-	/* i2c0 sleep state */
-	DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
-	/* Mux in i2c1 block, default state  */
-	DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
-	/* i2c1 sleep state */
-	DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
-	/* Mux in i2c2 block, default state  */
-	DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
-	/* i2c2 sleep state */
-	DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
-	/* Mux in i2c3 block, default state  */
-	DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
-	/* i2c3 sleep state */
-	DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
-	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
-	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
-	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
-	DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
-	DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
-	DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
-	DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
-	DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
-	DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
-	DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
-	DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
-	DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
-	/* SDI0 sleep state */
-	DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"),
-
-	/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
-	DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
-	DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
-	DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
-	DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
-	DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
-	DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
-	DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
-	DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
-	/* SDI1 sleep state */
-	DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */
-
-	/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
-	DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
-	DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
-	DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
-	DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
-	DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
-	DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
-	DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
-	DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
-	DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
-	DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
-	DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
-	DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
-	/* SDI2 sleep state */
-	DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */
-	DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */
-
-	/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
-	DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
-	DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
-	DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
-	DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
-	DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
-	DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
-	DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
-	DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
-	DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
-	DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
-	DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
-	DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
-	/*SDI4 sleep state */
-	DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */
-	DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
-
-	/* Mux in USB pins, drive STP high */
-	/* USB default state */
-	DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
-	DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
-	/* USB sleep state */
-	DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
-	DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
-	DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
-	DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
-	DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
-	DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
-	DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
-
-	/* Mux in SPI2 pins on the "other C1" altfunction */
-	DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
-	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
-	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
-	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
-	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
-	/* SPI2 idle state */
-	DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
-	DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
-	DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-	/* SPI2 sleep state */
-	DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
-	DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
-	DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
-	DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-
-	/* ske default state */
-	DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
-	DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
-	/* ske sleep state */
-	DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
-	/* STM APE pins states */
-	DB8500_MUX_STATE("stmape_c_1", "stmape",
-		"stm", "ape_mipi34"),
-	DB8500_PIN_STATE("GPIO70_G5", in_nopull,
-		"stm", "ape_mipi34"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", in_nopull,
-		"stm", "ape_mipi34"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", in_nopull,
-		"stm", "ape_mipi34"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", in_nopull,
-		"stm", "ape_mipi34"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", in_nopull,
-		"stm", "ape_mipi34"), /* dat0 */
-
-	DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat0 */
-
-	DB8500_MUX_STATE("stmape_oc1_1", "stmape",
-		"stm", "ape_microsd"),
-	DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
-		"stm", "ape_microsd"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
-		"stm", "ape_microsd"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
-		"stm", "ape_microsd"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
-		"stm", "ape_microsd"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
-		"stm", "ape_microsd"), /* dat3 */
-
-	DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat3 */
-
-	/*  STM Modem pins states */
-	DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
-		"stm", "mod_mipi34"),
-	DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
-		"stm", "mod_mipi34"),
-	DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
-		"stm", "mod_mipi34"),
-	DB8500_PIN_STATE("GPIO70_G5", in_nopull,
-		"stm", "mod_mipi34"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", in_nopull,
-		"stm", "mod_mipi34"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", in_nopull,
-		"stm", "mod_mipi34"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", in_nopull,
-		"stm", "mod_mipi34"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", in_nopull,
-		"stm", "mod_mipi34"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", in_pu,
-		"stm", "mod_mipi34"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", out_lo,
-		"stm", "mod_mipi34"), /* uartmod tx */
-
-	DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_sleep"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
-		"stm", "mod_mipi34_sleep"), /* uartmod tx */
-
-	DB8500_MUX_STATE("stmmod_b_1", "stmmod",
-		"stm", "mod_microsd"),
-	DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
-		"stm", "mod_microsd"),
-	DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
-		"stm", "mod_microsd"),
-	DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
-		"stm", "mod_microsd"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
-		"stm", "mod_microsd"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
-		"stm", "mod_microsd"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
-		"stm", "mod_microsd"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
-		"stm", "mod_microsd"), /* dat3 */
-	DB8500_PIN_STATE("GPIO75_H2", in_pu,
-		"stm", "mod_microsd"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", out_lo,
-		"stm", "mod_microsd"), /* uartmod tx */
-
-	DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* uartmod tx */
-
-	/*  STM dual Modem/APE pins state */
-	DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_MUX_STATE("stmape_c_2", "stmape",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_PIN_STATE("GPIO70_G5", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", in_pu,
-		"stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", out_lo,
-		"stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */
-	DB8500_PIN_STATE("GPIO155_C19", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* clk */
-	DB8500_PIN_STATE("GPIO156_C17", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
-	DB8500_PIN_STATE("GPIO157_A18", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
-	DB8500_PIN_STATE("GPIO158_C18", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
-	DB8500_PIN_STATE("GPIO159_B19", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
-
-	DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */
-	DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
-};
-
-/*
- * These are specifically for the MOP500 and HREFP (pre-v60) version of the
- * board, which utilized a TC35892 GPIO expander instead of using a lot of
- * on-chip pins as the HREFv60 and later does.
- */
-static struct pinctrl_map __initdata mop500_pinmap[] = {
-	/* Mux in SSP0, pull down RXD pin */
-	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
-	DB8500_PIN_HOG("GPIO145_C13", pd),
-	/*
-	 * XENON Flashgun on image processor GPIO (controlled from image
-	 * processor firmware), mux in these image processor GPIO lines 0
-	 * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
-	 * the pins.
-	 */
-	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
-	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
-	DB8500_PIN_HOG("GPIO6_AF6", in_pu),
-	DB8500_PIN_HOG("GPIO7_AG5", in_pu),
-	/* TC35892 IRQ, pull up the line, let the driver mux in the pin */
-	DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
-	/* Mux in UART1 and set the pull-ups */
-	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
-	DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
-	DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
-	/*
-	 * Runtime stuff: make it possible to mux in the SKE keypad
-	 * and bias the pins
-	 */
-	/* ske default state */
-	DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
-	DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
-	/* ske sleep state */
-	DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
-	/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
-	DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
-	DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
-};
-
-/*
- * The HREFv60 series of platforms is using available pins on the DB8500
- * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
- * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
- */
-static struct pinctrl_map __initdata hrefv60_pinmap[] = {
-	/* Drive WLAN_ENA low */
-	DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
-	/*
-	 * XENON Flashgun on image processor GPIO (controlled from image
-	 * processor firmware), mux in these image processor GPIO lines 0
-	 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
-	 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
-	 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
-	 */
-	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
-	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
-	DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
-	DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
-	DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
-	DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
-	DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
-	/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
-	DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
-	DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
-	/*
-	 * Display Interface 1 uses GPIO 65 for RST (reset).
-	 * Display Interface 2 uses GPIO 66 for RST (reset).
-	 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
-	 */
-	DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
-	DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
-	/*
-	 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
-	 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
-	 * reset signals low.
-	 */
-	DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
-	DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu)