Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform updates from Olof Johansson:
 "More multiplatform enablement for ARM platforms.  The ones converted
  in this branch are:

   - bcm2835
   - cns3xxx
   - sirf
   - nomadik
   - msx
   - spear
   - tegra
   - ux500

  We're getting close to having most of them converted!

  One of the larger platforms remaining is Samsung Exynos, and there are
  a bunch of supporting patches in this merge window for it.  There was
  a patch in this branch to a early version of multiplatform conversion,
  but it ended up being reverted due to need of more bake time.  The
  revert commit is part of the branch since it would have required
  rebasing multiple dependent branches and they were stable by then"

* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
  clocksource: nomadik-mtu: fix up clocksource/timer
  Revert "ARM: exynos: enable multiplatform support"
  ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
  ARM: exynos: enable multiplatform support
  rtc: s3c: make header file local
  mtd: onenand/samsung: make regs-onenand.h file local
  thermal/exynos: remove unnecessary header inclusions
  mmc: sdhci-s3c: remove platform dependencies
  ARM: samsung: move mfc device definition to s5p-dev-mfc.c
  ARM: exynos: move debug-macro.S to include/debug/
  ARM: exynos: prepare for sparse IRQ
  ARM: exynos: introduce EXYNOS_ATAGS symbol
  ARM: tegra: build assembly files with -march=armv7-a
  ARM: Push selects for TWD/SCU into machine entries
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
  ...

26 files changed, 2999 insertions, 0 deletions

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
new file mode 100644
index 000000000000..442917eedff3
--- /dev/null
+++ b/arch/arm/mach-spear/Kconfig
@@ -0,0 +1,105 @@
+#
+# SPEAr Platform configuration file
+#
+
+menuconfig PLAT_SPEAR
+	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
+	default PLAT_SPEAR_SINGLE
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+
+if PLAT_SPEAR
+
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx"
+	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	select ARCH_HAS_CPUFREQ
+	select ARM_GIC
+	select CPU_V7
+	select GPIO_SPEAR_SPICS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	select USE_OF
+	help
+	  Supports for ARM's SPEAR13XX family
+
+if ARCH_SPEAR13XX
+
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+
+endif #ARCH_SPEAR13XX
+
+config ARCH_SPEAR3XX
+	bool "ST SPEAr3xx"
+	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on !ARCH_SPEAR13XX
+	select ARM_VIC
+	select CPU_ARM926T
+	select PINCTRL
+	select USE_OF
+	help
+	  Supports for ARM's SPEAR3XX family
+
+if ARCH_SPEAR3XX
+
+config MACH_SPEAR300
+	bool "SPEAr300 Machine support with Device Tree"
+	select PINCTRL_SPEAR300
+	help
+	  Supports ST SPEAr300 machine configured via the device-tree
+
+config MACH_SPEAR310
+	bool "SPEAr310 Machine support with Device Tree"
+	select PINCTRL_SPEAR310
+	help
+	  Supports ST SPEAr310 machine configured via the device-tree
+
+config MACH_SPEAR320
+	bool "SPEAr320 Machine support with Device Tree"
+	select PINCTRL_SPEAR320
+	help
+	  Supports ST SPEAr320 machine configured via the device-tree
+
+endif
+
+config ARCH_SPEAR6XX
+	bool "ST SPEAr6XX"
+	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on !ARCH_SPEAR13XX
+	select ARM_VIC
+	select CPU_ARM926T
+	help
+	  Supports for ARM's SPEAR6XX family
+
+config MACH_SPEAR600
+	def_bool y
+	depends on ARCH_SPEAR6XX
+	select USE_OF
+	help
+	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
+
+config ARCH_SPEAR_AUTO
+	def_bool PLAT_SPEAR_SINGLE
+	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
+	select ARCH_SPEAR3XX
+
+endif
+
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
new file mode 100644
index 000000000000..af9bffb94f1c
--- /dev/null
+++ b/arch/arm/mach-spear/Makefile
@@ -0,0 +1,26 @@
+#
+# SPEAr Platform specific Makefile
+#
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+# Common support
+obj-y	:= restart.o time.o
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o
+obj-$(CONFIG_MACH_SPEAR300)	+= spear300.o
+obj-$(CONFIG_MACH_SPEAR310)	+= spear310.o
+obj-$(CONFIG_MACH_SPEAR320)	+= spear320.o
+
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o
+
+CFLAGS_hotplug.o		+= -march=armv7-a
diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot
new file mode 100644
index 000000000000..4674a4c221db
--- /dev/null
+++ b/arch/arm/mach-spear/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
new file mode 100644
index 000000000000..8ba7e75b648d
--- /dev/null
+++ b/arch/arm/mach-spear/generic.h
@@ -0,0 +1,59 @@
+/*
+ * spear machine family generic header file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <linux/amba/pl08x.h>
+#include <linux/init.h>
+#include <asm/mach/time.h>
+
+extern void spear13xx_timer_init(void);
+extern void spear3xx_timer_init(void);
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+
+void __init spear_setup_of_timer(void);
+void __init spear3xx_clk_init(void __iomem *misc_base,
+			      void __iomem *soc_config_base);
+void __init spear3xx_map_io(void);
+void __init spear3xx_dt_init_irq(void);
+void __init spear6xx_clk_init(void __iomem *misc_base);
+void __init spear13xx_map_io(void);
+void __init spear13xx_l2x0_init(void);
+
+void spear_restart(char, const char *);
+
+void spear13xx_secondary_startup(void);
+void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
+#else
+static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void __iomem *misc_base);
+#else
+static inline void spear1340_clk_init(void __iomem *misc_base) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S
new file mode 100644
index 000000000000..ed85473a047f
--- /dev/null
+++ b/arch/arm/mach-spear/headsmp.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c
new file mode 100644
index 000000000000..a7d2dd11a4f2
--- /dev/null
+++ b/arch/arm/mach-spear/hotplug.c
@@ -0,0 +1,103 @@
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref spear13xx_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	spear13xx_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
diff --git a/arch/arm/mach-spear/include/mach/debug-macro.S b/arch/arm/mach-spear/include/mach/debug-macro.S
new file mode 100644
index 000000000000..75b05ad0fbad
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-spear/include/plat/debug-macro.S
+ *
+ * Debugging macro include header for spear platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+		.macro	addruart, rp, rv, tmp
+		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
+		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		.endm
+
+		.macro	senduart, rd, rx
+		strb	\rd, [\rx, #UART01x_DR]			@ ASC_TX_BUFFER
+		.endm
+
+		.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
+		tst	\rd, #UART01x_FR_TXFF			@ TX_FULL
+		bne	1001b
+		.endm
+
+		.macro	busyuart, rd, rx
+1002:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
+		tst	\rd, #UART011_FR_TXFE			@ TX_EMPTY
+		beq	1002b
+		.endm
diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h
new file mode 100644
index 000000000000..92da0a8c6bce
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/irqs.h
@@ -0,0 +1,35 @@
+/*
+ * IRQ helper macros for spear machine family
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#ifdef CONFIG_ARCH_SPEAR3XX
+#define NR_IRQS			256
+#endif
+
+#ifdef CONFIG_ARCH_SPEAR6XX
+/* IRQ definitions */
+/* VIC 1 */
+#define IRQ_VIC_END				64
+
+/* GPIO pins virtual irqs */
+#define VIRTUAL_IRQS				24
+#define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
+#endif
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+#endif
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h
new file mode 100644
index 000000000000..935639ce59ba
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/misc_regs.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+
+#include <mach/spear.h>
+
+#define MISC_BASE		(VA_SPEAR_ICM3_MISC_REG_BASE)
+#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
+
+#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
new file mode 100644
index 000000000000..374ddc393df1
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -0,0 +1,95 @@
+/*
+ * SPEAr3xx/6xx Machine family specific definition
+ *
+ * Copyright (C) 2009,2012 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR_H
+#define __MACH_SPEAR_H
+
+#include <asm/memory.h>
+
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX)
+
+/* ICM1 - Low speed connection */
+#define SPEAR_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR_ICM1_2_BASE		IOMEM(0xFD000000)
+#define SPEAR_ICM1_UART_BASE		UL(0xD0000000)
+#define VA_SPEAR_ICM1_UART_BASE		(VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
+
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR_ICM3_ML1_2_BASE		UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE		IOMEM(0xF0000000)
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR_ICM3_SMI_CTRL_BASE	IOMEM(0xFC000000)
+#define SPEAR_ICM3_DMA_BASE		UL(0xFC400000)
+#define SPEAR_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
+#define VA_SPEAR_ICM3_SYS_CTRL_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE)
+#define SPEAR_ICM3_MISC_REG_BASE	UL(0xFCA80000)
+#define VA_SPEAR_ICM3_MISC_REG_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR_ICM1_UART_BASE
+#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR_ICM1_UART_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR_ICM3_SYS_CTRL_BASE
+#endif /* SPEAR3xx || SPEAR6XX */
+
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE	IOMEM(0xFE000000)
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			IOMEM(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				IOMEM(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			IOMEM(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				IOMEM(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(0xFD700000)
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			IOMEM(0xFC000000)
+
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			IOMEM(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* SPEAR13XX */
+
+#endif /* __MACH_SPEAR_H */
diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h
new file mode 100644
index 000000000000..ef95e5b780bd
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/timex.h
+ *
+ * SPEAr platform specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIMEX_H
+#define __PLAT_TIMEX_H
+
+#define CLOCK_TICK_RATE			48000000
+
+#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h
new file mode 100644
index 000000000000..51b2dc93e4da
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/uncompress.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-spear/include/plat/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+#ifndef __PLAT_UNCOMPRESS_H
+#define __PLAT_UNCOMPRESS_H
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
+
+	while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	writel_relaxed(c, base + UART01x_DR);
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c
new file mode 100644
index 000000000000..cfa1199d0f4a
--- /dev/null
+++ b/arch/arm/mach-spear/pl080.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+	unsigned char busy;
+	unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(const struct pl08x_channel_data *cd)
+{
+	unsigned int signal = cd->min_signal, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* Return if signal is already acquired by somebody else */
+	if (signals[signal].busy &&
+			(signals[signal].val != cd->muxval)) {
+		spin_unlock_irqrestore(&lock, flags);
+		return -EBUSY;
+	}
+
+	/* If acquiring for the first time, configure it */
+	if (!signals[signal].busy) {
+		val = readl(DMA_CHN_CFG);
+
+		/*
+		 * Each request line has two bits in DMA_CHN_CFG register. To
+		 * goto the bits of current request line, do left shift of
+		 * value by 2 * signal number.
+		 */
+		val &= ~(0x3 << (signal * 2));
+		val |= cd->muxval << (signal * 2);
+		writel(val, DMA_CHN_CFG);
+	}
+
+	signals[signal].busy++;
+	signals[signal].val = cd->muxval;
+	spin_unlock_irqrestore(&lock, flags);
+
+	return signal;
+}
+
+void pl080_put_signal(const struct pl08x_channel_data *cd, int signal)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* if signal is not used */
+	if (!signals[signal].busy)
+		BUG();
+
+	signals[signal].busy--;
+
+	spin_unlock_irqrestore(&lock, flags);
+}
diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h
new file mode 100644
index 000000000000..eb6590ded40d
--- /dev/null
+++ b/arch/arm/mach-spear/pl080.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_channel_data;
+int pl080_get_signal(const struct pl08x_channel_data *cd);
+void pl080_put_signal(const struct pl08x_channel_data *cd, int signal);
+
+#endif /* __PLAT_PL080_H */
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
new file mode 100644
index 000000000000..9c4c722c954e
--- /dev/null
+++ b/arch/arm/mach-spear/platsmp.c
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+#include "generic.h"
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+
+static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
+{
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init spear13xx_smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}
+
+struct smp_operations spear13xx_smp_ops __initdata = {
+       .smp_init_cpus		= spear13xx_smp_init_cpus,
+       .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
+       .smp_secondary_init	= spear13xx_secondary_init,
+       .smp_boot_secondary	= spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+       .cpu_die			= spear13xx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c
new file mode 100644
index 000000000000..2b44500bb718
--- /dev/null
+++ b/arch/arm/mach-spear/restart.c
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/plat-spear/restart.c
+ *
+ * SPEAr platform specific restart functions
+ *