diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:33:45 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:33:45 -0800 |
commit | 6c5096e5538b455bc3bea2b02588c380f070d8c6 (patch) | |
tree | a2d08974a0c6a6fd19dff90bd3ab1827c23a5764 /arch/arm/mach-omap2 | |
parent | bab588fcfb6335c767d811a8955979f5440328e0 (diff) | |
parent | f628e3d92465303792d52c98fb0c95bef558f936 (diff) |
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes from Arnd Bergmann:
"These updates are all for board specific code, including
- defconfig updates for shmobile, davinci, bcm2835, imx, omap and
tegra
- SD/MMC and I2C support on bcm2835 (Raspberry PI)
- minor updates for PXA
- shmobile updates to GPIO usage in board files
- More things in OMAP board files are moved over to device tree
probing
- Better support for audio devices on some OMAP platforms"
* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
ARM: imx_v4_v5_defconfig: Add VPU support
ARM: imx: configs: enable netfilter support
ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
ARM: shmobile: armadillo800eva: set clock rates before timer init
ARM: tegra: defconfig updates
ARM: shmobile: mackerel: Use gpio_request_one()
ARM: shmobile: kzm9g: Use gpio_request_one()
ARM: shmobile: bonito: Use gpio_request_one()
...
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r-- | arch/arm/mach-omap2/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 20 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 30 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-am3517crane.c | 59 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-apollon.c | 342 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-cm-t3517.c | 27 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-igep0020.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 41 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-omap3evm.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-overo.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 20 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-zoom-peripherals.c | 39 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap2/twl-common.c | 17 | ||||
-rw-r--r-- | arch/arm/mach-omap2/twl-common.h | 3 |
18 files changed, 234 insertions, 400 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index c3c033f283a9..22ad24e9496b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -188,12 +188,6 @@ config MACH_OMAP_H4 select OMAP_DEBUG_DEVICES select OMAP_PACKAGE_ZAF -config MACH_OMAP_APOLLON - bool "OMAP 2420 Apollon board" - depends on SOC_OMAP2420 - default y - select OMAP_PACKAGE_ZAC - config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on SOC_OMAP2430 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 65fb6fb38caf..ff528df70119 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -223,7 +223,6 @@ endif obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o -obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 15a3914ab492..ce812decfaca 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/omap-twl4030.h> #include <linux/usb/phy.h> #include <asm/mach-types.h> @@ -210,6 +211,19 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct omap_tw4030_pdata omap_twl4030_audio_data = { + .voice_connected = true, + .custom_routing = true, + + .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + + .has_mainmic = true, + .has_submic = true, + .has_hsmic = true, + .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, +}; + static int sdp3430_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -226,6 +240,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev, /* gpio + 15 is "sub_lcd_nRST" (output) */ gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); + omap_twl4030_audio_data.jack_detect = gpio + 2; + omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data); + return 0; } @@ -383,6 +400,9 @@ static int __init omap3430_i2c_init(void) sdp3430_twldata.vpll2->constraints.apply_uV = true; sdp3430_twldata.vpll2->constraints.name = "VDVI"; + sdp3430_twldata.audio->codec->hs_extmute = 1; + sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL; + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 508e2752b7de..35f3ad0cb7c7 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -24,8 +24,10 @@ #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/pwm.h> #include <linux/leds.h> #include <linux/leds_pwm.h> +#include <linux/pwm_backlight.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/usb/musb.h> @@ -257,10 +259,20 @@ static struct gpio_led_platform_data sdp4430_led_data = { .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), }; +static struct pwm_lookup sdp4430_pwm_lookup[] = { + PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "omap4::keypad"), + PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", NULL), + PWM_LOOKUP("twl-pwmled", 0, "leds_pwm", "omap4:green:chrg"), +}; + static struct led_pwm sdp4430_pwm_leds[] = { { + .name = "omap4::keypad", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, + { .name = "omap4:green:chrg", - .pwm_id = 1, .max_brightness = 255, .pwm_period_ns = 7812500, }, @@ -279,6 +291,20 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +static struct platform_pwm_backlight_data sdp4430_backlight_data = { + .max_brightness = 127, + .dft_brightness = 127, + .pwm_period_ns = 7812500, +}; + +static struct platform_device sdp4430_backlight_pwm = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = &sdp4430_backlight_data, + }, +}; + static int omap_prox_activate(struct device *dev) { gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); @@ -413,6 +439,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, + &sdp4430_backlight_pwm, &sdp4430_vbat, &sdp4430_dmic_codec, &sdp4430_abe_audio, @@ -709,6 +736,7 @@ static void __init omap_4430sdp_init(void) ARRAY_SIZE(sdp4430_spi_board_info)); } + pwm_add_table(sdp4430_pwm_lookup, ARRAY_SIZE(sdp4430_pwm_lookup)); status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 52cc2c597314..7d3358b2e593 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -20,12 +20,18 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/mfd/tps65910.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +#include "common-board-devices.h" +#include "board-flash.h" #include "am35xx-emac.h" #include "mux.h" @@ -36,6 +42,7 @@ #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -51,6 +58,54 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static struct mtd_partition crane_nand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct tps65910_board tps65910_pdata = { + .irq = 7 + OMAP_INTC_START, + .en_ck32k_xtal = true, +}; + +static struct i2c_board_info __initdata tps65910_board_info[] = { + { + I2C_BOARD_INFO("tps65910", 0x2d), + .platform_data = &tps65910_pdata, + }, +}; + +static void __init am3517_crane_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, tps65910_board_info, + ARRAY_SIZE(tps65910_board_info)); +} + static void __init am3517_crane_init(void) { int ret; @@ -58,6 +113,10 @@ static void __init am3517_crane_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); + board_nand_init(crane_nand_partitions, + ARRAY_SIZE(crane_nand_partitions), 0, + NAND_BUSWIDTH_16, NULL); + am3517_crane_i2c_init(); /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c deleted file mode 100644 index 3a6ca74709ab..000000000000 --- a/arch/arm/mach-omap2/board-apollon.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-apollon.c - * - * Copyright (C) 2005,2006 Samsung Electronics - * Author: Kyungmin Park <kyungmin.park@samsung.com> - * - * Modified from mach-omap/omap2/board-h4.c - * - * Code for apollon OMAP2 board. Should work on many OMAP2 systems where - * the bootloader passes the board-specific data to the kernel. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/onenand.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/smc91x.h> -#include <linux/gpio.h> -#include <linux/platform_data/leds-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" - -#include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> - -#include "mux.h" -#include "control.h" - -/* LED & Switch macros */ -#define LED0_GPIO13 13 -#define LED1_GPIO14 14 -#define LED2_GPIO15 15 -#define SW_ENTER_GPIO16 16 -#define SW_UP_GPIO17 17 -#define SW_DOWN_GPIO58 58 - -#define APOLLON_FLASH_CS 0 -#define APOLLON_ETH_CS 1 -#define APOLLON_ETHR_GPIO_IRQ 74 - -static struct mtd_partition apollon_partitions[] = { - { - .name = "X-Loader + U-Boot", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16M, - }, - { - .name = "filesystem00", - .offset = MTDPART_OFS_APPEND, - .size = SZ_32M, - }, - { - .name = "filesystem01", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct onenand_platform_data apollon_flash_data = { - .parts = apollon_partitions, - .nr_parts = ARRAY_SIZE(apollon_partitions), -}; - -static struct resource apollon_flash_resource[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device apollon_onenand_device = { - .name = "onenand-flash", - .id = -1, - .dev = { - .platform_data = &apollon_flash_data, - }, - .num_resources = ARRAY_SIZE(apollon_flash_resource), - .resource = apollon_flash_resource, -}; - -static void __init apollon_flash_init(void) -{ - unsigned long base; - - if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) { - printk(KERN_ERR "Cannot request OneNAND GPMC CS\n"); - return; - } - apollon_flash_resource[0].start = base; - apollon_flash_resource[0].end = base + SZ_128K - 1; -} - -static struct smc91x_platdata appolon_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource apollon_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device apollon_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &appolon_smc91x_info, - }, - .num_resources = ARRAY_SIZE(apollon_smc91x_resources), - .resource = apollon_smc91x_resources, -}; - -static struct omap_led_config apollon_led_config[] = { - { - .cdev = { - .name = "apollon:led0", - }, - .gpio = LED0_GPIO13, - }, - { - .cdev = { - .name = "apollon:led1", - }, - .gpio = LED1_GPIO14, - }, - { - .cdev = { - .name = "apollon:led2", - }, - .gpio = LED2_GPIO15, - }, -}; - -static struct omap_led_platform_data apollon_led_data = { - .nr_leds = ARRAY_SIZE(apollon_led_config), - .leds = apollon_led_config, -}; - -static struct platform_device apollon_led_device = { - .name = "omap-led", - .id = -1, - .dev = { - .platform_data = &apollon_led_data, - }, -}; - -static struct platform_device *apollon_devices[] __initdata = { - &apollon_onenand_device, - &apollon_smc91x_device, - &apollon_led_device, -}; - -static inline void __init apollon_init_smc91x(void) -{ - unsigned long base; - - unsigned int rate; - struct clk *gpmc_fck; - int eth_cs; - int err; - - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - - eth_cs = APOLLON_ETH_CS; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { - printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); - goto out; - } - apollon_smc91x_resources[0].start = base + 0x300; - apollon_smc91x_resources[0].end = base + 0x30f; - udelay(100); - - omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); - err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); - if (err) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - APOLLON_ETHR_GPIO_IRQ); - gpmc_cs_free(APOLLON_ETH_CS); - } -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); -} - -static struct panel_generic_dpi_data apollon_panel_data = { - .name = "apollon", -}; - -static struct omap_dss_device apollon_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &apollon_panel_data, -}; - -static struct omap_dss_device *apollon_dss_devices[] = { - &apollon_lcd_device, -}; - -static struct omap_dss_board_info apollon_dss_data = { - .num_devices = ARRAY_SIZE(apollon_dss_devices), - .devices = apollon_dss_devices, - .default_device = &apollon_lcd_device, -}; - -static struct gpio apollon_gpio_leds[] __initdata = { - { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ - { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ - { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ -}; - -static void __init apollon_led_init(void) -{ - omap_mux_init_signal("vlynq_clk.gpio_13", 0); - omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - - gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init omap_apollon_init(void) -{ - u32 v; - - omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); - - apollon_init_smc91x(); - apollon_led_init(); - apollon_flash_init(); - - /* REVISIT: where's the correct place */ - omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); - - /* LCD PWR_EN */ - omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - - /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */ - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ - apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); - apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); - platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - omap_display_init(&apollon_dss_data); -} - -MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = omap_apollon_init, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 10054e3c3482..af2bb219e214 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -723,7 +723,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); - omap_twl4030_audio_init("cm-t3x"); + omap_twl4030_audio_init("cm-t3x", NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 5e54f565a294..a66da808cc4a 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mmc/host.h> #include <linux/can/platform/ti_hecc.h> #include <asm/mach-types.h> @@ -46,6 +47,7 @@ #include "mux.h" #include "control.h" +#include "hsmmc.h" #include "common-board-devices.h" #include "am35xx-emac.h" #include "gpmc-nand.h" @@ -121,6 +123,26 @@ static void cm_t3517_init_hecc(void) static inline void cm_t3517_init_hecc(void) {} #endif +#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +static struct omap2_hsmmc_info cm_t3517_mmc[] = { + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 144, + .gpio_wp = 59, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; +#else +#define cm_t3517_mmc NULL +#endif + #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) @@ -271,6 +293,10 @@ static struct omap_board_mux board_mux[] __initdata = { /* CM-T3517 USB HUB nRESET */ OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */ + OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -286,6 +312,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_usbh(); cm_t3517_init_hecc(); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); + omap_hsmmc_init(cm_t3517_mmc); } MACHINE_START(CM_T3517, "Compulab CM-T3517") diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 4dadb0b7b808..53056c3b0836 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -629,7 +629,7 @@ static void __init devkit8000_init(void) board_nand_init(devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle"); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index c10738a067cd..bf92678a01d0 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -301,20 +301,20 @@ static struct omap2_hsmmc_info mmc[] = { static struct gpio_led igep_gpio_leds[] = { [0] = { - .name = "gpio-led:red:d0", - .default_trigger = "default-off" + .name = "omap3:red:user0", + .default_state = 0, }, [1] = { - .name = "gpio-led:green:d0", - .default_trigger = "default-off", + .name = "omap3:green:boot", + .default_state = 1, }, [2] = { - .name = "gpio-led:red:d1", - .default_trigger = "default-off", + .name = "omap3:red:user1", + .default_state = 0, }, [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", + .name = "omap3:green:user1", + .default_state = 0, .gpio = -EINVAL, /* gets replaced */ .active_low = 1, }, @@ -631,7 +631,7 @@ static void __init igep_init(void) igep_flash_init(); igep_leds_init(); - omap_twl4030_audio_init("igep2"); + omap_twl4030_audio_init("igep2", NULL); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70bc1fc808c8..c3558f93d42c 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -20,6 +20,8 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -56,6 +58,32 @@ #define NAND_CS 0 +static struct pwm_lookup pwm_lookup[] = { + /* LEDB -> PMU_STAT */ + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), +}; + +static struct led_pwm pwm_leds[] = { + { + .name = "beagleboard::pmu_stat", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, +}; + +static struct led_pwm_platform_data pwm_data = { + .num_leds = ARRAY_SIZE(pwm_leds), + .leds = pwm_leds, +}; + +static struct platform_device leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &pwm_data, + }, +}; + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -293,9 +321,6 @@ static int beagle_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -377,11 +402,6 @@ static struct gpio_led gpio_leds[] = { .default_trigger = "mmc0", .gpio = 149, }, - { - .name = "beagleboard::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, }; static struct gpio_led_platform_data gpio_led_info = { @@ -429,6 +449,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, &madc_hwmon, + &leds_pwm, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { @@ -526,7 +547,7 @@ static void __init omap3_beagle_init(void) board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle"); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure msecure is mux'd to be able to set the RTC. */ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); @@ -534,6 +555,8 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); + + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 8258a78c3dfb..48789e0bb915 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -746,7 +746,7 @@ static void __init omap3_evm_init(void) omap3evm_init_smsc911x(); omap3_evm_display_init(); omap3_evm_wl12xx_init(); - omap_twl4030_audio_init("omap3evm"); + omap_twl4030_audio_init("omap3evm", NULL); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1bcf39671c35..86bab51154ee 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -508,7 +508,7 @@ static void __init overo_init(void) overo_display_init(); overo_init_led(); overo_init_keys(); - omap_twl4030_audio_init("overo"); + omap_twl4030_audio_init("overo", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f3d075baebb6..c26d441ca4fb 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -162,30 +162,39 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) static struct lp5523_led_config rx51_lp5523_led_config[] = { { + .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, }, { + .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, }, { + .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, }, { + .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, }, { + .name = "lp5523:b", .chan_nr = 4, .led_current = 50, }, { + .name = "lp5523:g", .chan_nr = 5, .led_current = 50, }, { + .name = "lp5523:r", .chan_nr = 6, .led_current = 50, }, { + .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, }, { + .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, } @@ -1253,6 +1262,16 @@ static void __init rx51_init_lirc(void) } #endif +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; + +static void __init rx51_init_twl4030_hwmon(void) +{ + platform_device_register(&madc_hwmon); +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1272,5 +1291,6 @@ void __init rx51_peripherals_init(void) omap_hsmmc_init(mmc); rx51_charger_init(); + rx51_init_twl4030_hwmon(); } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index dc5498b1b3a7..cdc0c1021863 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c |