ARM: delete netx machine

After discussing with the subarch maintainers and Hilscher,
we concluded that the netx subarchitecture (Netx 100/500)
is no longer maintained or tested, and noone will miss it
if we delete it. So delete it.

There is a newer Netx 4000 architecture which we may see
included at some point, but this will be supported using
the standard multiplatform and devicetree mechanisms and is
easier to develop from scratch.

Cc: Michael Trensch <MTrensch@hilscher.com>
Acked-By: Robert Schwebel <r.schwebel@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 209 deletions

diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
deleted file mode 100644
index 9b558eb3070f..000000000000
--- a/arch/arm/mach-netx/nxdb500.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * arch/arm/mach-netx/nxdb500.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
-	.mode		= {
-		.name		= "QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 187617,
-		.left_margin	= 6,
-		.right_margin	= 26,
-		.upper_margin	= 0,
-		.lower_margin	= 6,
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		=  16,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
-	var->green.length = 5;
-	var->green.msb_right = 0;
-
-	return clcdfb_check(fb, var);
-}
-
-static int nxdb500_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned int val;
-
-	fb->fb.var.green.length = 5;
-	fb->fb.var.green.msb_right = 0;
-
-	/* enable asic control */
-	val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
-	writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
-	writel(3, NETX_SYSTEM_IOC_CR);
-
-	val = readl(NETX_PIO_OUTPIO);
-	writel(val | 1, NETX_PIO_OUTPIO);
-
-	val = readl(NETX_PIO_OEPIO);
-	writel(val | 1, NETX_PIO_OEPIO);
-	return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "netX",
-	.check		= nxdb500_check,
-	.decode		= clcdfb_decode,
-	.enable		= netx_clcd_enable,
-	.setup		= nxdb500_clcd_setup,
-	.mmap		= netx_clcd_mmap,
-	.remove		= netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
-	.xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
-	.name		= "netx-eth",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth0_platform_data,
-	}
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
-	.xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
-	.name		= "netx-eth",
-	.id		= 1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth1_platform_data,
-	}
-};
-
-static struct resource netx_uart0_resources[] = {
-	[0] = {
-		.start	= 0x00100A00,
-		.end	= 0x00100A3F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART0),
-		.end	= (NETX_IRQ_UART0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart0_device = {
-	.name		= "netx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(netx_uart0_resources),
-	.resource	= netx_uart0_resources,
-};
-
-static struct resource netx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00100A40,
-		.end	= 0x00100A7F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART1),
-		.end	= (NETX_IRQ_UART1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart1_device = {
-	.name		= "netx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(netx_uart1_resources),
-	.resource	= netx_uart1_resources,
-};
-
-static struct resource netx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00100A80,
-		.end	= 0x00100ABF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART2),
-		.end	= (NETX_IRQ_UART2),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart2_device = {
-	.name		= "netx-uart",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(netx_uart2_resources),
-	.resource	= netx_uart2_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&netx_eth0_device,
-	&netx_eth1_device,
-	&netx_uart0_device,
-	&netx_uart1_device,
-	&netx_uart2_device,
-};
-
-static void __init nxdb500_init(void)
-{
-	netx_fb_init(&clcd_data, &qvga);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDB500, "Hilscher nxdb500")
-	.atag_offset	= 0x100,
-	.map_io		= netx_map_io,
-	.init_irq	= netx_init_irq,
-	.init_time	= netx_timer_init,
-	.init_machine	= nxdb500_init,
-	.restart	= netx_restart,
-MACHINE_END