Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...

33 files changed, 279 insertions, 1991 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fea008123eb1..83afb80d38a8 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -4,6 +4,20 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
+config MACH_IXP4XX_OF
+	bool
+	prompt "Devce Tree IXP4xx boards"
+	default y
+	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select I2C
+	select I2C_IOP3XX
+	select PCI
+	select SERIAL_OF_PLATFORM
+	select TIMER_OF
+	select USE_OF
+	help
+	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
+
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
@@ -222,19 +236,6 @@ config IXP4XX_INDIRECT_PCI
 	  need to use the indirect method instead. If you don't know
 	  what you need, leave this option unselected.
 
-config IXP4XX_QMGR
-	tristate "IXP4xx Queue Manager support"
-	help
-	  This driver supports IXP4xx built-in hardware queue manager
-	  and is automatically selected by Ethernet and HSS drivers.
-
-config IXP4XX_NPE
-	tristate "IXP4xx Network Processor Engine support"
-	select FW_LOADER
-	help
-	  This driver supports IXP4xx built-in network coprocessors
-	  and is automatically selected by Ethernet and HSS drivers.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index f09994500a34..1fa4e6605782 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -6,6 +6,9 @@
 obj-pci-y	:=
 obj-pci-n	:=
 
+# Device tree platform
+obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
+
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
@@ -40,5 +43,3 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
-obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-obj-$(CONFIG_IXP4XX_NPE)	+= ixp4xx_npe.o
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 548c7d43ade6..9c834f0f4231 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -27,6 +27,8 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define AVILA_MAX_DEV	4
 #define LOFT_MAX_DEV	6
 #define IRQ_LINES	4
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 44cbbce6bda6..1981b33109cb 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -28,6 +28,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define AVILA_SDA_PIN	7
 #define AVILA_SCL_PIN	6
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 846e033c56fa..cc5f15679d29 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -22,41 +22,30 @@
 #include <linux/serial_core.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
-#include <linux/gpio/driver.h>
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/sched_clock.h>
+#include <linux/bitops.h>
+#include <linux/irqchip/irq-ixp4xx.h>
+#include <linux/platform_data/timer-ixp4xx.h>
 #include <mach/udc.h>
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <linux/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/exception.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*
- * The timer register doesn't allow to specify the two least significant bits of
- * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
- * the best value with the two least significant bits unset.
- */
-#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
-				       (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
-			(IXP4XX_OST_RELOAD_MASK + 1)
+#include "irqs.h"
 
-static void __init ixp4xx_clocksource_init(void);
-static void __init ixp4xx_clockevent_init(void);
-static struct clock_event_device clockevent_ixp4xx;
+#define IXP4XX_TIMER_FREQ 66666000
 
 /*************************************************************************
  * IXP4xx chipset I/O mapping
@@ -77,11 +66,6 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
-	}, {	/* Queue Manager */
-		.virtual	= (unsigned long)IXP4XX_QMGR_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
-		.length		= IXP4XX_QMGR_REGION_SIZE,
-		.type		= MT_DEVICE
 	},
 };
 
@@ -90,258 +74,23 @@ void __init ixp4xx_map_io(void)
   	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
 }
 
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-/*************************************************************************
- * IXP4xx chipset IRQ handling
- *
- * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
- *       (be it PCI or something else) configures that GPIO line
- *       as an IRQ.
- **************************************************************************/
-enum ixp4xx_irq_type {
-	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
-};
-
-/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
-static unsigned long long ixp4xx_irq_edge = 0;
-
-/*
- * IRQ -> GPIO mapping table
- */
-static signed char irq2gpio[32] = {
-	-1, -1, -1, -1, -1, -1,  0,  1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1,  2,  3,  4,  5,  6,
-	 7,  8,  9, 10, 11, 12, -1, -1,
-};
-
-static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
-	int irq;
-
-	for (irq = 0; irq < 32; irq++) {
-		if (irq2gpio[irq] == gpio)
-			return irq;
-	}
-	return -EINVAL;
-}
-
-static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	int line = irq2gpio[d->irq];
-	u32 int_style;
-	enum ixp4xx_irq_type irq_type;
-	volatile u32 *int_reg;
-
-	/*
-	 * Only for GPIO IRQs
-	 */
-	if (line < 0)
-		return -EINVAL;
-
-	switch (type){
-	case IRQ_TYPE_EDGE_BOTH:
-		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-		irq_type = IXP4XX_IRQ_LEVEL;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
-		irq_type = IXP4XX_IRQ_LEVEL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (irq_type == IXP4XX_IRQ_EDGE)
-		ixp4xx_irq_edge |= (1 << d->irq);
-	else
-		ixp4xx_irq_edge &= ~(1 << d->irq);
-
-	if (line >= 8) {	/* pins 8-15 */
-		line -= 8;
-		int_reg = IXP4XX_GPIO_GPIT2R;
-	} else {		/* pins 0-7 */
-		int_reg = IXP4XX_GPIO_GPIT1R;
-	}
-
-	/* Clear the style for the appropriate pin */
-	*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
-	    		(line * IXP4XX_GPIO_STYLE_SIZE));
-
-	*IXP4XX_GPIO_GPISR = (1 << line);
-
-	/* Set the new style */
-	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
-
-	/* Configure the line as an input */
-	gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN);
-
-	return 0;
-}
-
-static void ixp4xx_irq_mask(struct irq_data *d)
-{
-	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
-		*IXP4XX_ICMR2 &= ~(1 << (d->irq - 32));
-	else
-		*IXP4XX_ICMR &= ~(1 << d->irq);
-}
-
-static void ixp4xx_irq_ack(struct irq_data *d)
-{
-	int line = (d->irq < 32) ? irq2gpio[d->irq] : -1;
-
-	if (line >= 0)
-		*IXP4XX_GPIO_GPISR = (1 << line);
-}
-
-/*
- * Level triggered interrupts on GPIO lines can only be cleared when the
- * interrupt condition disappears.
- */
-static void ixp4xx_irq_unmask(struct irq_data *d)
-{
-	if (!(ixp4xx_irq_edge & (1 << d->irq)))
-		ixp4xx_irq_ack(d);
-
-	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
-		*IXP4XX_ICMR2 |= (1 << (d->irq - 32));
-	else
-		*IXP4XX_ICMR |= (1 << d->irq);
-}
-
-static struct irq_chip ixp4xx_irq_chip = {
-	.name		= "IXP4xx",
-	.irq_ack	= ixp4xx_irq_ack,
-	.irq_mask	= ixp4xx_irq_mask,
-	.irq_unmask	= ixp4xx_irq_unmask,
-	.irq_set_type	= ixp4xx_set_irq_type,
-};
-
 void __init ixp4xx_init_irq(void)
 {
-	int i = 0;
-
 	/*
 	 * ixp4xx does not implement the XScale PWRMODE register
 	 * so it must not call cpu_do_idle().
 	 */
 	cpu_idle_poll_ctrl(true);
 
-	/* Route all sources to IRQ instead of FIQ */
-	*IXP4XX_ICLR = 0x0;
-
-	/* Disable all interrupt */
-	*IXP4XX_ICMR = 0x0; 
-
-	if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
-		/* Route upper 32 sources to IRQ instead of FIQ */
-		*IXP4XX_ICLR2 = 0x00;
-
-		/* Disable upper 32 interrupts */
-		*IXP4XX_ICMR2 = 0x00;
-	}
-
-        /* Default to all level triggered */
-	for(i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
+	ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
+			(cpu_is_ixp46x() || cpu_is_ixp43x()));
 }
 
-
-/*************************************************************************
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp 
- * counter as a source of real clock ticks to account for missed jiffies.
- *************************************************************************/
-
-static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp4xx_timer_irq = {
-	.name		= "timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ixp4xx_timer_interrupt,
-	.dev_id		= &clockevent_ixp4xx,
-};
-
 void __init ixp4xx_timer_init(void)
 {
-	/* Reset/disable counter */
-	*IXP4XX_OSRT1 = 0;
-
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-	/* Reset time-stamp counter */
-	*IXP4XX_OSTS = 0;
-
-	/* Connect the interrupt handler and enable the interrupt */
-	setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-
-	ixp4xx_clocksource_init();
-	ixp4xx_clockevent_init();
+	return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
+				  IRQ_IXP4XX_TIMER1,
+				  IXP4XX_TIMER_FREQ);
 }
 
 static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
@@ -364,6 +113,24 @@ static struct resource ixp4xx_udc_resources[] = {
 	},
 };
 
+static struct resource ixp4xx_gpio_resource[] = {
+	{
+		.start = IXP4XX_GPIO_BASE_PHYS,
+		.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ixp4xx_gpio_device = {
+	.name           = "ixp4xx-gpio",
+	.id             = -1,
+	.dev = {
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+	.resource = ixp4xx_gpio_resource,
+	.num_resources  = ARRAY_SIZE(ixp4xx_gpio_resource),
+};
+
 /*
  * USB device controller. The IXP4xx uses the same controller as PXA25X,
  * so we just use the same device.
@@ -378,7 +145,61 @@ static struct platform_device ixp4xx_udc_device = {
 	},
 };
 
+static struct resource ixp4xx_npe_resources[] = {
+	{
+		.start = IXP4XX_NPEA_BASE_PHYS,
+		.end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IXP4XX_NPEB_BASE_PHYS,
+		.end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IXP4XX_NPEC_BASE_PHYS,
+		.end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+
+};
+
+static struct platform_device ixp4xx_npe_device = {
+	.name           = "ixp4xx-npe",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(ixp4xx_npe_resources),
+	.resource       = ixp4xx_npe_resources,
+};
+
+static struct resource ixp4xx_qmgr_resources[] = {
+	{
+		.start = IXP4XX_QMGR_BASE_PHYS,
+		.end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_IXP4XX_QM1,
+		.end = IRQ_IXP4XX_QM1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_IXP4XX_QM2,
+		.end = IRQ_IXP4XX_QM2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ixp4xx_qmgr_device = {
+	.name           = "ixp4xx-qmgr",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(ixp4xx_qmgr_resources),
+	.resource       = ixp4xx_qmgr_resources,
+};
+
 static struct platform_device *ixp4xx_devices[] __initdata = {
+	&ixp4xx_npe_device,
+	&ixp4xx_qmgr_device,
+	&ixp4xx_gpio_device,
 	&ixp4xx_udc_device,
 };
 
@@ -413,56 +234,12 @@ static struct platform_device *ixp46x_devices[] __initdata = {
 unsigned long ixp4xx_exp_bus_size;
 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
 
-static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-
-	return 0;
-}
-
-static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
-					int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-
-	return 0;
-}
-
-static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
-				  int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip ixp4xx_gpio_chip = {
-	.label			= "IXP4XX_GPIO_CHIP",
-	.direction_input	= ixp4xx_gpio_direction_input,
-	.direction_output	= ixp4xx_gpio_direction_output,
-	.get			= ixp4xx_gpio_get_value,
-	.set			= ixp4xx_gpio_set_value,
-	.to_irq			= ixp4xx_gpio_to_irq,
-	.base			= 0,
-	.ngpio			= 16,
-};
-
 void __init ixp4xx_sys_init(void)
 {
 	ixp4xx_exp_bus_size = SZ_16M;
 
 	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
 
-	gpiochip_add_data(&ixp4xx_gpio_chip, NULL);
-
 	if (cpu_is_ixp46x()) {
 		int region;
 
@@ -481,103 +258,8 @@ void __init ixp4xx_sys_init(void)
 			ixp4xx_exp_bus_size >> 20);
 }
 
-/*
- * sched_clock()
- */
-static u64 notrace ixp4xx_read_sched_clock(void)
-{
-	return *IXP4XX_OSTS;
-}
-
-/*
- * clocksource
- */
-
-static u64 ixp4xx_clocksource_read(struct clocksource *c)
-{
-	return *IXP4XX_OSTS;
-}
-
 unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
-static void __init ixp4xx_clocksource_init(void)
-{
-	sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
-
-	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
-			ixp4xx_clocksource_read);
-}
-
-/*
- * clockevents
- */
-static int ixp4xx_set_next_event(unsigned long evt,
-				 struct clock_event_device *unused)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-
-	*IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
-
-	return 0;
-}
-
-static int ixp4xx_shutdown(struct clock_event_device *evt)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
-
-	opts &= ~IXP4XX_OST_ENABLE;
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static int ixp4xx_set_oneshot(struct clock_event_device *evt)
-{
-	unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
-	unsigned long osrt = 0;
-
-	/* period set by 'set next_event' */
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static int ixp4xx_set_periodic(struct clock_event_device *evt)
-{
-	unsigned long opts = IXP4XX_OST_ENABLE;
-	unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
-
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static int ixp4xx_resume(struct clock_event_device *evt)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
-
-	opts |= IXP4XX_OST_ENABLE;
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static struct clock_event_device clockevent_ixp4xx = {
-	.name			= "ixp4xx timer1",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 200,
-	.set_state_shutdown	= ixp4xx_shutdown,
-	.set_state_periodic	= ixp4xx_set_periodic,
-	.set_state_oneshot	= ixp4xx_set_oneshot,
-	.tick_resume		= ixp4xx_resume,
-	.set_next_event		= ixp4xx_set_next_event,
-};
-
-static void __init ixp4xx_clockevent_init(void)
-{
-	clockevent_ixp4xx.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
-					0xf, 0xfffffffe);
-}
 
 void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
 {
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 5d14ce2aee6d..a16c35d2bb96 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -23,6 +23,8 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 #define SLOT0_DEVID	14
 #define SLOT1_DEVID	15
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 7e40fe70933b..7ca43ca2816d 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -25,6 +25,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
 #define COYOTE_IDE_BASE_VIRT	0xFFFE1000
 #define COYOTE_IDE_REGION_SIZE	0x1000
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 8dca76937723..6899023bd1b7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -22,6 +22,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		4
 #define IRQ_LINES	3
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 397190f3a8da..4d4c62fced71 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -35,6 +35,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
+#include "irqs.h"
+
 #define DSMG600_SDA_PIN		5
 #define DSMG600_SCL_PIN		4
 
@@ -268,9 +270,6 @@ static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
 
-	/* Make sure that GPIO14 and GPIO15 are not used as clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
 	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	dsmg600_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index fd4a8625b4ae..6c08bb9d9807 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -22,6 +22,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index f0a152e365b1..648932d8d7a8 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -29,6 +29,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define FSG_SDA_PIN		12
 #define FSG_SCL_PIN		13
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index d9d6cc089707..903c75330b76 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -27,6 +27,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init gateway7001_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 1be6faf6da9a..678e7dfff0e5 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -28,6 +28,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 static struct flash_platform_data gateway7001_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 551d114c9e14..1223d160448f 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -30,6 +30,8 @@
 #include <mach/hardware.h>
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 #define SLOT0_DEVID	0
 #define SLOT1_DEVID	1
 #define INTA		10 /* slot 1 has INTA and INTB crossed */
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 16a12994fb53..5dbdde8e2338 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -36,6 +36,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 /* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
    and operate as an SPI type interface.  The details of the interface
    are available on Kendin/Micrel's web site. */
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
deleted file mode 100644
index 79adf83e2c3d..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro  get_irqnr_preamble, base, tmp