diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-08 17:06:53 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-08 17:06:53 -0400 |
commit | 212fe84a6f215c39795a76517c1c02114d428681 (patch) | |
tree | 4692680312616d6a5c562f2d494c12d21b697237 /arch/arm/mach-imx | |
parent | 4a4743e840d06a5772be7c21110807165c5b3c9f (diff) | |
parent | 05301fe7de11dac87638f1728f8ee8b31bc1cf31 (diff) |
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"This time around, the cleanup branch contains mostly code removal. A
number of board files for at91, imx and msm have become obsolete
because of the DT conversion and are now ready to be removed. The
OMAP platform has traditionally had its own DMA engine abstraction and
as this is being phased out, a lot of the original code is now unused
and can be removed as well.
S3C24xx can be simplified now that the restart code is a proper device
driver.
Finally, a number of cleanups in shmobile are done to prepare for the
addition of new code in other branches"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91: Remove the support for the RSI EWS board
arm: mach-omap2: Convert pr_warning to pr_warn
ARM: OMAP: Remove unused pieces of legacy DMA API
ARM: at91: remove board file for Acme Systems Fox G20
ARM: orion5x: Convert pr_warning to pr_warn
ARM: S3C24XX: remove separate restart code
ARM: EXYNOS: Do not calculate boot address twice
ARM: sunxi: Remove sun4i reboot code from mach directory
ARM: imx: Remove mach-mxt_td60 board file
ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
ARM: shmobile: r8a7740: Clean up pm domain table
ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
ARM: shmobile: sh7372: Make domain_devices[] static __initdata
ARM: shmobile: mackerel: Make domain_devices[] static __initdata
clocksource: tcb_clksrc: sanitize IRQ request
ARM: at91/tclib: mask interruptions at shutdown and probe
ARM: at91/tclib: move initialization from alloc to probe
ARM: at91/tclib: prefer using of devm_* functions
ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
ARM: shmobile: r8a7791 is now called "R-Car M2-W"
...
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 103 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 6 | ||||
-rw-r--r-- | arch/arm/mach-imx/board-pcm038.h | 36 | ||||
-rw-r--r-- | arch/arm/mach-imx/common.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/cpuidle-imx6q.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-imx/eukrea-baseboards.h | 10 | ||||
-rw-r--r-- | arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 351 | ||||
-rw-r--r-- | arch/arm/mach-imx/iomux-imx31.c | 7 | ||||
-rw-r--r-- | arch/arm/mach-imx/iomux-v1.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/iomux-v3.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-cpuimx27.c | 321 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-mx1ads.c | 154 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-mxt_td60.c | 273 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-pcm038.c | 358 | ||||
-rw-r--r-- | arch/arm/mach-imx/pcm970-baseboard.c | 231 | ||||
-rw-r--r-- | arch/arm/mach-imx/platsmp.c | 10 |
16 files changed, 1 insertions, 1869 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index be9a51afe05a..4e9b4f63d42b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -108,17 +108,6 @@ config SOC_IMX35 if ARCH_MULTI_V4T comment "MX1 platforms:" -config MACH_MXLADS - bool - -config ARCH_MX1ADS - bool "MX1ADS platform" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select MACH_MXLADS - select SOC_IMX1 - help - Say Y here if you are using Motorola MX1ADS/MXLADS boards config MACH_SCB9328 bool "Synertronixx scb9328" @@ -223,86 +212,6 @@ config MACH_MX27ADS Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. -config MACH_PCM038 - bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for phyCORE-i.MX27 (aka pcm038) platform. This - includes specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_PCM038 - default MACH_PCM970_BASEBOARD - -config MACH_PCM970_BASEBOARD - bool "PHYTEC PCM970 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds board specific devices that can be found on Phytec's - PCM970 evaluation board. - -endchoice - -config MACH_CPUIMX27 - bool "Eukrea CPUIMX27 module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for Eukrea CPUIMX27 platform. This includes - specific configurations for the module and its peripherals. - -config MACH_EUKREA_CPUIMX27_USESDHC2 - bool "CPUIMX27 integrates SDHC2 module" - depends on MACH_CPUIMX27 - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds support for the internal SDHC2 used on CPUIMX27 - for wifi or eMMC. - -config MACH_EUKREA_CPUIMX27_USEUART4 - bool "CPUIMX27 integrates UART4 module" - depends on MACH_CPUIMX27 - help - This adds support for the internal UART4 used on CPUIMX27 - for bluetooth. - -choice - prompt "Baseboard" - depends on MACH_CPUIMX27 - default MACH_EUKREA_MBIMX27_BASEBOARD - -config MACH_EUKREA_MBIMX27_BASEBOARD - bool "Eukrea MBIMX27 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX27 evaluation board. - -endchoice - config MACH_MX27_3DS bool "MX27PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC @@ -359,18 +268,6 @@ config MACH_PCA100 Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. -config MACH_MXT_TD60 - bool "Maxtrack i-MXT TD60" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select SOC_IMX27 - help - Include support for i-MXT (aka td60) platform. This - includes specific configurations for the module and its peripherals. - config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 23c02932bf84..4147729775d2 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -41,7 +41,6 @@ obj-y += ssi-fiq-ksym.o endif # i.MX1 based machines -obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o @@ -56,14 +55,9 @@ obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o -obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o -obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o -obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o -obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o -obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o # i.MX31 based machines diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h deleted file mode 100644 index 6f371e35753d..000000000000 --- a/arch/arm/mach-imx/board-pcm038.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 22ba8973bcb9..1dabf435c592 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -98,11 +98,9 @@ void imx_set_cpu_arg(int cpu, u32 arg); void v7_secondary_startup(void); void imx_scu_map_io(void); void imx_smp_prepare(void); -void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} -static inline void imx_scu_standby_enable(void) {} #endif void imx_src_init(void); void imx_gpc_init(void); diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 10844d3bb926..aa935787b743 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -66,10 +66,6 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { int __init imx6q_cpuidle_init(void) { - /* Need to enable SCU standby for entering WAIT modes */ - if (!cpu_is_imx6sx()) - imx_scu_standby_enable(); - /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ imx6q_set_int_mem_clk_lpm(true); diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h index a21d3313f994..bb2c90d65914 100644 --- a/arch/arm/mach-imx/eukrea-baseboards.h +++ b/arch/arm/mach-imx/eukrea-baseboards.h @@ -27,23 +27,15 @@ * This CPU module needs a baseboard to work. After basic initializing * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() - * eukrea_cpuimx35_init() eukrea_cpuimx51_init() - * or eukrea_cpuimx51sd_init(). + * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init() * * This example here is for the development board. Refer * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 - * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 - * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 - * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd */ extern void eukrea_mbimxsd25_baseboard_init(void); -extern void eukrea_mbimx27_baseboard_init(void); extern void eukrea_mbimxsd35_baseboard_init(void); -extern void eukrea_mbimx51_baseboard_init(void); -extern void eukrea_mbimxsd51_baseboard_init(void); #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c deleted file mode 100644 index b2f08bfbbdd3..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/backlight.h> -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int eukrea_mbimx27_pins[] __initconst = { - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* UART4 */ -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* SPI1 */ - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI4 */ -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD | GPIO_PUEN, - PC18_PF_SSI4_TXD | GPIO_PUEN, - PC19_PF_SSI4_CLK, -#endif -}; - -static const uint32_t eukrea_mbimx27_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), -}; - -static const struct matrix_keymap_data -eukrea_mbimx27_keymap_data __initconst = { - .keymap = eukrea_mbimx27_keymap, - .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), -}; - -static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_PORTF | 16, - }, - { - .name = "led2", - .default_trigger = "none", - .active_low = 1, - .gpio = GPIO_PORTF | 19, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimx27_gpio_led_info __initconst = { - .leds = eukrea_mbimx27_gpio_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), -}; - -static struct imx_fb_videomode eukrea_mbimx27_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = 156000, - .hsync_len = 30, - .left_margin = 38, - .right_margin = 20, - .vsync_len = 3, - .upper_margin = 15, - .lower_margin = 4, - }, - .pcr = 0xFAD08B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = { - .mode = eukrea_mbimx27_modes, - .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimx27_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_PORTE | 5, 1); - else - gpio_direction_output(GPIO_PORTE | 5, 0); -} - -static struct generic_bl_info eukrea_mbimx27_bl_info = { - .name = "eukrea_mbimx27-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimx27_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimx27_bl_info, - }, -}; - -static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_PORTA | 25, 1); - else - gpio_direction_output(GPIO_PORTA | 25, 0); -} - -static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { - .set_power = eukrea_mbimx27_lcd_power_set, -}; - -static struct platform_device eukrea_mbimx27_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimx27_lcd_power_data, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define ADS7846_PENDOWN (GPIO_PORTD | 25) - -static void __maybe_unused ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - return; - } - gpio_direction_input(ADS7846_PENDOWN); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info __maybe_unused - eukrea_mbimx27_spi_board_info[] __initdata = { - [0] = { - .modalias = "ads7846", - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 1500000, - /* irq number is run-time assigned */ - .platform_data = &ads7846_config, - .mode = SPI_MODE_2, - }, -}; - -static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; - -static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { - .chipselect = eukrea_mbimx27_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), -}; - -static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .dat3_card_detect = 1, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { - .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, -}; - -/* - * system init for baseboard usage. Will be called by cpuimx27 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimx27_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, - ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); - - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - imx27_add_imx_uart3(&uart_pdata); -#endif - - imx27_add_imx_fb(&eukrea_mbimx27_fb_data); - imx27_add_mxc_mmc(0, &sdhc_pdata); - - i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, - ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - - imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ - || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /* ADS7846 Touchscreen controller init */ - mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); - ads7846_dev_init(); -#endif - - /* SPI_CS0 init */ - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); - eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); - spi_register_board_info(eukrea_mbimx27_spi_board_info, - ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); - - /* Leds configuration */ - mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT); - /* Backlight */ - mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTE | 5, "backlight"); - platform_device_register(&eukrea_mbimx27_bl_dev); - /* LCD Reset */ - mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTA | 25, "lcd_enable"); - platform_device_register(&eukrea_mbimx27_lcd_powerdev); - - imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - - gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 7c66805d2cc0..1657fe64cd0f 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -64,7 +64,6 @@ int mxc_iomux_mode(unsigned int pin_mode) return ret; } -EXPORT_SYMBOL(mxc_iomux_mode); /* * This function configures the pad value for a IOMUX pin. @@ -90,7 +89,6 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) spin_unlock(&gpio_mux_lock); } -EXPORT_SYMBOL(mxc_iomux_set_pad); /* * allocs a single pin: @@ -116,7 +114,6 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label) return 0; } -EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label) @@ -137,7 +134,6 @@ setup_error: mxc_iomux_release_multiple_pins(pin_list, i); return ret; } -EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); void mxc_iomux_release_pin(unsigned int pin) { @@ -146,7 +142,6 @@ void mxc_iomux_release_pin(unsigned int pin) if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); } -EXPORT_SYMBOL(mxc_iomux_release_pin); void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) { @@ -158,7 +153,6 @@ void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) p++; } } -EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); /* * This function enables/disables the general purpose function for a particular @@ -178,4 +172,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) __raw_writel(l, IOMUXGPR); spin_unlock(&gpio_mux_lock); } -EXPORT_SYMBOL(mxc_iomux_set_gpr); diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index 2b156d1d9e21..ecd543664644 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -153,7 +153,6 @@ int mxc_gpio_mode(int gpio_mode) return 0; } -EXPORT_SYMBOL(mxc_gpio_mode); static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) { @@ -178,7 +177,6 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, ret = imx_iomuxv1_setup_multiple(pin_list, count); return ret; } -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); int __init imx_iomuxv1_init(void __iomem *base, int numports) { diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index 9dae74bf47fc..d61f9606fc56 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -55,7 +55,6 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) return 0; } -EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) { @@ -71,7 +70,6 @@ int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) } return 0; } -EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); void mxc_iomux_v3_init(void __iomem *iomux_v3_base) { diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c deleted file mode 100644 index e6d4b9929571..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * Based on pcm038.c which is : - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int eukrea_cpuimx27_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART4 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* SDHC2 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -#endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - /* Quad UART's IRQ */ - GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN, -#endif - /* OTG */ - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PC9_PF_USBOTG_DATA0, - PC10_PF_USBOTG_DATA2, - PC11_PF_USBOTG_DATA1, - PC12_PF_USBOTG_DATA4, - PC13_PF_USBOTG_DATA3, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PE2_PF_USBOTG_DIR, - PE24_PF_USBOTG_CLK, - PE25_PF_USBOTG_DATA7, - /* USBH2 */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -static struct physmap_flash_data eukrea_cpuimx27_flash_data = { - .width = 2, -}; - -static struct resource eukrea_cpuimx27_flash_resource = { - .start = 0xc0000000, - .end = 0xc3ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device eukrea_cpuimx27_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &eukrea_cpuimx27_flash_data, - }, - .num_resources = 1, - .resource = &eukrea_cpuimx27_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -cpuimx27_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_cpuimx27_nor_mtd_device, -}; - -static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - } -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; -#endif - -static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = eukrea_cpuimx27_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = eukrea_cpuimx27_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx27_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1;< |