diff options
author | Alexander Shiyan <shc_work@mail.ru> | 2014-08-23 15:12:09 +0400 |
---|---|---|
committer | Shawn Guo <shawn.guo@freescale.com> | 2014-09-01 22:00:02 +0800 |
commit | 1ca7070d1d08e71692295ed06c6cb6331ecac3c8 (patch) | |
tree | ff3bd08c1aace4f90668a6ceb5e401318d64e099 /arch/arm/mach-imx | |
parent | 7c5deaf77526508709b320b76b0d41cec7274edc (diff) |
ARM: i.MX: Remove Phytec i.MX27 PCM038/PCM970 board files
pcm970-baseboard.c and mach-pcm038.c can be replaced with their
devicetree equivalents: imx27-phytec-phycore-rdk.dts and
imx27-phytec-phycore-som.dtsi respectively, so remove the board files.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 30 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/board-pcm038.h | 36 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-pcm038.c | 358 | ||||
-rw-r--r-- | arch/arm/mach-imx/pcm970-baseboard.c | 231 |
5 files changed, 0 insertions, 657 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e9a04590f729..62d645de8bf9 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -223,36 +223,6 @@ config MACH_MX27ADS Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. -config MACH_PCM038 - bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for phyCORE-i.MX27 (aka pcm038) platform. This - includes specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_PCM038 - default MACH_PCM970_BASEBOARD - -config MACH_PCM970_BASEBOARD - bool "PHYTEC PCM970 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds board specific devices that can be found on Phytec's - PCM970 evaluation board. - -endchoice - config MACH_MX27_3DS bool "MX27PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 30f3f5e9792a..cd30279e3692 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -56,8 +56,6 @@ obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o -obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o -obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h deleted file mode 100644 index 6f371e35753d..000000000000 --- a/arch/arm/mach-imx/board-pcm038.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c deleted file mode 100644 index ee862ad6b6fc..000000000000 --- a/arch/arm/mach-imx/mach-pcm038.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/platform_data/at24.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "board-pcm038.h" -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int pcm038_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* SPI1 */ - PD25_PF_CSPI1_RDY, - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI1 */ - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - /* SSI4 */ - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD, - PC18_PF_SSI4_TXD, - PC19_PF_SSI4_CLK, - /* USB host */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -/* - * Phytec's PCM038 comes with 2MiB battery buffered SRAM, - * 16 bit width - */ - -static struct platdata_mtd_ram pcm038_sram_data = { - .bankwidth = 2, -}; - -static struct resource pcm038_sram_resource = { - .start = MX27_CS1_BASE_ADDR, - .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_sram_mtd_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &pcm038_sram_data, - }, - .num_resources = 1, - .resource = &pcm038_sram_resource, -}; - -/* - * Phytec's phyCORE-i.MX27 comes with 32MiB flash, - * 16 bit width - */ -static struct physmap_flash_data pcm038_flash_data = { - .width = 2, -}; - -static struct resource pcm038_flash_resource = { - .start = 0xc0000000, - .end = 0xc1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm038_flash_data, - }, - .num_resources = 1, - .resource = &pcm038_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -pcm038_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &pcm038_nor_mtd_device, - &pcm038_sram_mtd_device, -}; - -/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and - * setup other stuffs to access the sram. */ -static void __init pcm038_init_sram(void) -{ - __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); - __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); - __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); -} - -static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info pcm038_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("lm75", 0x4a), - } -}; - -static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; - -static const struct spi_imx_master pcm038_spi0_data __initconst = { - .chipselect = pcm038_spi_cs, - .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), -}; - -static struct regulator_consumer_supply sdhc1_consumers[] = { - { - .dev_name = "imx21-mmc.1", - .supply = "sdhc_vcc", - }, -}; - -static struct regulator_init_data sdhc1_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), - .consumer_supplies = sdhc1_consumers, -}; - -static struct regulator_consumer_supply cam_consumers[] = { - { - .dev_name = NULL, - .supply = "imx_cam_vcc", - }, -}; - -static struct regulator_init_data cam_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(cam_consumers), - .consumer_supplies = cam_consumers, -}; - -static struct mc13xxx_regulator_init_data pcm038_regulators[] = { - { - .id = MC13783_REG_VCAM, - .init_data = &cam_data, - }, { - .id = MC13783_REG_VMMC1, - .init_data = &sdhc1_data, - }, -}; - -static struct mc13xxx_platform_data pcm038_pmic = { - .regulators = { - .regulators = pcm038_regulators, - .num_regulators = ARRAY_SIZE(pcm038_regulators), - }, - .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, -}; - -static struct spi_board_info pcm038_spi_board_info[] __initdata = { - { - .modalias = "mc13783", - /* irq number is run-time assigned */ - .max_speed_hz = 300000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &pcm038_pmic, - .mode = SPI_CS_HIGH, - } -}; - -static int pcm038_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = pcm038_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void __init pcm038_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), - "PCM038"); - - pcm038_init_sram(); - - imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); - - mxc_gpio_mode(PE16_AF_OWIRE); - imx27_add_mxc_nand(&pcm038_nand_board_info); - - /* only the i2c master 1 is used on this CPU card */ - i2c_register_board_info(1, pcm038_i2c_devices, - ARRAY_SIZE(pcm038_i2c_devices)); - - imx27_add_imx_i2c(1, &pcm038_i2c1_data); - - /* PE18 for user-LED D40 */ - mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); - - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - - /* MC13783 IRQ */ - mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); - - imx27_add_spi_imx0(&pcm038_spi0_data); - pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23)); - spi_register_board_info(pcm038_spi_board_info, - ARRAY_SIZE(pcm038_spi_board_info)); - - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - - imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); - -#ifdef CONFIG_MACH_PCM970_BASEBOARD - pcm970_baseboard_init(); -#endif -} - -static void __init pcm038_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(PCM038, "phyCORE-i.MX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = pcm038_timer_init, - .init_machine = pcm038_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c deleted file mode 100644 index 51c608234089..000000000000 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/can/platform/sja1000.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int pcm970_pins[] __initconst = { - /* SDHC */ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA24_PF_REV, - PA25_PF_CLS, - PA26_PF_PS, - PA27_PF_SPL_SPR, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* - * it seems the data line misses a pullup, so we must enable - * the internal pullup as a local workaround - */ - PD17_PF_I2C_DATA | GPIO_PUEN, - PD18_PF_I2C_CLK, - /* Camera */ - PB10_PF_CSI_D0, - PB11_PF_CSI_D1, - PB12_PF_CSI_D2, - PB13_PF_CSI_D3, - PB14_PF_CSI_D4, - PB15_PF_CSI_MCLK, - PB16_PF_CSI_PIXCLK, - PB17_PF_CSI_D5, - PB18_PF_CSI_D6, - PB19_PF_CSI_D7, - PB20_PF_CSI_VSYNC, - PB21_PF_CSI_HSYNC, -}; - -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) -{ - int ret; - - ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); - if (ret) - return ret; - - ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) { - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); - return ret; - } - - gpio_direction_input(GPIO_PORTC + 28); - - return 0; -} - -static void pcm970_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); - gpio_free(GPIO_PORTC + 28); -} - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .get_ro = pcm970_sdhc2_get_ro, - .init = pcm970_sdhc2_init, - .exit = pcm970_sdhc2_exit, -}; - -static struct imx_fb_videomode pcm970_modes[] = { - { - .mode = { - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 188679, /* in ps (5.3MHz) */ - .hsync_len = 7, - .left_margin = 5, - .right_margin = 16, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 9, - }, - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xF00080C0, - .bpp = 16, - }, { - .mode = { - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - }, - /* - * - HSYNC active low (1 << 22) - * - VSYNC active low (1 << 23) - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19), - .bpp = 32, - }, -}; - -static const struct imx_fb_platform_data pcm038_fb_data __initconst = { - .mode = pcm970_modes, - .num_modes = ARRAY_SIZE(pcm970_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static struct resource pcm970_sja1000_resources[] = { - { - .start = MX27_CS4_BASE_ADDR, - .end = MX27_CS4_BASE_ADDR + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct sja1000_platform_data pcm970_sja1000_platform_data = { - .osc_freq = 16000000, - .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, - .cdr = CDR_CBP, -}; - -static struct platform_device pcm970_sja1000 = { - .name = "sja1000_platform", - .dev = { - .platform_data = &pcm970_sja1000_platform_data, - }, - .resource = pcm970_sja1000_resources, - .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), -}; - -/* - * system init for baseboard usage. Will be called by pcm038 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init pcm970_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), - "PCM970"); - - imx27_add_imx_fb(&pcm038_fb_data); - mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); - imx27_add_mxc_mmc(1, &sdhc_pdata); - pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19)); - pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19)); - platform_device_register(&pcm970_sja1000); -} |