Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 277 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 000000000000..ba689fbd0e41
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,277 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	memory@b0000000 {
+		device_type = "memory";
+		reg = <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 0>; /* PEN */
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Make DA9053 regulator functional */
+				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+				/* FEC Power enable */
+				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+				/* FEC RST */
+				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 0>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};