Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 142 insertions, 7 deletions

diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 47c8c26012e4..2b6d489dae69 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -22,10 +22,10 @@
 		bits-per-pixel = <16>;  /* non-standard but required */
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
-			timing0: 640x480 {
+			timing0: 800x480 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
-				vactive = <640>;
+				vactive = <480>;
 				hback-porch = <96>;
 				hfront-porch = <96>;
 				vback-porch = <20>;
@@ -38,20 +38,24 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
 
 		user-key {
 			label = "user";
-			gpios = <&gpio6 13 0>;
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <276>; /* BTN_EXTRA */
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		user {
 			label = "Heartbeat";
-			gpios = <&gpio6 14 0>;
+			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -59,25 +63,34 @@
 
 &cspi1 {
 	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
 	status = "okay";
 };
 
 &cspi2 {
 	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>,
-			<&gpio2 17 1>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>,
+		   <&gpio2 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
 	status = "okay";
 };
 
 &fb {
 	display = <&display>;
 	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
 	status = "okay";
 };
 
 &i2c1 {
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	rtc@68 {
@@ -87,5 +100,127 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 };
+
+&iomuxc {
+	imx27-apf27dev {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi1_cs: cspi1csgrp {
+			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+		};
+
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi2_cs: cspi2csgrp {
+			fsl,pins = <
+				MX27_PAD_CSI_D5__GPIO2_17 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_pwm: pwmgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__PWMO 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+			>;
+		};
+
+		pinctrl_sdhc2_cd: sdhc2cdgrp {
+			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+		};
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm>;
+};