Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt patches for 5.9-rc1.

  Nothing really magic/major in here, just lots of little changes and
  updates:

   - clean up language usages in USB core and some drivers

   - Thunderbolt driver updates and additions

   - USB Gadget driver updates

   - dwc3 driver updates (like always...)

   - build with "W=1" warning fixups

   - mtu3 driver updates

   - usb-serial driver updates and device ids

   - typec additions and updates for new hardware

   - xhci debug code updates for future platforms

   - cdns3 driver updates

   - lots of other minor driver updates and fixes and cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
  usb: common: usb-conn-gpio: Register charger
  usb: mtu3: simplify mtu3_req_complete()
  usb: mtu3: clear dual mode of u3port when disable device
  usb: mtu3: use MTU3_EP_WEDGE flag
  usb: mtu3: remove useless member @busy in mtu3_ep struct
  usb: mtu3: remove repeated error log
  usb: mtu3: add ->udc_set_speed()
  usb: mtu3: introduce a funtion to check maximum speed
  usb: mtu3: clear interrupts status when disable interrupts
  usb: mtu3: reinitialize CSR registers
  usb: mtu3: fix macro for maximum number of packets
  usb: mtu3: remove unnecessary pointer checks
  usb: xhci: Fix ASMedia ASM1142 DMA addressing
  usb: xhci: define IDs for various ASMedia host controllers
  usb: musb: convert to devm_platform_ioremap_resource_byname
  usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
  usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
  usb: dwc3: convert to devm_platform_ioremap_resource_byname
  usb: cdns3: convert to devm_platform_ioremap_resource_byname
  usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
  ...

9 files changed, 113 insertions, 32 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index 82e80de78dd0..dd565c378b40 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -178,11 +178,18 @@ KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
 Description:	When new NVM image is written to the non-active NVM
 		area (through non_activeX NVMem device), the
-		authentication procedure is started by writing 1 to
-		this file. If everything goes well, the device is
+		authentication procedure is started by writing to
+		this file.
+		If everything goes well, the device is
 		restarted with the new NVM firmware. If the image
 		verification fails an error code is returned instead.
 
+		This file will accept writing values "1" or "2"
+		- Writing "1" will flush the image to the storage
+		area and authenticate the image in one action.
+		- Writing "2" will run some basic validation on the image
+		and flush it to the storage area.
+
 		When read holds status of the last authentication
 		operation if an error occurred during the process. This
 		is directly the status value from the DMA configuration
@@ -236,3 +243,49 @@ KernelVersion:	4.15
 Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/device
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Retimer device identifier read from the hardware.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	When new NVM image is written to the non-active NVM
+		area (through non_activeX NVMem device), the
+		authentication procedure is started by writing 1 to
+		this file. If everything goes well, the device is
+		restarted with the new NVM firmware. If the image
+		verification fails an error code is returned instead.
+
+		When read holds status of the last authentication
+		operation if an error occurred during the process.
+		Format: %x.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Holds retimer NVM version number. Format: %x.%x, major.minor.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Retimer vendor identifier read from the hardware.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mario Limonciello <mario.limonciello@dell.com>
+Description:	For supported devices, automatically authenticate the new Thunderbolt
+		image when the device is disconnected from the host system.
+
+		This file will accept writing values "1" or "2"
+		- Writing "1" will flush the image to the storage
+		area and prepare the device for authentication on disconnect.
+		- Writing "2" will run some basic validation on the image
+		and flush it to the storage area.
diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst
index 10c4f0ce2ad0..613cb24c76c7 100644
--- a/Documentation/admin-guide/thunderbolt.rst
+++ b/Documentation/admin-guide/thunderbolt.rst
@@ -173,8 +173,8 @@ following ``udev`` rule::
 
   ACTION=="add", SUBSYSTEM=="thunderbolt", ATTRS{iommu_dma_protection}=="1", ATTR{authorized}=="0", ATTR{authorized}="1"
 
-Upgrading NVM on Thunderbolt device or host
--------------------------------------------
+Upgrading NVM on Thunderbolt device, host or retimer
+----------------------------------------------------
 Since most of the functionality is handled in firmware running on a
 host controller or a device, it is important that the firmware can be
 upgraded to the latest where possible bugs in it have been fixed.
@@ -185,9 +185,10 @@ for some machines:
 
   `Thunderbolt Updates <https://thunderbolttechnology.net/updates>`_
 
-Before you upgrade firmware on a device or host, please make sure it is a
-suitable upgrade. Failing to do that may render the device (or host) in a
-state where it cannot be used properly anymore without special tools!
+Before you upgrade firmware on a device, host or retimer, please make
+sure it is a suitable upgrade. Failing to do that may render the device
+in a state where it cannot be used properly anymore without special
+tools!
 
 Host NVM upgrade on Apple Macs is not supported.
 
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
index 63e63af3bf59..c9f52b97cef1 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -4,7 +4,7 @@ Broadcom USB Device Controller (BDC)
 Required properties:
 
 - compatible: must be one of:
-                "brcm,bdc-v0.16"
+                "brcm,bdc-udc-v2"
                 "brcm,bdc"
 - reg: the base register address and length
 - interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@ On Broadcom STB platforms, these properties are required:
 Example:
 
         bdc@f0b02000 {
-                compatible = "brcm,bdc-v0.16";
+                compatible = "brcm,bdc-udc-v2";
                 reg = <0xf0b02000 0xfc4>;
                 interrupts = <0x0 0x60 0x0>;
                 phys = <&usbphy_0 0x0>;
diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
index a81b0b1a2226..2d61166ea5cf 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ4770 USB PHY devicetree bindings
+title: Ingenic SoCs USB PHY devicetree bindings
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
 
 properties:
   $nodename:
@@ -16,6 +17,9 @@ properties:
   compatible:
     enum:
       - ingenic,jz4770-phy
+      - ingenic,jz4780-phy
+      - ingenic,x1000-phy
+      - ingenic,x1830-phy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
index f127535feb0b..804b9b4f6654 100644
--- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
@@ -11,22 +11,36 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - const: "ti,keystone-dwc3"
-      - const: "ti,am654-dwc3"
+    items:
+      - enum:
+        - ti,keystone-dwc3
+        - ti,am654-dwc3
 
   reg:
     maxItems: 1
-    description: Address and length of the register set for the USB subsystem on
-      the SOC.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
 
   interrupts:
     maxItems: 1
-    description: The irq number of this device that is used to interrupt the MPU.
-
 
   clocks:
-    description: Clock ID for USB functional clock.
+    minItems: 1
+    maxItems: 2
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
 
   power-domains:
     description: Should contain a phandle to a PM domain provider node
@@ -42,33 +56,42 @@ properties:
 
   phy-names:
     items:
-      - const: "usb3-phy"
+      - const: usb3-phy
+
+  dma-coherent: true
 
-  dwc3:
+  dma-ranges: true
+
+patternProperties:
+  "usb@[a-f0-9]+$":
+    type: object
     description: This is the node representing the DWC3 controller instance
       Documentation/devicetree/bindings/usb/dwc3.txt
 
 required:
   - compatible
   - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
   - interrupts
-  - clocks
+
+additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    usb: usb@2680000 {
+    dwc3@2680000 {
       compatible = "ti,keystone-dwc3";
       #address-cells = <1>;
       #size-cells = <1>;
       reg = <0x2680000 0x10000>;
       clocks = <&clkusb>;
-      clock-names = "usb";
       interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
       ranges;
 
-      dwc3@2690000 {
+      usb@2690000 {
         compatible = "synopsys,dwc3";
         reg = <0x2690000 0x70000>;
         interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/driver-api/usb/URB.rst b/Documentation/driver-api/usb/URB.rst
index 61a54da9fce9..1e4abc896a0d 100644
--- a/Documentation/driver-api/usb/URB.rst
+++ b/Documentation/driver-api/usb/URB.rst
@@ -240,7 +240,7 @@ How to do isochronous (ISO) transfers?
 ======================================
 
 Besides the fields present on a bulk transfer, for ISO, you also
-also have to set ``urb->interval`` to say how often to make transfers; it's
+have to set ``urb->interval`` to say how often to make transfers; it's
 often one per frame (which is once every microframe for highspeed devices).
 The actual interval used will be a power of two that's no bigger than what
 you specify. You can use the :c:func:`usb_fill_int_urb` macro to fill
diff --git a/Documentation/usb/gadget_hid.rst b/Documentation/usb/gadget_hid.rst
index 098d563040cc..e623416de4f1 100644
--- a/Documentation/usb/gadget_hid.rst
+++ b/Documentation/usb/gadget_hid.rst
@@ -11,7 +11,7 @@ and HID reports can be sent/received through I/O on the
 /dev/hidgX character devices.
 
 For more details about HID, see the developer page on
-http://www.usb.org/developers/hidpage/
+https://www.usb.org/developers/hidpage/
 
 Configuration
 =============
diff --git a/Documentation/usb/gadget_multi.rst b/Documentation/usb/gadget_multi.rst
index 9806b55af301..3a22c1b2f39e 100644
--- a/Documentation/usb/gadget_multi.rst
+++ b/Documentation/usb/gadget_multi.rst
@@ -142,7 +142,7 @@ Footnotes
 =========
 
 [1] Remote Network Driver Interface Specification,
-[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+[[https://msdn.microsoft.com/en-us/library/ee484414.aspx]].
 
 [2] Communications Device Class Abstract Control Model, spec for this
 and other USB classes can be found at
@@ -150,9 +150,9 @@ and other USB classes can be found at
 
 [3] CDC Ethernet Control Model.
 
-[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
+[4] [[https://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
 
-[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
+[5] [[https://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
 
 [6] To put it in some other nice words, Windows failed to respond to
 any user input.
@@ -160,6 +160,6 @@ any user input.
 [7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
 useful.
 
-[8] http://www.nirsoft.net/utils/usb_devices_view.html
+[8] https://www.nirsoft.net/utils/usb_devices_view.html
 
-[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]
+[9] [[https://msdn.microsoft.com/en-us/library/ff570620.aspx]]
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index 4ffa715b0ae8..c569ac6bec58 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -1,5 +1,5 @@
 ; Based on template INF file found at
-;    <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+;    <https://msdn.microsoft.com/en-us/library/ff570620.aspx>
 ; which was:
 ;    Copyright (c) Microsoft Corporation
 ; and released under the MLPL as found at: