diff options
author | Maxime Ripard <mripard@kernel.org> | 2019-10-22 18:08:06 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2019-11-04 16:34:49 +0100 |
commit | e3dcb725a95af2ab71bcd64626b0d071239abffb (patch) | |
tree | ff608348a020ba5dbd05f9526ac3f6e8796c517a /Documentation | |
parent | 26f6a7524dd3366eff8cb0e733a856e8d84c6f68 (diff) |
pinctrl: Convert Allwinner Pin Controller to a schema
The Allwinner SoCs have a pin controller supported in Linux, with a
matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20191022160806.42971-1-mripard@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 243 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 164 |
2 files changed, 243 insertions, 164 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml new file mode 100644 index 000000000000..cd0503b6fe36 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Pin Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#gpio-cells": + const: 3 + description: + GPIO consumers must use three arguments, first the number of the + bank, then the pin number inside that bank, and finally the GPIO + flags. + + "#interrupt-cells": + const: 3 + description: + Interrupts consumers must use three arguments, first the number + of the bank, then the pin number inside that bank, and finally + the interrupts flags. + + compatible: + enum: + - allwinner,sun4i-a10-pinctrl + - allwinner,sun5i-a10s-pinctrl + - allwinner,sun5i-a13-pinctrl + - allwinner,sun6i-a31-pinctrl + - allwinner,sun6i-a31-r-pinctrl + - allwinner,sun6i-a31s-pinctrl + - allwinner,sun7i-a20-pinctrl + - allwinner,sun8i-a23-pinctrl + - allwinner,sun8i-a23-r-pinctrl + - allwinner,sun8i-a33-pinctrl + - allwinner,sun8i-a83t-pinctrl + - allwinner,sun8i-a83t-r-pinctrl + - allwinner,sun8i-h3-pinctrl + - allwinner,sun8i-h3-r-pinctrl + - allwinner,sun8i-r40-pinctrl + - allwinner,sun8i-v3-pinctrl + - allwinner,sun8i-v3s-pinctrl + - allwinner,sun9i-a80-pinctrl + - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun50i-a64-pinctrl + - allwinner,sun50i-a64-r-pinctrl + - allwinner,sun50i-h5-pinctrl + - allwinner,sun50i-h6-pinctrl + - allwinner,sun50i-h6-r-pinctrl + - allwinner,suniv-f1c100s-pinctrl + - nextthing,gr8-pinctrl + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 5 + description: + One interrupt per external interrupt bank supported on the + controller, sorted by bank number ascending order. + + clocks: + items: + - description: Bus Clock + - description: High Frequency Oscillator + - description: Low Frequency Oscillator + + clock-names: + items: + - const: apb + - const: hosc + - const: losc + + resets: + maxItems: 1 + + gpio-controller: true + interrupt-controller: true + gpio-line-names: true + + input-debounce: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 5 + description: + Debouncing periods in microseconds, one period per interrupt + bank found in the controller + +patternProperties: + # It's pretty scary, but the basic idea is that: + # - One node name can start with either s- or r- for PRCM nodes, + # - Then, the name itself can be any repetition of <string>- (to + # accomodate with nodes like uart4-rts-cts-pins), where each + # string can be either starting with 'p' but in a string longer + # than 3, or something that doesn't start with 'p', + # - Then, the bank name is optional and will be between pa and pg, + # pl or pm. Some pins groups that have several options will have + # the pin numbers then, + # - Finally, the name will end with either -pin or pins. + + "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$": + type: object + + properties: + pins: true + function: true + bias-disable: true + bias-pull-up: true + bias-pull-down: true + + drive-strength: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 10, 20, 30, 40 ] + + required: + - pins + - function + + additionalProperties: false + + "^vcc-p[a-hlm]-supply$": + description: + Power supplies for pin banks. + +required: + - "#gpio-cells" + - "#interrupt-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - gpio-controller + - interrupt-controller + +allOf: + # FIXME: We should have the pin bank supplies here, but not a lot of + # boards are defining it at the moment so it would generate a lot of + # warnings. + + - if: + properties: + compatible: + enum: + - allwinner,sun9i-a80-pinctrl + + then: + properties: + interrupts: + minItems: 5 + maxItems: 5 + + else: + if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-pinctrl + - allwinner,sun6i-a31s-pinctrl + - allwinner,sun50i-h6-pinctrl + + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + + else: + if: + properties: + compatible: + enum: + - allwinner,sun8i-a23-pinctrl + - allwinner,sun8i-a83t-pinctrl + - allwinner,sun50i-a64-pinctrl + - allwinner,sun50i-h5-pinctrl + - allwinner,suniv-f1c100s-pinctrl + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + + else: + if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-r-pinctrl + - allwinner,sun8i-a33-pinctrl + - allwinner,sun8i-h3-pinctrl + - allwinner,sun8i-v3-pinctrl + - allwinner,sun8i-v3s-pinctrl + - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun50i-h6-r-pinctrl + + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + else: + properties: + interrupts: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun5i-ccu.h> + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun5i-a13-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + uart1_pe_pins: uart1-pe-pins { + pins = "PE10", "PE11"; + function = "uart1"; + }; + + uart1_pg_pins: uart1-pg-pins { + pins = "PG3", "PG4"; + function = "uart1"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt deleted file mode 100644 index 328585c6da58..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ /dev/null @@ -1,164 +0,0 @@ -* Allwinner A1X Pin Controller - -The pins controlled by sunXi pin controller are organized in banks, -each bank has 32 pins. Each pin has 7 multiplexing functions, with -the first two functions being GPIO in and out. The configuration on -the pins includes drive strength and pull-up. - -Required properties: -- compatible: Should be one of the following (depending on your SoC): - "allwinner,sun4i-a10-pinctrl" - "allwinner,sun5i-a10s-pinctrl" - "allwinner,sun5i-a13-pinctrl" - "allwinner,sun6i-a31-pinctrl" - "allwinner,sun6i-a31s-pinctrl" - "allwinner,sun6i-a31-r-pinctrl" - "allwinner,sun7i-a20-pinctrl" - "allwinner,sun8i-a23-pinctrl" - "allwinner,sun8i-a23-r-pinctrl" - "allwinner,sun8i-a33-pinctrl" - "allwinner,sun9i-a80-pinctrl" - "allwinner,sun9i-a80-r-pinctrl" - "allwinner,sun8i-a83t-pinctrl" - "allwinner,sun8i-a83t-r-pinctrl" - "allwinner,sun8i-h3-pinctrl" - "allwinner,sun8i-h3-r-pinctrl" - "allwinner,sun8i-r40-pinctrl" - "allwinner,sun8i-v3-pinctrl" - "allwinner,sun8i-v3s-pinctrl" - "allwinner,sun50i-a64-pinctrl" - "allwinner,sun50i-a64-r-pinctrl" - "allwinner,sun50i-h5-pinctrl" - "allwinner,sun50i-h6-pinctrl" - "allwinner,sun50i-h6-r-pinctrl" - "allwinner,suniv-f1c100s-pinctrl" - "nextthing,gr8-pinctrl" - -- reg: Should contain the register physical address and length for the - pin controller. - -- clocks: phandle to the clocks feeding the pin controller: - - "apb": the gated APB parent clock - - "hosc": the high frequency oscillator in the system - - "losc": the low frequency oscillator in the system - -Note: For backward compatibility reasons, the hosc and losc clocks are only -required if you need to use the optional input-debounce property. Any new -device tree should set them. - -Each pin bank, depending on the SoC, can have an associated regulator: - -- vcc-pa-supply: for the A10, A20, A31, A31s, A80 and R40 SoCs -- vcc-pb-supply: for the A31, A31s, A80 and V3s SoCs -- vcc-pc-supply: for the A10, A20, A31, A31s, A64, A80, H5, R40 and V3s SoCs -- vcc-pd-supply: for the A23, A31, A31s, A64, A80, A83t, H3, H5 and R40 SoCs -- vcc-pe-supply: for the A10, A20, A31, A31s, A64, A80, R40 and V3s SoCs -- vcc-pf-supply: for the A10, A20, A31, A31s, A80, R40 and V3s SoCs -- vcc-pg-supply: for the A10, A20, A31, A31s, A64, A80, H3, H5, R40 and V3s SoCs -- vcc-ph-supply: for the A31, A31s and A80 SoCs -- vcc-pl-supply: for the r-pinctrl of the A64, A80 and A83t SoCs -- vcc-pm-supply: for the r-pinctrl of the A31, A31s and A80 SoCs - -Optional properties: - - input-debounce: Array of debouncing periods in microseconds. One period per - irq bank found in the controller. 0 if no setup required. - - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices. - -A pinctrl node should contain at least one subnodes representing the -pinctrl groups available on the machine. Each subnode will list the -pins it needs, and how they should be configured, with regard to muxer -configuration, drive strength and pullups. If one of these options is -not set, its actual value will be unspecified. - -Allwinner A1X Pin Controller supports the generic pin multiplexing and -configuration bindings. For details on each properties, you can refer to - ./pinctrl-bindings.txt. - -Required sub-node properties: - - pins - - function - -Optional sub-node properties: - - bias-disable - - bias-pull-up - - bias-pull-down - - drive-strength - -*** Deprecated pin configuration and multiplexing binding - -Required subnode-properties: - -- allwinner,pins: List of strings containing the pin name. -- allwinner,function: Function to mux the pins listed above to. - -Optional subnode-properties: -- allwinner,drive: Integer. Represents the current sent to the pin - 0: 10 mA - 1: 20 mA - 2: 30 mA - 3: 40 mA -- allwinner,pull: Integer. - 0: No resistor - 1: Pull-up resistor - 2: Pull-down resistor - -Examples: - -pio: pinctrl@1c20800 { - compatible = "allwinner,sun5i-a13-pinctrl"; - reg = <0x01c20800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -}; - - -GPIO and interrupt controller ------------------------------ - -This hardware also acts as a GPIO controller and an interrupt -controller. - -Consumers that would want to refer to one or the other (or both) -should provide through the usual *-gpios and interrupts properties a -cell with 3 arguments, first the number of the bank, then the pin -inside that bank, and finally the flags for the GPIO/interrupts. - -Example: - -xio: gpio@38 { - compatible = "nxp,pcf8574a"; - reg = <0x38>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&pio>; - interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; -}; - -reg_usb1_vbus: usb1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; -}; |