diff options
author | Jishnu Prakash <jprakash@codeaurora.org> | 2020-05-28 22:24:24 +0530 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2020-06-14 11:49:18 +0100 |
commit | d1492bbd470280c687e6677a355f923435bdb3ac (patch) | |
tree | 690b4b09916975663a52e50867201d8997528662 /Documentation | |
parent | 5a471662b5d92b5ff79478fee27a6d63ca4e71c9 (diff) |
iio: adc: Add PMIC7 ADC bindings
Add documentation for PMIC7 ADC peripheral.
For the PMIC7-type PMICs, ADC peripheral is present in HW for the
following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b.
Of these, only the ADC peripheral on PMK8350 is exposed directly to SW.
If SW needs to communicate with ADCs on other PMICs, it specifies the
PMIC to PMK8350 through the newly added SID register and communication
between PMK8350 ADC and other PMIC ADCs is carried out through
PBS(Programmable Boot Sequence) at the firmware level.
In addition, add definitions for ADC channels and virtual channel
definitions (combination of ADC channel number and PMIC SID number)
per PMIC, to be used by ADC clients for PMIC7.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml | 38 |
1 files changed, 32 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index de8d243f01c2..e6263b617941 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -13,7 +13,7 @@ maintainers: description: | SPMI PMIC voltage ADC (VADC) provides interface to clients to read voltage. The VADC is a 15-bit sigma-delta ADC. - SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read voltage. The VADC is a 16-bit sigma-delta ADC. properties: @@ -28,6 +28,7 @@ properties: - qcom,spmi-vadc - qcom,spmi-adc5 - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 reg: description: VADC base address in the SPMI PMIC register map @@ -70,6 +71,8 @@ patternProperties: description: | ADC channel number. See include/dt-bindings/iio/qcom,spmi-vadc.h + For PMIC7 ADC, the channel numbers are specified separately per PMIC + in the PMIC-specific files in include/dt-bindings/iio/. label: $ref: /schemas/types.yaml#/definitions/string @@ -113,11 +116,11 @@ patternProperties: channel calibration. If property is not found, channel will be calibrated with 0.625V and 1.25V reference channels, also known as absolute calibration. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - if this property is specified VADC will use the VDD reference (1.875V) - and GND for channel calibration. If property is not found, channel - will be calibrated with 0V and 1.25V reference channels, also known - as absolute calibration. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and + "qcom,spmi-adc-rev2", if this property is specified VADC will use + the VDD reference (1.875V) and GND for channel calibration. If + property is not found, channel will be calibrated with 0V and 1.25V + reference channels, also known as absolute calibration. type: boolean qcom,hw-settle-time: @@ -208,6 +211,29 @@ allOf: enum: [ 1, 2, 4, 8, 16 ] default: 1 + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc7 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 85, 340, 1360 ] + default: 1360 + + qcom,hw-settle-time: + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, + 8000, 16000, 32000, 64000, 128000 ] + default: 15 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + examples: - | spmi_bus { |