Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Mere overlapping changes in the conflicts here.

Signed-off-by: David S. Miller <davem@davemloft.net>

72 files changed, 210 insertions, 134 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
index c65a80574869..401d202f478b 100644
--- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
+++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/lifecycle_state
+What:		/sys/bus/platform/devices/MLNXBF04:00/lifecycle_state
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -10,7 +10,7 @@ Description:
 		  GA Non-Secured - Non-Secure chip and not able to change state
 		  RMA - Return Merchandise Authorization
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/post_reset_wdog
+What:		/sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -19,7 +19,7 @@ Description:
 		to reboot the chip and recover it to the old state if the new
 		boot partition fails.
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/reset_action
+What:		/sys/bus/platform/devices/MLNXBF04:00/reset_action
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -30,7 +30,7 @@ Description:
 		  emmc - boot from the onchip eMMC
 		  emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/second_reset_action
+What:		/sys/bus/platform/devices/MLNXBF04:00/second_reset_action
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -44,7 +44,7 @@ Description:
 		  swap_emmc - swap the primary / secondary boot partition
 		  none - cancel the action
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/secure_boot_fuse_state
+What:		/sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst
index 594095b54b29..c00f9f11e3f3 100644
--- a/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -144,7 +144,7 @@ journal_crypt:algorithm(:key)	(the key is optional)
 	Encrypt the journal using given algorithm to make sure that the
 	attacker can't read the journal. You can use a block cipher here
 	(such as "cbc(aes)") or a stream cipher (for example "chacha20",
-	"salsa20", "ctr(aes)" or "ecb(arc4)").
+	"salsa20" or "ctr(aes)").
 
 	The journal contains history of last writes to the block device,
 	an attacker reading the journal could see the last sector nubmers
diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
index 4872fb6d2952..ec62fcc8eece 100644
--- a/Documentation/admin-guide/device-mapper/index.rst
+++ b/Documentation/admin-guide/device-mapper/index.rst
@@ -8,6 +8,7 @@ Device Mapper
     cache-policies
     cache
     delay
+    dm-clone
     dm-crypt
     dm-dust
     dm-flakey
diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
index 059ddcbe769d..9bc93f0ce0c9 100644
--- a/Documentation/admin-guide/ext4.rst
+++ b/Documentation/admin-guide/ext4.rst
@@ -181,14 +181,17 @@ When mounting an ext4 filesystem, the following option are accepted:
         system after its metadata has been committed to the journal.
 
   commit=nrsec	(*)
-        Ext4 can be told to sync all its data and metadata every 'nrsec'
-        seconds. The default value is 5 seconds.  This means that if you lose
-        your power, you will lose as much as the latest 5 seconds of work (your
-        filesystem will not be damaged though, thanks to the journaling).  This
-        default value (or any low value) will hurt performance, but it's good
-        for data-safety.  Setting it to 0 will have the same effect as leaving
-        it at the default (5 seconds).  Setting it to very large values will
-        improve performance.
+        This setting limits the maximum age of the running transaction to
+        'nrsec' seconds.  The default value is 5 seconds.  This means that if
+        you lose your power, you will lose as much as the latest 5 seconds of
+        metadata changes (your filesystem will not be damaged though, thanks
+        to the journaling). This default value (or any low value) will hurt
+        performance, but it's good for data-safety.  Setting it to 0 will have
+        the same effect as leaving it at the default (5 seconds).  Setting it
+        to very large values will improve performance.  Note that due to
+        delayed allocation even older data can be lost on power failure since
+        writeback of those data begins only after time set in
+        /proc/sys/vm/dirty_expire_centisecs.
 
   barrier=<0|1(*)>, barrier(*), nobarrier
         This enables/disables the use of write barriers in the jbd code.
diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst
index fb5b39f73059..ad911be5b5e9 100644
--- a/Documentation/admin-guide/xfs.rst
+++ b/Documentation/admin-guide/xfs.rst
@@ -253,7 +253,7 @@ The following sysctls are available for the XFS filesystem:
 	pool.
 
   fs.xfs.speculative_prealloc_lifetime
-		(Units: seconds   Min: 1  Default: 300  Max: 86400)
+	(Units: seconds   Min: 1  Default: 300  Max: 86400)
 	The interval at which the background scanning for inodes
 	with unused speculative preallocation runs. The scan
 	removes unused preallocation from clean inodes and releases
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index ecdfdc9d4b03..61ae13c44f91 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -203,12 +203,12 @@ Test Module
 Kselftest tests the kernel from userspace.  Sometimes things need
 testing from within the kernel, one method of doing this is to create a
 test module.  We can tie the module into the kselftest framework by
-using a shell script test runner.  ``kselftest_module.sh`` is designed
+using a shell script test runner.  ``kselftest/module.sh`` is designed
 to facilitate this process.  There is also a header file provided to
 assist writing kernel modules that are for use with kselftest:
 
 - ``tools/testing/kselftest/kselftest_module.h``
-- ``tools/testing/kselftest/kselftest_module.sh``
+- ``tools/testing/kselftest/kselftest/module.sh``
 
 How to use
 ----------
@@ -247,7 +247,7 @@ A bare bones test module might look like this:
 
    #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-   #include "../tools/testing/selftests/kselftest_module.h"
+   #include "../tools/testing/selftests/kselftest/module.h"
 
    KSTM_MODULE_GLOBALS();
 
@@ -276,7 +276,7 @@ Example test script
 
     #!/bin/bash
     # SPDX-License-Identifier: GPL-2.0+
-    $(dirname $0)/../kselftest_module.sh "foo" test_foo
+    $(dirname $0)/../kselftest/module.sh "foo" test_foo
 
 
 Test Harness
diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst
index 26ffb46bdf99..c60d760a0eed 100644
--- a/Documentation/dev-tools/kunit/index.rst
+++ b/Documentation/dev-tools/kunit/index.rst
@@ -9,6 +9,7 @@ KUnit - Unit Testing for the Linux Kernel
 
 	start
 	usage
+	kunit-tool
 	api/index
 	faq
 
diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst
new file mode 100644
index 000000000000..50d46394e97e
--- /dev/null
+++ b/Documentation/dev-tools/kunit/kunit-tool.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+kunit_tool How-To
+=================
+
+What is kunit_tool?
+===================
+
+kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building
+the Linux kernel as UML (`User Mode Linux
+<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing
+the test results and displaying them in a user friendly manner.
+
+What is a kunitconfig?
+======================
+
+It's just a defconfig that kunit_tool looks for in the base directory.
+kunit_tool uses it to generate a .config as you might expect. In addition, it
+verifies that the generated .config contains the CONFIG options in the
+kunitconfig; the reason it does this is so that it is easy to be sure that a
+CONFIG that enables a test actually ends up in the .config.
+
+How do I use kunit_tool?
+========================
+
+If a kunitconfig is present at the root directory, all you have to do is:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run
+
+However, you most likely want to use it with the following options:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`
+
+- ``--timeout`` sets a maximum amount of time to allow tests to run.
+- ``--jobs`` sets the number of threads to use to build the kernel.
+
+If you just want to use the defconfig that ships with the kernel, you can
+append the ``--defconfig`` flag as well:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` --defconfig
+
+.. note::
+	This command is particularly helpful for getting started because it
+	just works. No kunitconfig needs to be present.
+
+For a list of all the flags supported by kunit_tool, you can run:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --help
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
index aeeddfafeea2..9d6db892c41c 100644
--- a/Documentation/dev-tools/kunit/start.rst
+++ b/Documentation/dev-tools/kunit/start.rst
@@ -19,11 +19,14 @@ The wrapper can be run with:
 
 .. code-block:: bash
 
-   ./tools/testing/kunit/kunit.py run
+	./tools/testing/kunit/kunit.py run --defconfig
+
+For more information on this wrapper (also called kunit_tool) checkout the
+:doc:`kunit-tool` page.
 
 Creating a kunitconfig
 ======================
-The Python script is a thin wrapper around Kbuild as such, it needs to be
+The Python script is a thin wrapper around Kbuild. As such, it needs to be
 configured with a ``kunitconfig`` file. This file essentially contains the
 regular Kernel config, with the specific test targets as well.
 
@@ -59,8 +62,8 @@ If everything worked correctly, you should see the following:
 followed by a list of tests that are run. All of them should be passing.
 
 .. note::
-   Because it is building a lot of sources for the first time, the ``Building
-   kunit kernel`` step may take a while.
+	Because it is building a lot of sources for the first time, the
+	``Building KUnit kernel`` step may take a while.
 
 Writing your first test
 =======================
@@ -159,7 +162,7 @@ Now you can run the test:
 
 .. code-block:: bash
 
-	./tools/testing/kunit/kunit.py
+	./tools/testing/kunit/kunit.py run
 
 You should see the following failure:
 
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index c6e69634e274..b9a065ab681e 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -16,7 +16,7 @@ Organization of this document
 =============================
 
 This document is organized into two main sections: Testing and Isolating
-Behavior. The first covers what a unit test is and how to use KUnit to write
+Behavior. The first covers what unit tests are and how to use KUnit to write
 them. The second covers how to use KUnit to isolate code and make it possible
 to unit test code that was otherwise un-unit-testable.
 
@@ -174,13 +174,13 @@ Test Suites
 ~~~~~~~~~~~
 
 Now obviously one unit test isn't very helpful; the power comes from having
-many test cases covering all of your behaviors. Consequently it is common to
-have many *similar* tests; in order to reduce duplication in these closely
-related tests most unit testing frameworks provide the concept of a *test
-suite*, in KUnit we call it a *test suite*; all it is is just a collection of
-test cases for a unit of code with a set up function that gets invoked before
-every test cases and then a tear down function that gets invoked after every
-test case completes.
+many test cases covering all of a unit's behaviors. Consequently it is common
+to have many *similar* tests; in order to reduce duplication in these closely
+related tests most unit testing frameworks - including KUnit - provide the
+concept of a *test suite*. A *test suite* is just a collection of test cases
+for a unit of code with a set up function that gets invoked before every test
+case and then a tear down function that gets invoked after every test case
+completes.
 
 Example:
 
@@ -211,7 +211,7 @@ KUnit test framework.
 .. note::
    A test case will only be run if it is associated with a test suite.
 
-For a more information on these types of things see the :doc:`api/test`.
+For more information on these types of things see the :doc:`api/test`.
 
 Isolating Behavior
 ==================
@@ -338,7 +338,7 @@ We can easily test this code by *faking out* the underlying EEPROM:
 		return count;
 	}
 
-	ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count)
+	ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count)
 	{
 		struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent);
 
@@ -454,7 +454,7 @@ KUnit on non-UML architectures
 By default KUnit uses UML as a way to provide dependencies for code under test.
 Under most circumstances KUnit's usage of UML should be treated as an
 implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code, or test
+are instances where being able to run architecture specific code or test
 against real hardware is desirable. For these reasons KUnit supports running on
 other architectures.
 
@@ -557,7 +557,7 @@ run your tests on your hardware setup just by compiling for your architecture.
 .. important::
    Always prefer tests that run on UML to tests that only run under a particular
    architecture, and always prefer tests that run under QEMU or another easy
-   (and monitarily free) to obtain software environment to a specific piece of
+   (and monetarily free) to obtain software environment to a specific piece of
    hardware.
 
 Nevertheless, there are still valid reasons to write an architecture or hardware
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 8a1e38a1d7ab..cffe8bb0bad1 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -8,7 +8,7 @@ title: Allwinner platforms device tree bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   $nodename:
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindi