Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

20 files changed, 320 insertions, 624 deletions

diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 42e7f030cb16..284ced7a228f 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -107,8 +107,8 @@
 !Finclude/net/cfg80211.h key_params
 !Finclude/net/cfg80211.h survey_info_flags
 !Finclude/net/cfg80211.h survey_info
-!Finclude/net/cfg80211.h beacon_parameters
-!Finclude/net/cfg80211.h plink_actions
+!Finclude/net/cfg80211.h cfg80211_beacon_data
+!Finclude/net/cfg80211.h cfg80211_ap_settings
 !Finclude/net/cfg80211.h station_parameters
 !Finclude/net/cfg80211.h station_info_flags
 !Finclude/net/cfg80211.h rate_info_flags
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 6ddd0286a9b7..ecfdf756d10f 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -24,6 +24,8 @@ Required properties:
 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
 - no_bd_ram		: Must be 0 or 1
+- dual_emac		: Specifies Switch to act as Dual EMAC
+- dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 2152b0e7237d..3210540f8bd3 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -179,7 +179,7 @@ Code  Seq#(hex)	Include File		Comments
 'V'	C0	media/davinci/vpfe_capture.h	conflict!
 'V'	C0	media/si4713.h		conflict!
 'W'	00-1F	linux/watchdog.h	conflict!
-'W'	00-1F	linux/wanrouter.h	conflict!
+'W'	00-1F	linux/wanrouter.h	conflict!		(pre 3.9)
 'W'	00-3F	sound/asound.h		conflict!
 'X'	all	fs/xfs/xfs_fs.h		conflict!
 		and fs/xfs/linux-2.6/xfs_ioctl32.h
diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt
index 82761a31d64d..76d80a64bbe1 100644
--- a/Documentation/magic-number.txt
+++ b/Documentation/magic-number.txt
@@ -122,7 +122,7 @@ SLAB_C_MAGIC          0x4f17a36d  kmem_cache        mm/slab.c
 COW_MAGIC             0x4f4f4f4d  cow_header_v1     arch/um/drivers/ubd_user.c
 I810_CARD_MAGIC       0x5072696E  i810_card         sound/oss/i810_audio.c
 TRIDENT_CARD_MAGIC    0x5072696E  trident_card      sound/oss/trident.c
-ROUTER_MAGIC          0x524d4157  wan_device        include/linux/wanrouter.h
+ROUTER_MAGIC          0x524d4157  wan_device        [in wanrouter.h pre 3.9]
 SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
 SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
 GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 2cc3c7733a2f..258d9b92c36f 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -52,8 +52,6 @@ de4x5.txt
 	- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
 decnet.txt
 	- info on using the DECnet networking layer in Linux.
-depca.txt
-	- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
 dl2k.txt
 	- README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko).
 dm9000.txt
@@ -72,8 +70,6 @@ e1000e.txt
 	- README for the Intel Gigabit Ethernet Driver (e1000e).
 eql.txt
 	- serial IP load balancing
-ewrk3.txt
-	- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
 fib_trie.txt
 	- Level Compressed Trie (LC-trie) notes: a structure for routing.
 filter.txt
@@ -126,8 +122,6 @@ ltpc.txt
 	- the Apple or Farallon LocalTalk PC card driver
 mac80211-injection.txt
 	- HOWTO use packet injection with mac80211
-multicast.txt
-	- Behaviour of cards under Multicast
 multiqueue.txt
 	- HOWTO for multiqueue network device support.
 netconsole.txt
diff --git a/Documentation/networking/DLINK.txt b/Documentation/networking/DLINK.txt
deleted file mode 100644
index 55d24433d151..000000000000
--- a/Documentation/networking/DLINK.txt
+++ /dev/null
@@ -1,203 +0,0 @@
-Released 1994-06-13
-
-
-	CONTENTS:
-
-	1. Introduction.
-	2. License.
-	3. Files in this release.
-	4. Installation.
-	5. Problems and tuning.
-	6. Using the drivers with earlier releases.
-	7. Acknowledgments.
-
-
-	1. INTRODUCTION.
-
-	This is a set of Ethernet drivers for the D-Link DE-600/DE-620
-	pocket adapters, for the parallel port on a Linux based machine.
-	Some adapter "clones" will also work.  Xircom is _not_ a clone...
-	These drivers _can_ be used as loadable modules,
-	and were developed for use on Linux 1.1.13 and above.
-	For use on Linux 1.0.X, or earlier releases, see below.
-
-	I have used these drivers for NFS, ftp, telnet and X-clients on
-	remote machines. Transmissions with ftp seems to work as
-	good as can be expected (i.e. > 80k bytes/sec) from a
-	parallel port...:-)  Receive speeds will be about 60-80% of this.
-	Depending on your machine, somewhat higher speeds can be achieved.
-
-	All comments/fixes to Bjorn Ekwall (bj0rn@blox.se).
-
-
-	2. LICENSE.
-
-	This program is free software; you can redistribute it
-	and/or modify it under the terms of the GNU General Public
-	License as published by the Free Software Foundation; either
-	version 2, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be
-	useful, but WITHOUT ANY WARRANTY; without even the implied
-	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-	PURPOSE. See the GNU General Public License for more
-	details.
-
-	You should have received a copy of the GNU General Public
-	License along with this program; if not, write to the Free
-	Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
-	02139, USA.
-
-
-	3. FILES IN THIS RELEASE.
-
-	README.DLINK  This file.
-	de600.c       The Source (may it be with You :-) for the DE-600
-	de620.c       ditto for the DE-620
-	de620.h       Macros for de620.c
-
-	If you are upgrading from the d-link tar release, there will
-	also be a "dlink-patches" file that will patch Linux 1.1.18:
-		linux/drivers/net/Makefile
-		linux/drivers/net/CONFIG
-		linux/drivers/net/MODULES
-		linux/drivers/net/Space.c
-		linux/config.in
-	Apply the patch by:
-	"cd /usr/src; patch -p0 < linux/drivers/net/dlink-patches"
-	The old source, "linux/drivers/net/d_link.c", can be removed.
-
-
-	4. INSTALLATION.
-
-	o Get the latest net binaries, according to current net.wisdom.
-
-	o Read the NET-2 and Ethernet HOWTOs and modify your setup.
-
-	o If your parallel port has a strange address or irq,
-	  modify "linux/drivers/net/CONFIG" accordingly, or adjust
-	  the parameters in the "tuning" section in the sources.
-
-	If you are going to use the drivers as loadable modules, do _not_
-	enable them while doing "make config", but instead make sure that
-	the drivers are included in "linux/drivers/net/MODULES".
-
-	If you are _not_ going to use the driver(s) as loadable modules,
-	but instead have them included in the kernel, remember to enable
-	the drivers while doing "make config".
-
-	o To include networking and DE600/DE620 support in your kernel:
-	  # cd /linux
-	  (as modules:)
-	  #  make config (answer yes on CONFIG_NET and CONFIG_INET)
-	  (else included in the kernel:)
-	  #  make config (answer yes on CONFIG _NET, _INET and _DE600 or _DE620)
-	  # make clean
-	  # make zImage (or whatever magic you usually do)
-
-	o I use lilo to boot multiple kernels, so that I at least
-	  can have one working kernel :-). If you do too, append
-	  these lines to /etc/lilo/config:
-
-		image = /linux/zImage
-		label = newlinux
-		root = /dev/hda2 (or whatever YOU have...)
-
-	  # /etc/lilo/install
-
-	o Do "sync" and reboot the new kernel with a D-Link
-	  DE-600/DE-620 pocket adapter connected.
-
-	o The adapter can be configured with ifconfig eth?
-	  where the actual number is decided by the kernel
-	  when the drivers are initialized.
-
-
-	5. "PROBLEMS" AND TUNING,
-
-	o If you see error messages from the driver, and if the traffic
-	  stops on the adapter, try to do "ifconfig" and "route" once
-	  more, just as in "rc.inet1".  This should take care of most
-	  problems, including effects from power loss, or adapters that
-	  aren't connected to the printer port in some way or another.
-	  You can somewhat change the behaviour by enabling/disabling
-	  the macro  SHUTDOWN_WHEN_LOST  in the "tuning" section.
-	  For the DE-600 there is another macro, CHECK_LOST_DE600,
-	  that you might want to read about in the "tuning" section.
-
-	o Some machines have trouble handling the parallel port and
-	  the adapter at high speed. If you experience problems:
-
-	  DE-600:
-	  - The adapter is not recognized at boot, i.e. an Ethernet
-	    address of 00:80:c8:... is not shown, try to add another
-	      "; SLOW_DOWN_IO"
-	    at DE600_SLOW_DOWN in the "tuning" section. As a last resort,
-	    uncomment: "#define REALLY_SLOW_IO" (see <asm/io.h> for hints).
-
-	  - You experience "timeout" messages: first try to add another
-	      "; SLOW_DOWN_IO"
-	    at DE600_SLOW_DOWN in the "tuning" section, _then_ try to
-	    increase the value (original value: 5) at
-	    "if (tickssofar < 5)" near line 422.
-
-	  DE-620:
-	  - Your parallel port might be "sluggish".  To cater for
-	    this, there are the macros LOWSPEED and READ_DELAY/WRITE_DELAY
-	    in the "tuning" section. Your first step should be to enable
-	    LOWSPEED, and after that you can "tune" the XXX_DELAY values.
-
-	o If the adapter _is_ recognized at boot but you get messages
-	  about "Network Unreachable", then the problem is probably
-	  _not_ with the driver.  Check your net configuration instead
-	  (ifconfig and route) in "rc.inet1".
-
-	o There is some rudimentary support for debugging, look at
-	  the source. Use "-DDE600_DEBUG=3" or "-DDE620_DEBUG=3"
-	  when compiling, or include it in "linux/drivers/net/CONFIG".
-	  IF YOU HAVE PROBLEMS YOU CAN'T SOLVE: PLEASE COMPILE THE DRIVER
-	  WITH DEBUGGING ENABLED, AND SEND ME THE RESULTING OUTPUT!
-
-
-	6. USING THE DRIVERS WITH EARLIER RELEASES.
-
-	The later 1.1.X releases of the Linux kernel include some
-	changes in the networking layer (a.k.a. NET3). This affects
-	these drivers in a few places.  The hints that follow are
-	_not_ tested by me, since I don't have the disk space to keep
-	all releases on-line.
-	Known needed changes to date:
-	- release patchfile: some patches will fail, but they should
-	  be easy to apply "by hand", since they are trivial.
-	  (Space.c: d_link_init() is now called de600_probe())
-	- de600.c: change  "mark_bh(NET_BH)" to  "mark_bh(INET_BH)".
-	- de620.c: (maybe) change the code around "netif_rx(skb);" to be
-		   similar to the code around "dev_rint(...)" in de600.c
-
-
-	7. ACKNOWLEDGMENTS.
-
-	These drivers wouldn't have been done without the base
-	(and support) from Ross Biro, and D-Link Systems Inc.
-	The driver relies upon GPL-ed source from D-Link Systems Inc.
-	and from Russel Nelson at Crynwr Software <nelson@crynwr.com>.
-
-	Additional input also from:
-	Donald Becker <becker@super.org>, Alan Cox <A.Cox@swansea.ac.uk>
-	and Fred N. van Kempen <waltje@uWalt.NL.Mugnet.ORG>
-
-	DE-600 alpha release primary victim^H^H^H^H^H^Htester:
-	- Erik Proper <erikp@cs.kun.nl>.
-	Good input also from several users, most notably
-	- Mark Burton <markb@ordern.demon.co.uk>.
-
-	DE-620 alpha release victims^H^H^H^H^H^H^Htesters:
-	- J. Joshua Kopper <kopper@rtsg.mot.com>
-	- Olav Kvittem <Olav.Kvittem@uninett.no>
-	- Germano Caronni <caronni@nessie.cs.id.ethz.ch>
-	- Jeremy Fitzhardinge <jeremy@suite.sw.oz.au>
-
-
-	Happy hacking!
-
-	Bjorn Ekwall == bj0rn@blox.se
diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic
index e7fb2c6023bc..2ae3b64983ab 100644
--- a/Documentation/networking/LICENSE.qlcnic
+++ b/Documentation/networking/LICENSE.qlcnic
@@ -1,4 +1,4 @@
-Copyright (c) 2009-2011 QLogic Corporation
+Copyright (c) 2009-2013 QLogic Corporation
 QLogic Linux qlcnic NIC Driver
 
 You may modify and redistribute the device driver code under the
diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt
index c725d33b316f..0e190180eec8 100644
--- a/Documentation/networking/cs89x0.txt
+++ b/Documentation/networking/cs89x0.txt
@@ -36,7 +36,6 @@ TABLE OF CONTENTS
     4.1 Compiling the Driver as a Loadable Module
     4.2 Compiling the driver to support memory mode
     4.3 Compiling the driver to support Rx DMA 
-    4.4 Compiling the Driver into the Kernel
 
 5.0 TESTING AND TROUBLESHOOTING
     5.1 Known Defects and Limitations
@@ -364,84 +363,6 @@ The compile-time optionality for DMA was removed in the 2.3 kernel
 series.  DMA support is now unconditionally part of the driver.  It is
 enabled by the 'use_dma=1' module option.
 
-4.4 COMPILING THE DRIVER INTO THE KERNEL
-
-If your Linux distribution already has support for the cs89x0 driver
-then simply copy the source file to the /usr/src/linux/drivers/net
-directory to replace the original ones and run the make utility to
-rebuild the kernel.  See Step 3 for rebuilding the kernel.
-
-If your Linux does not include the cs89x0 driver, you need to edit three 
-configuration files, copy the source file to the /usr/src/linux/drivers/net
-directory, and then run the make utility to rebuild the kernel.
-
-1. Edit the following configuration files by adding the statements as
-indicated.  (When possible, try to locate the added text to the section of the
-file containing similar statements).
-
-
-a.) In /usr/src/linux/drivers/net/Config.in, add:
-
-tristate 'CS89x0 support' CONFIG_CS89x0
-
-Example:
-
-     if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-       tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
-     fi
-
-     tristate 'CS89x0 support' CONFIG_CS89x0
-
-     tristate 'NE2000/NE1000 support' CONFIG_NE2000
-     if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-       tristate 'NI5210 support' CONFIG_NI52
-
-
-b.) In /usr/src/linux/drivers/net/Makefile, add the following lines: 
-
-ifeq ($(CONFIG_CS89x0),y)
-L_OBJS += cs89x0.o
-else
-  ifeq ($(CONFIG_CS89x0),m)
-  M_OBJS += cs89x0.o
-  endif
-endif
-
-
-c.) In /linux/drivers/net/Space.c file, add the line:
-
-extern int cs89x0_probe(struct device *dev);
-
-
-Example:
-
- extern int ultra_probe(struct device *dev);
- extern int wd_probe(struct device *dev);
- extern int el2_probe(struct device *dev);
-
- extern int cs89x0_probe(struct device *dev);
-
- extern int ne_probe(struct device *dev);
- extern int hp_probe(struct device *dev);
- extern int hp_plus_probe(struct device *dev);
-
-
-Also add:
-
- #ifdef CONFIG_CS89x0
- 	{ cs89x0_probe,0 },
- #endif
-
-
-2.) Copy the driver source files (cs89x0.c and cs89x0.h) 
-into the /usr/src/linux/drivers/net directory.
-
-
-3.) Go to /usr/src/linux directory and run 'make config' followed by 'make' 
-(or make bzImage) to rebuild the kernel. 
-
-4.) Use the DOS 'setup' utility to disable plug and play on the NIC.
-
 
 5.0 TESTING AND TROUBLESHOOTING
 ===============================================================================
diff --git a/Documentation/networking/depca.txt b/Documentation/networking/depca.txt
deleted file mode 100644
index 24c6b26e5658..000000000000
--- a/Documentation/networking/depca.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-
-DE10x
-=====
-
-Memory Addresses:
-
-	SW1	SW2	SW3	SW4
-64K	on	on	on	on	d0000	dbfff
-	off	on	on	on	c0000	cbfff
-	off	off	on	on	e0000	ebfff
-
-32K	on	on	off	on	d8000	dbfff
-	off	on	off	on	c8000	cbfff
-	off	off	off	on	e8000	ebfff
-
-DBR ROM	on	on			dc000	dffff
-	off	on			cc000	cffff
-	off	off			ec000	effff
-
-Note  that the 2K  mode   is set  by   SW3/SW4  on/off or  off/off.  Address
-assignment is through the RBSA register.
-
-I/O Address:
-	SW5
-0x300	on
-0x200	off
-
-Remote Boot:
-	SW6
-Disable	on
-Enable	off
-
-Remote Boot Timeout:
-	SW7
-2.5min	on
-30s	off
-
-IRQ:
-	SW8	SW9	SW10	SW11	SW12
-2	on	off	off	off	off
-3	off	on	off	off	off
-4	off	off	on	off	off
-5	off	off	off	on	off
-7	off	off	off	off	on
-
-DE20x
-=====
-
-Memory Size:
-
-	SW3	SW4
-64K	on	on
-32K	off	on
-2K	on 	off
-2K	off	off
-
-Start Addresses:
-
-	SW1	SW2	SW3	SW4
-64K	on	on	on	on	c0000	cffff
-	on	off	on	on	d0000	dffff
-	off	on	on	on	e0000	effff
-
-32K	on	on	off	off	c8000	cffff
-	on	off	off	off	d8000	dffff
-	off	on	off	off	e8000	effff
-
-Illegal	off	off	 -	 -	  -	  -
-
-I/O Address:
-	SW5
-0x300	on
-0x200	off
-
-Remote Boot:
-	SW6
-Disable	on
-Enable	off
-
-Remote Boot Timeout:
-	SW7
-2.5min	on
-30s	off
-
-IRQ:
-	SW8	SW9	SW10	SW11	SW12
-5	on	off	off	off	off
-9	off	on	off	off	off
-10	off	off	on	off	off
-11	off	off	off	on	off
-15	off	off	off	off	on
-
diff --git a/Documentation/networking/ewrk3.txt b/Documentation/networking/ewrk3.txt
deleted file mode 100644
index 90e9e5f16e6b..000000000000
--- a/Documentation/networking/ewrk3.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-The EtherWORKS 3  driver in this distribution is  designed to  work with all
-kernels   >  1.1.33   (approx)  and  includes  tools   in  the  'ewrk3tools'
-subdirectory   to  allow  set   up of   the   card,  similar  to  the  MSDOS
-'NICSETUP.EXE' tools provided on  the DOS drivers  disk (type 'make' in that
-subdirectory to make the tools).
-
-The supported  cards are DE203,  DE204 and DE205.  All   other cards are NOT
-supported - refer to 'depca.c' for running the LANCE based network cards and
-'de4x5.c'  for the  DIGITAL   Semiconductor PCI  chip  based  adapters  from
-Digital.
-
-The ability to load  this driver as a  loadable module has been included and
-used extensively  during the driver  development (to save those  long reboot
-sequences). To utilise this ability, you have to do 8 things:
-
-    0) have a copy of the loadable modules code installed on your system.
-    1) copy ewrk3.c from the  /linux/drivers/net directory to your favourite
-    temporary directory.
-    2) edit the  source code near  line 1898 to reflect  the I/O address and
-    IRQ you're using.
-    3) compile  ewrk3.c, but include -DMODULE in  the command line to ensure
-    that the correct bits are compiled (see end of source code).
-    4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
-    kernel with the ewrk3 configuration turned off and reboot.
-    5) insmod ewrk3.o
-          [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
-          [Adam Kropelin: Multiple cards now supported by irq=x1,x2 io=y1,y2]
-    6) run the net startup bits for your new eth?? interface manually 
-    (usually /etc/rc.inet[12] at boot time). 
-    7) enjoy!
-
-    Note that autoprobing is not allowed in loadable modules - the system is
-    already up and running and you're messing with interrupts.
-
-    To unload a module, turn off the associated interface 
-    'ifconfig eth?? down' then 'rmmod ewrk3'.
-
-The performance we've  achieved so far  has been measured through the 'ttcp'
-tool   at 975kB/s.  This  measures  the  total  TCP  stack performance which
-includes the   card,  so don't  expect   to get   much nearer  the  1.25MB/s
-theoretical Ethernet rate.
-
-
-Enjoy!
-
-Dave
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index bbf2005270b5..cdb3e40b9d14 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -17,12 +17,12 @@ creating filters.
 
 LSF is much simpler than BPF. One does not have to worry about
 devices or anything like that. You simply create your filter
-code, send it to the kernel via the SO_ATTACH_FILTER ioctl and
+code, send it to the kernel via the SO_ATTACH_FILTER option and
 if your filter code passes the kernel check on it, you then
 immediately begin filtering data on that socket.
 
 You can also detach filters from your socket via the
-SO_DETACH_FILTER ioctl. This will probably not be used much
+SO_DETACH_FILTER option. This will probably not be used much
 since when you close a socket that has a filter on it the
 filter is automagically removed. The other less common case
 may be adding a different filter on the same socket where you had another
@@ -31,12 +31,19 @@ the old one and placing your new one in its place, assuming your
 filter has passed the checks, otherwise if it fails the old filter
 will remain on that socket.
 
+SO_LOCK_FILTER option allows to lock the filter attached to a
+socket. Once set, a filter cannot be removed or changed. This allows
+one process to setup a socket, attach a filter, lock it then drop
+privileges and be assured that the filter will be kept until the
+socket is closed.
+
 Examples
 ========
 
 Ioctls-
 setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &Filter, sizeof(Filter));
 setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &value, sizeof(value));
+setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER, &value, sizeof(value));
 
 See the BSD bpf.4 manpage and the BSD Packet Filter paper written by
 Steven McCanne and Van Jacobson of Lawrence Berkeley Laboratory.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index dbca66182089..dc2dc87d2557 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -26,6 +26,11 @@ route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
 	this when using large numbers of interfaces and/or routes.
 
+neigh/default/gc_thresh1 - INTEGER
+	Minimum number of entries to keep.  Garbage collector will not
+	purge entries if there are fewer than this number.
+	Default: 256
+
 neigh/default/gc_thresh3 - INTEGER
 	Maximum number of neighbor entries allowed.  Increase this
 	when using large numbers of interfaces and when communicating
@@ -125,17 +130,6 @@ somaxconn - INTEGER
 	Defaults to 128.  See also tcp_max_syn_backlog for additional tuning
 	for TCP sockets.
 
-tcp_abc - INTEGER
-	Controls Appropriate Byte Count (ABC) defined in RFC3465.
-	ABC is a way of increasing congestion window (cwnd) more slowly
-	in response to partial acknowledgments.
-	Possible values are:
-		0 increase cwnd once per acknowledgment (no ABC)
-		1 increase cwnd once per acknowledgment of full sized segment
-		2 allow increase cwnd by two if acknowledgment is
-		  of two segments to compensate for delayed acknowledgments.
-	Default: 0 (off)
-
 tcp_abort_on_overflow - BOOLEAN
 	If listening service is too slow to accept new connections,
 	reset them. Default state is FALSE. It means that if overflow
@@ -214,7 +208,8 @@ tcp_ecn - INTEGER
 	congestion before having to drop packets.
 	Possible values are:
 		0 Disable ECN.  Neither initiate nor accept ECN.
-		1 Always request ECN on outgoing connection attempts.
+		1 Enable ECN when requested by incoming connections and
+		  also request ECN on outgoing connection attempts.
 		2 Enable ECN when requested by incoming connections
 		  but do not request ECN on outgoing connections.
 	Default: 2
diff --git a/Documentation/networking/multicast.txt b/Documentation/networking/multicast.txt
deleted file mode 100644
index b06c8c69266f..000000000000
--- a/Documentation/networking/multicast.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Behaviour of Cards Under Multicast
-==================================
-
-This is how they currently behave, not what the hardware can do--for example,
-the Lance driver doesn't use its filter, even though the code for loading
-it is in the DEC Lance-based driver.
-
-The following are requirements for multicasting 
------------------------------------------------
-AppleTalk	Multicast	hardware filtering not important but
-				 avoid cards only doing promisc
-IP-Multicast	Multicast	hardware filters really help
-IP-MRoute	AllMulti	hardware filters are of no help
-
-
-Board		Multicast	AllMulti	Promisc		Filter
-------------------------------------------------------------------------
-3c501		YES		YES		YES		Software
-3c503		YES		YES		YES		Hardware
-3c505		YES		NO		YES		Hardware
-3c507		NO		NO		NO		N/A
-3c509		YES		YES		YES		Software
-3c59x		YES		YES		YES		Software
-ac3200		YES		YES		YES		Hardware
-apricot		YES		PROMISC		YES		Hardware
-arcnet		NO		NO		NO		N/A
-at1700		PROMISC		PROMISC		YES		Software
-atp		PROMISC		PROMISC		YES		Software
-cs89x0		YES		YES		YES		Software
-de4x5		YES		YES		YES		Hardware
-de600		NO		NO		NO		N/A
-de620		PROMISC		PROMISC		YES		Software
-depca		YES		PROMISC		YES		Hardware
-dmfe		YES		YES		YES		Software(*)
-e2100		YES		YES		YES		Hardware
-eepro		YES		PROMISC		YES		Hardware
-eexpress	NO		NO		NO		N/A
-ewrk3		YES		PROMISC		YES		Hardware
-hp-plus		YES		YES		YES		Hardware
-hp		YES		YES		YES		Hardware
-hp100		YES		YES		YES		Hardware
-ibmtr		NO		NO		NO		N/A
-ioc3-eth	YES		YES		YES		Hardware
-lance		YES		YES		YES		Software(#)
-ne		YES		YES		YES		Hardware
-ni52		<------------------ Buggy ------------------>
-ni65		YES		YES		YES		Software(#)
-seeq		NO		NO		NO		N/A
-sgiseek		<------------------ Buggy ------------------>
-smc-ultra	YES		YES		YES		Hardware
-sunlance	YES		YES		YES		Hardware
-tulip		YES		YES		YES		Hardware
-wavelan		YES		PROMISC		YES		Hardware
-wd		YES		YES		YES		Hardware
-xirc2ps_cs	YES		YES		YES		Hardware
-znet		YES		YES		YES		Software
-
-
-PROMISC = This multicast mode is in fact promiscuous mode. Avoid using
-cards who go PROMISC on any multicast in a multicast kernel.
-
-(#) = Hardware multicast support is not used yet.
-(*) = Hardware support for Davicom 9132 chipset only.
diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt
index 2e9e0ae2cd45..a5d574a9ae09 100644
--- a/Documentation/networking/netconsole.txt
+++ b/Documentation/networking/netconsole.txt
@@ -1,9 +1,10 @@
 
 started by Ingo Molnar <mingo@redhat.com>, 2001.09.17
 2.6 port and netpoll api by Matt Mackall <mpm@selenic.com>, Sep 9 2003
+IPv6 support by Cong Wang <xiyou.wangcong@gmail.com>, Jan 1 2013
 
 Please send bug reports to Matt Mackall <mpm@selenic.com>
-and Satyam Sharma <satyam.sharma@gmail.com>
+Satyam Sharma <satyam.sharma@gmail.com>, and Cong Wang <xiyou.wangcong@gmail.com>
 
 Introduction:
 =============
@@ -41,6 +42,10 @@ Examples:
 
  insmod netconsole netconsole=@/,@10.0.0.2/
 
+  or using IPv6
+
+ insmod netconsole netconsole=@/,@fd00:1:2:3::1/
+
 It also supports logging to multiple remote agents by specifying
 parameters for the multiple agents separated by semicolons and the
 complete string enclosed in "quotes", thusly:
diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt
new file mode 100644
index 000000000000..70da5086153d
--- /dev/null
+++ b/Documentation/networking/nf_conntrack-sysctl.txt
@@ -0,0 +1,176 @@
+/proc/sys/net/netfilter/nf_conntrack_* Variables:
+
+nf_conntrack_acct - BOOLEAN
+	0 - disabled (default)
+	not 0 - enabled
+
+	Enable connection tracking flow accounting. 64-bit byte and packet
+	counters per flow are added.
+
+nf_conntrack_buckets - INTEGER (read-only)
+	Size of hash table. If not specified as parameter during module
+	loading, the default size is calculated by dividing total memory
+	by 16384 to determine the number of buckets but the hash table will
+	never have fewer than 32 or more than 16384 buckets.
+
+nf_conntrack_checksum - BOOLEAN
+	0 - disabled
+	not 0 - enabled (default)
+
+	Verify checksum of incoming packets. Packets with bad checksums are
+	in INVALID state. If this is enabled, such packets will not be
+	considered for connection tracking.
+
+nf_conntrack_count - INTEGER (read-only)
+	Number of currently allocated flow entries.
+
+nf_conntrack_events - BOOLEAN
+	0 - disabled
+	not 0 - enabled (default)
+
+	If this option is enabled, the connection tracking code will
+	provide userspace with connection tracking events via ctnetlink.
+
+nf_conntrack_events_retry_timeout - INTEGER (seconds)
+	default 15
+
+	This option is only relevant when "reliable connection tracking
+	events" are used.  Normally, ctnetlink is "lossy", that is,
+	events are normally dropped when userspace listeners can't keep up.
+
+	Userspace can request "reliable event mode".  When this mode is
+	active, the conntrack will only be destroyed af