Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Changes are seen in a wide range of codes, mainly due to ASoC DAPM
  requirements; HD-audio shows a high peak in diffstat, it's just a
  removal of bunch of old static quirks.

  Some highlights:

   - HDPM: Updates for AIO/RayDAT support, TCO/sync support

   - RME96: Add PCM sync support

   - HD-audio:

     * A few HDMI/DP audio updates (CA assignment fix, stream switching
       fix, Intel DP device list support)
     * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic
       improvements, Chromebook fixes, STAC9228 Dell fixes)
     * Replace the all static quirks for AD codecs with the generic
       parser
     * WAKEEN support for handling irqs in the power saving mode

   - USB-audio: Clean up implicit fb handling and related codes

   - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers
     have had some level of DAPM support added.  In addition, a lot of
     cleanups and improvements in DAPM.

   - Support for ASoC cross-platform compile test

   - New drivers and support for Analog Devices ADAU1702 and
     ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and
     WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas
     R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and
     PCM1792A and Wolfson Microelectronics WM8997

   - DT bindings for kirkwood and i.MX S/PDIF

   - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000.

   - Core helpers for bitbanged AC'97 reset"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits)
  ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches
  ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA
  ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional
  ASoC: soc-pcm: Allow to specify unidirectional dai_link
  ASoC: fsl_spdif: Staticse non-exported symbols
  ASoC: ssm2602: Fix cache sync
  ASoC: Remove unused sysfs_registered field from snd_soc_codec struct
  ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct
  ASoC: Remove unused control_type field from snd_soc_codec struct
  ASoC: fsl: Add one blank space after ':=' in Makefile
  ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c
  ASoC: rt5640: change widget sequence for depop
  ASoC: dapm: Fix auto-disable for inverted controls
  ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF
  ASoC: Samsung: Do not queue cyclic buffers multiple times
  ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata()
  ASoC: designware_i2s: Remove unnecessary dev_set_drvdata()
  ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe()
  ASoC: fsl: Add S/PDIF machine driver
  ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards
  ...

29 files changed, 554 insertions, 107 deletions

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index 38e51ad2e07e..a45ae08c8ed1 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -7,9 +7,30 @@ Required properties:
 - reg: Should contain SSC registers location and length
 - interrupts: Should contain SSC interrupt
 
-Example:
+
+Required properties for devices compatible with "atmel,at91sam9g45-ssc":
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+  the memory interface and SSC DMA channel ID (for tx and rx).
+  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
+
+Examples:
+- PDC transfer:
 ssc0: ssc@fffbc000 {
 	compatible = "atmel,at91rm9200-ssc";
 	reg = <0xfffbc000 0x4000>;
 	interrupts = <14 4 5>;
 };
+
+- DMA transfer:
+ssc0: ssc@f0010000 {
+      compatible = "atmel,at91sam9g45-ssc";
+      reg = <0xf0010000 0x4000>;
+      interrupts = <28 4 5>;
+      dmas = <&dma0 1 13>,
+	     <&dma0 1 14>;
+      dma-names = "tx", "rx";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+      status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
new file mode 100644
index 000000000000..669b8140dd79
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
@@ -0,0 +1,65 @@
+Device tree bindings for Marvell PXA SSP ports
+
+Required properties:
+
+	- compatible:	Must be one of
+				mrvl,pxa25x-ssp
+				mvrl,pxa25x-nssp
+				mrvl,pxa27x-ssp
+				mrvl,pxa3xx-ssp
+				mvrl,pxa168-ssp
+				mrvl,pxa910-ssp
+				mrvl,ce4100-ssp
+				mrvl,lpss-ssp
+
+	- reg:		The memory base
+	- dmas:		Two dma phandles, one for rx, one for tx
+	- dma-names:	Must be "rx", "tx"
+
+
+Example for PXA3xx:
+
+	ssp0: ssp@41000000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41000000 0x40>;
+		ssp-id = <1>;
+		interrupts = <24>;
+		clock-names = "pxa27x-ssp.0";
+		dmas = <&dma 13
+			&dma 14>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp1: ssp@41700000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41700000 0x40>;
+		ssp-id = <2>;
+		interrupts = <16>;
+		clock-names = "pxa27x-ssp.1";
+		dmas = <&dma 15
+			&dma 16>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp2: ssp@41900000 {
+		compatibl3 = "mrvl,pxa3xx-ssp";
+		reg = <0x41900000 0x40>;
+		ssp-id = <3>;
+		interrupts = <0>;
+		clock-names = "pxa27x-ssp.2";
+		dmas = <&dma 66
+			&dma 67>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp3: ssp@41a00000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41a00000 0x40>;
+		ssp-id = <4>;
+		interrupts = <13>;
+		clock-names = "pxa27x-ssp.3";
+		dmas = <&dma 2
+			&dma 3>;
+		dma-names = "rx", "tx";
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/ak4554.c b/Documentation/devicetree/bindings/sound/ak4554.c
new file mode 100644
index 000000000000..934fa02754b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4554.c
@@ -0,0 +1,11 @@
+AK4554 ADC/DAC
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4554"
+
+Example:
+
+ak4554-adc-dac {
+	compatible = "asahi-kasei,ak4554";
+};
diff --git a/Documentation/devicetree/bindings/sound/alc5632.txt b/Documentation/devicetree/bindings/sound/alc5632.txt
index 8608f747dcfe..ffd886d110bd 100644
--- a/Documentation/devicetree/bindings/sound/alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/alc5632.txt
@@ -13,6 +13,25 @@ Required properties:
   - #gpio-cells : Should be two. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
+Pins on the device (for linking into audio routes):
+
+  * SPK_OUTP
+  * SPK_OUTN
+  * HP_OUT_L
+  * HP_OUT_R
+  * AUX_OUT_P
+  * AUX_OUT_N
+  * LINE_IN_L
+  * LINE_IN_R
+  * PHONE_P
+  * PHONE_N
+  * MIC1_P
+  * MIC1_N
+  * MIC2_P
+  * MIC2_N
+  * MICBIAS1
+  * DMICDAT
+
 Example:
 
 alc5632: alc5632@1e {
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
new file mode 100644
index 000000000000..0720857089a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -0,0 +1,35 @@
+* Atmel at91sam9x5ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,sam9x5-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headphone Jack
+ * Line In Jack
+
+wm8731 pins:
+cf Documentation/devicetree/bindings/sound/wm8731.txt
+
+Example:
+sound {
+	compatible = "atmel,sam9x5-wm8731-audio";
+
+	atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "RHPOUT",
+		"Headphone Jack", "LHPOUT",
+		"LLINEIN", "Line In Jack",
+		"RLINEIN", "Line In Jack";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
new file mode 100644
index 000000000000..8bbe50c884b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
@@ -0,0 +1,55 @@
+Atmel ASoC driver with wm8904 audio codec complex
+
+Required properties:
+  - compatible: "atmel,asoc-wm8904"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source. Valid names for sources and
+    sinks are the WM8904's pins, and the jacks on the board:
+
+    WM8904 pins:
+
+    * IN1L
+    * IN1R
+    * IN2L
+    * IN2R
+    * IN3L
+    * IN3R
+    * HPOUTL
+    * HPOUTR
+    * LINEOUTL
+    * LINEOUTR
+    * MICBIAS
+
+    Board connectors:
+
+    * Headphone Jack
+    * Line In Jack
+    * Mic
+
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8904 audio codec
+
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+	compatible = "atmel,asoc-wm8904";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+	atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "HPOUTL",
+		"Headphone Jack", "HPOUTR",
+		"IN2L", "Line In Jack",
+		"IN2R", "Line In Jack",
+		"Mic", "MICBIAS",
+		"IN1L", "Mic";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8904>;
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
new file mode 100644
index 000000000000..f2ae335670f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -0,0 +1,54 @@
+Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Freescale S/PDIF audio block is a stereo transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+  - compatible : Compatible list, must contain "fsl,imx35-spdif".
+
+  - reg : Offset and length of the register set for the device.
+
+  - interrupts : Contains the spdif interrupt.
+
+  - dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"core"		The core clock of spdif controller
+	"rxtx<0-7>"	Clock source list for tx and rx clock.
+			This clock list should be identical to
+			the source list connecting to the spdif
+			clock mux in "SPDIF Transceiver Clock
+			Diagram" of SoC reference manual. It
+			can also be referred to TxClk_Source
+			bit of register SPDIF_STC.
+
+Example:
+
+spdif: spdif@02004000 {
+	compatible = "fsl,imx35-spdif";
+	reg = <0x02004000 0x4000>;
+	interrupts = <0 52 0x04>;
+	dmas = <&sdma 14 18 0>,
+	       <&sdma 15 18 0>;
+	dma-names = "rx", "tx";
+
+	clocks = <&clks 197>, <&clks 3>,
+	       <&clks 197>, <&clks 107>,
+	       <&clks 0>, <&clks 118>,
+	       <&clks 62>, <&clks 139>,
+	       <&clks 0>;
+	clock-names = "core", "rxtx0",
+		"rxtx1", "rxtx2",
+		"rxtx3", "rxtx4",
+		"rxtx5", "rxtx6",
+		"rxtx7";
+
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 5ff76c9c57d2..4303b6ab6208 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -43,10 +43,22 @@ Required properties:
                     together.  This would still allow different sample sizes,
                     but not different sample rates.
 
+Required are also ac97 link bindings if ac97 is used. See
+Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
+bindings.
+
 Optional properties:
 - codec-handle:     Phandle to a 'codec' node that defines an audio
                     codec connected to this SSI.  This node is typically
                     a child of an I2C or other control node.
+- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
+		    filter the codec stream. This is necessary for some boards
+		    where an incompatible codec is connected to this SSI, e.g.
+		    on pca100 and pcm043.
+- dmas:		    Generic dma devicetree binding as described in
+		    Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
+		    is not defined.
 
 Child 'codec' node required properties:
 - compatible:       Compatible list, contains the name of the codec
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
new file mode 100644
index 000000000000..7d13479f9c3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
@@ -0,0 +1,34 @@
+Freescale i.MX audio complex with S/PDIF transceiver
+
+Required properties:
+
+  - compatible : "fsl,imx-audio-spdif"
+
+  - model : The user-visible name of this sound complex
+
+  - spdif-controller : The phandle of the i.MX S/PDIF controller
+
+
+Optional properties:
+
+  - spdif-out : This is a boolean property. If present, the transmitting
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF out connector/jack on the board or it's connecting to some
+    other IP block, such as an HDMI encoder/display-controller.
+
+  - spdif-in : This is a boolean property. If present, the receiving
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF in connector/jack on the board.
+
+* Note: At least one of these two properties should be set in the DT binding.
+
+
+Example:
+
+sound-spdif {
+	compatible = "fsl,imx-audio-spdif";
+	model = "imx-spdif";
+	spdif-controller = <&spdif>;
+	spdif-out;
+	spdif-in;
+};
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
index 215aa9817213..f88a00e54c63 100644
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt
@@ -5,6 +5,15 @@ Required properties:
   or "fsl,imx31-audmux" for the version firstly used on i.MX31.
 - reg : Should contain AUDMUX registers location and length
 
+An initial configuration can be setup using child nodes.
+
+Required properties of optional child nodes:
+- fsl,audmux-port : Integer of the audmux port that is configured by this
+  child node.
+- fsl,port-config : List of configuration options for the specific port. For
+  imx31-audmux and above, it is a list of tuples <ptcr pdcr>. For
+  imx21-audmux it is a list of pcr values.
+
 Example:
 
 audmux@021d8000 {
diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
new file mode 100644
index 000000000000..74c9ba6c2823
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
@@ -0,0 +1,28 @@
+Marvell PXA SSP CPU DAI bindings
+
+Required properties:
+
+	compatible	Must be "mrvl,pxa-ssp-dai"
+	port		A phandle reference to a PXA ssp upstream device
+
+Example:
+
+	/* upstream device */
+
+	ssp0: ssp@41000000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41000000 0x40>;
+		interrupts = <24>;
+		clock-names = "pxa27x-ssp.0";
+		dmas = <&dma 13
+			&dma 14>;
+		dma-names = "rx", "tx";
+	};
+
+	/* DAI as user */
+
+	ssp_dai0: ssp_dai@0 {
+		compatible = "mrvl,pxa-ssp-dai";
+		port = <&ssp0>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt
new file mode 100644
index 000000000000..551fbb8348c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt
@@ -0,0 +1,15 @@
+DT bindings for ARM PXA2xx PCM platform driver
+
+This is just a dummy driver that registers the PXA ASoC platform driver.
+It does not have any resources assigned.
+
+Required properties:
+
+	- compatible		'mrvl,pxa-pcm-audio'
+
+Example:
+
+	pxa_pcm_audio: snd_soc_pxa_audio {
+		compatible = "mrvl,pxa-pcm-audio";
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mvebu-audio.txt b/Documentation/devicetree/bindings/sound/mvebu-audio.txt
new file mode 100644
index 000000000000..7e5fd37c1b3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mvebu-audio.txt
@@ -0,0 +1,29 @@
+* mvebu (Kirkwood, Dove, Armada 370) audio controller
+
+Required properties:
+
+- compatible: "marvell,mvebu-audio"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: list of two irq numbers.
+  The first irq is used for data flow and the second one is used for errors.
+
+- clocks: one or two phandles.
+  The first one is mandatory and defines the internal clock.
+  The second one is optional and defines an external clock.
+
+- clock-names: names associated to the clocks:
+	"internal" for the internal clock
+	"extclk" for the external clock
+
+Example:
+
+i2s1: audio-controller@b4000 {
+	compatible = "marvell,mvebu-audio";
+	reg = <0xb4000 0x2210>;
+	interrupts = <21>, <22>;
+	clocks = <&gate_clk 13>;
+	clock-names = "internal";
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index 05ffecb57103..8b8903ef0800 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -11,28 +11,8 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the ALC5632's pins:
-
-  ALC5632 pins:
-
-  * SPK_OUTP
-  * SPK_OUTN
-  * HP_OUT_L
-  * HP_OUT_R
-  * AUX_OUT_P
-  * AUX_OUT_N
-  * LINE_IN_L
-  * LINE_IN_R
-  * PHONE_P
-  * PHONE_N
-  * MIC1_P
-  * MIC1_N
-  * MIC2_P
-  * MIC2_N
-  * MICBIAS1
-  * DMICDAT
-
-  Board connectors:
+  sinks are the ALC5632's pins as documented in the binding for the device
+  and:
 
   * Headset Stereophone
   * Int Spk
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
index d130818700b2..dc6224994d69 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
@@ -11,32 +11,12 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the RT5640's pins, and the jacks on the board:
-
-  RT5640 pins:
-
-  * DMIC1
-  * DMIC2
-  * MICBIAS1
-  * IN1P
-  * IN1R
-  * IN2P
-  * IN2R
-  * HPOL
-  * HPOR
-  * LOUTL
-  * LOUTR
-  * MONOP
-  * MONON
-  * SPOLP
-  * SPOLN
-  * SPORP
-  * SPORN
-
-  Board connectors:
+  sinks are the RT5640's pins (as documented in its binding), and the jacks
+  on the board:
 
   * Headphones
   * Speakers
+  * Mic Jack
 
 - nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
   connected to the CODEC.
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index d14510613a7f..aab6ce0ad2fc 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -11,31 +11,8 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the WM8753's pins, and the jacks on the board:
-
-  WM8753 pins:
-
-  * LOUT1
-  * LOUT2
-  * ROUT1
-  * ROUT2
-  * MONO1
-  * MONO2
-  * OUT3
-  * OUT4
-  * LINE1
-  * LINE2
-  * RXP
-  * RXN
-  * ACIN
-  * ACOP
-  * MIC1N
-  * MIC1
-  * MIC2N
-  * MIC2
-  * Mic Bias
-
-  Board connectors:
+  sinks are the WM8753's pins as documented in the binding for the WM8753,
+  and the jacks on the board:
 
   * Headphone Jack
   * Mic Jack
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index 3bf722deb722..4b44dfb6ca0d 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -11,28 +11,8 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the WM8903's pins, and the jacks on the board:
-
-  WM8903 pins:
-
-  * IN1L
-  * IN1R
-  * IN2L
-  * IN2R
-  * IN3L
-  * IN3R
-  * DMICDAT
-  * HPOUTL
-  * HPOUTR
-  * LINEOUTL
-  * LINEOUTR
-  * LOP
-  * LON
-  * ROP
-  * RON
-  * MICBIAS
-
-  Board connectors:
+  sinks are the WM8903's pins (documented in the WM8903 binding document),
+  and the jacks on the board:
 
   * Headphone Jack
   * Int Spk
diff --git a/Documentation/devicetree/bindings/sound/pcm1792a.txt b/Documentation/devicetree/bindings/sound/pcm1792a.txt
new file mode 100644
index 000000000000..970ba1ed576f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm1792a.txt
@@ -0,0 +1,18 @@
+Texas Instruments pcm1792a DT bindings
+
+This driver supports the SPI bus.
+
+Required properties:
+
+ - compatible: "ti,pcm1792a"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Examples:
+
+	codec_spi: 1792a@0 {
+		compatible = "ti,pcm1792a";
+		spi-max-frequency = <600000>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index 005bcb24d72d..068a1141b06f 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -18,6 +18,26 @@ Optional properties:
 
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 
+Pins on the device (for linking into audio routes):
+
+  * DMIC1
+  * DMIC2
+  * MICBIAS1
+  * IN1P
+  * IN1R
+  * IN2P
+  * IN2R
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOP
+  * MONON
+  * SPOLP
+  * SPOLN
+  * SPORP
+  * SPORN
+
 Example:
 
 rt5640 {
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 025e66b85a43..7386d444ada1 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -2,7 +2,15 @@
 
 Required SoC Specific Properties:
 
-- compatible : "samsung,i2s-v5"
+- compatible : should be one of the following.
+   - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.
+   - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with
+     secondary fifo, s/w reset control and internal mux for root clk src.
+   - samsung,exynos5420-i2s: for 8/16/24bit multichannel(7.1) I2S with
+     secondary fifo, s/w reset control, internal mux for root clk src and
+     TDM support. TDM (Time division multiplexing) is to allow transfer of
+     multiple channel audio data on single data line.
+
 - reg: physical base address of the controller and length of memory mapped
   region.
 - dmas: list of DMA controller phandle and DMA request line ordered pairs.
@@ -21,13 +29,6 @@ Required SoC Specific Properties:
 
 Optional SoC Specific Properties:
 
-- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
-  support, this flag is enabled.
-- samsung,supports-rstclr: This flag should be set if I2S software reset bit
-  control is required. When this flag is set I2S software reset bit will be
-  enabled or disabled based on need.
-- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,
-  then this flag is enabled.
 - samsung,idma-addr: Internal DMA register base address of the audio
   sub system(used in secondary sound source).
 - pinctrl-0: Should specify pin control groups used for this controller.
@@ -36,7 +37,7 @@ Optional SoC Specific Properties:
 Example:
 
 i2s0: i2s@03830000 {
-	compatible = "samsung,i2s-v5";
+	compatible = "samsung,s5pv210-i2s";
 	reg = <0x03830000 0x100>;
 	dmas = <&pdma0 10
 		&pdma0 9
@@ -46,9 +47,6 @@ i2s0: i2s@03830000 {
 		<&clock_audss EXYNOS_I2S_BUS>,
 		<&clock_audss EXYNOS_SCLK_I2S>;
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-	samsung,supports-6ch;
-	samsung,supports-rstclr;
-	samsung,supports-secdai;
 	samsung,idma-addr = <0x03000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s0_bus>;
diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
new file mode 100644
index 000000000000..80152a87f239
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
@@ -0,0 +1,28 @@
+AC97 link bindings
+