Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.0/v4.20

As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:

 - More component transitions from Morimoto-san, I think we're about
   finished with this.  Thanks for all the hard work!
 - Morimoto-san also added a bunch of for_each_foo macros
 - A bunch of cleanups and fixes for DAPM from Charles.
 - MCLK support for several different devices, including CS42L51, STM32
   SAI, and MAX98373.
 - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
   MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
   TI PCM3060.

44 files changed, 456 insertions, 73 deletions

diff --git a/Documentation/ABI/stable/sysfs-bus-xen-backend b/Documentation/ABI/stable/sysfs-bus-xen-backend
index 3d5951c8bf5f..e8b60bd766f7 100644
--- a/Documentation/ABI/stable/sysfs-bus-xen-backend
+++ b/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -73,3 +73,12 @@ KernelVersion:	3.0
 Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Description:
                 Number of sectors written by the frontend.
+
+What:		/sys/bus/xen-backend/devices/*/state
+Date:		August 2018
+KernelVersion:	4.19
+Contact:	Joe Jin <joe.jin@oracle.com>
+Description:
+                The state of the device. One of: 'Unknown',
+                'Initialising', 'Initialised', 'Connected', 'Closing',
+                'Closed', 'Reconfiguring', 'Reconfigured'.
diff --git a/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
index caa311d59ac1..6d83f95a8a8e 100644
--- a/Documentation/ABI/stable/sysfs-devices-system-xen_memory
+++ b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -75,3 +75,12 @@ Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Description:
 		Amount (in KiB) of low (or normal) memory in the
 		balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date:		September 2018
+KernelVersion:	4.20
+Contact:	xen-devel@lists.xenproject.org
+Description:
+		Control scrubbing pages before returning them to Xen for others domains
+		use. Can be set with xen_scrub_pages cmdline
+		parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback
index 8bb43b66eb55..4e7babb3ba1f 100644
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -15,3 +15,13 @@ Description:
                 blkback. If the frontend tries to use more than
                 max_persistent_grants, the LRU kicks in and starts
                 removing 5% of max_persistent_grants every 100ms.
+
+What:           /sys/module/xen_blkback/parameters/persistent_grant_unused_seconds
+Date:           August 2018
+KernelVersion:  4.19
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                How long a persistent grant is allowed to remain
+                allocated without being in use. The time is in
+                seconds, 0 means indefinitely long.
+                The default is 60 seconds.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9871e649ffef..92eb1f42240d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3523,6 +3523,12 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.
 
+	random.trust_cpu={on,off}
+			[KNL] Enable or disable trusting the use of the
+			CPU's random number generator (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_CPU.
+
 	ras=option[,option,...]	[KNL] RAS-specific options
 
 		cec_disable	[X86]
@@ -4994,6 +5000,12 @@
 			Disables the PV optimizations forcing the HVM guest to
 			run as generic HVM guest with no PV drivers.
 
+	xen_scrub_pages=	[XEN]
+			Boolean option to control scrubbing pages before giving them back
+			to Xen, for use by other domains. Can be also changed at runtime
+			with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+			Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt
index f128f736b4a5..7169a0ec41d8 100644
--- a/Documentation/arm64/sve.txt
+++ b/Documentation/arm64/sve.txt
@@ -200,7 +200,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
       thread.
 
     * Changing the vector length causes all of P0..P15, FFR and all bits of
-      Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+      Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
       unspecified.  Calling PR_SVE_SET_VL with vl equal to the thread's current
       vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
       flag, does not constitute a change to the vector length for this purpose.
@@ -500,7 +500,7 @@ References
 [2] arch/arm64/include/uapi/asm/ptrace.h
     AArch64 Linux ptrace ABI definitions
 
-[3] linux/Documentation/arm64/cpu-feature-registers.txt
+[3] Documentation/arm64/cpu-feature-registers.txt
 
 [4] ARM IHI0055C
     http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 390c145f01d7..52a719b49afd 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -348,3 +348,7 @@ Version History
 1.13.1  Fix deadlock caused by early md_stop_writes().  Also fix size an
 	state races.
 1.13.2  Fix raid redundancy validation and avoid keeping raid set frozen
+1.14.0  Fix reshape race on small devices.  Fix stripe adding reshape
+	deadlock/potential data corruption.  Update superblock when
+	specific devices are requested via rebuild.  Fix RAID leg
+	rebuild errors.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 00e4365d7206..091c8dfd3229 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -3,7 +3,6 @@
 Required properties:
 - compatible :
   - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
-  - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
 - reg : address and length of the lpi2c master registers
 - interrupts : lpi2c interrupt
 - clocks : lpi2c clock specifier
@@ -11,7 +10,7 @@ Required properties:
 Examples:
 
 lpi2c7: lpi2c7@40a50000 {
-	compatible = "fsl,imx8dv-lpi2c";
+	compatible = "fsl,imx7ulp-lpi2c";
 	reg = <0x40A50000 0x10000>;
 	interrupt-parent = <&intc>;
 	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 996ce84352cb..7cccc49b6bea 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -1,4 +1,4 @@
-Device-Tree bindings for input/gpio_keys.c keyboard driver
+Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
 
 Required properties:
 	- compatible = "gpio-keys";
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
index b0a8af51c388..265b223cd978 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
@@ -11,7 +11,7 @@ The RISC-V supervisor ISA manual specifies three interrupt sources that are
 attached to every HLIC: software interrupts, the timer interrupt, and external
 interrupts.  Software interrupts are used to send IPIs between cores.  The
 timer interrupt comes from an architecturally mandated real-time timer that is
-controller via Supervisor Binary Interface (SBI) calls and CSR reads.  External
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads.  External
 interrupts connect all other device interrupts to the HLIC, which are routed
 via the platform-level interrupt controller (PLIC).
 
@@ -25,7 +25,15 @@ in the system.
 
 Required properties:
 - compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>
+- #interrupt-cells : should be <1>.  The interrupt sources are defined by the
+  RISC-V supervisor ISA manual, with only the following three interrupts being
+  defined for supervisor mode:
+    - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+      call and is reserved for use by software.
+    - Source 5 is the supervisor timer interrupt, which can be configured by
+      SBI calls and implements a one-shot timer.
+    - Source 9 is the supervisor external interrupt, which chains to all other
+      device interrupts.
 - interrupt-controller : Identifies the node as an interrupt controller
 
 Furthermore, this interrupt-controller MUST be embedded inside the cpu
@@ -38,7 +46,7 @@ An example device tree entry for a HLIC is show below.
 		...
 		cpu1-intc: interrupt-controller {
 			#interrupt-cells = <1>;
-			compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
+			compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
 			interrupt-controller;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 41089369f891..b3acebe08eb0 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -19,6 +19,10 @@ Required properties:
 - slaves		: Specifies number for slaves
 - active_slave		: Specifies the slave to use for time stamping,
 			  ethtool and SIOCGMIIPHY
+- cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
+			  device. See also cpsw-phy-sel.txt for it's binding.
+			  Note that in legacy cases cpsw-phy-sel may be
+			  a child device instead of a phandle.
 
 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
@@ -75,6 +79,7 @@ Examples:
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		syscon = <&cm>;
+		cpsw-phy-sel = <&phy_sel>;
 		cpsw_emac0: slave@0 {
 			phy_id = <&davinci_mdio>, <0>;
 			phy-mode = "rgmii-txid";
@@ -103,6 +108,7 @@ Examples:
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		syscon = <&cm>;
+		cpsw-phy-sel = <&phy_sel>;
 		cpsw_emac0: slave@0 {
 			phy_id = <&davinci_mdio>, <0>;
 			phy-mode = "rgmii-txid";
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 457d5ae16f23..3e17ac1d5d58 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -10,6 +10,7 @@ Required properties:
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
   Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
+  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
   Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 76db9f13ad96..abc36274227c 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -16,6 +16,7 @@ Required properties:
 	      "renesas,ether-r8a7794"  if the device is a part of R8A7794 SoC.
 	      "renesas,gether-r8a77980" if the device is a part of R8A77980 SoC.
 	      "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
+	      "renesas,ether-r7s9210" if the device is a part of R7S9210 SoC.
 	      "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
 	      "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
 	                                device.
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
new file mode 100644
index 000000000000..e79aeef73f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
@@ -0,0 +1,54 @@
+Analog Devices ADAU1977/ADAU1978/ADAU1979
+
+Datasheets:
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+This driver supports both the I2C and SPI bus.
+
+Required properties:
+ - compatible: Should contain one of the following:
+               "adi,adau1977"
+               "adi,adau1978"
+               "adi,adau1979"
+
+ - AVDD-supply: analog power supply for the device, please consult
+                Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+ - reset-gpio:  the reset pin for the chip, for more details consult
+                Documentation/devicetree/bindings/gpio/gpio.txt
+
+ - DVDD-supply: supply voltage for the digital core, please consult
+                Documentation/devicetree/bindings/regulator/regulator.txt
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg:         The i2c address. Value depends on the state of ADDR0
+                and ADDR1, as wired in hardware.
+
+Examples:
+
+	adau1977_spi: adau1977@0 {
+		compatible = "adi,adau1977";
+		spi-max-frequency = <600000>;
+
+		AVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator_digital>;
+
+		reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};
+
+	adau1977_i2c: adau1977@11 {
+		compatible = "adi,adau1977";
+		reg = <0x11>;
+
+		AVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator_digital>;
+
+		reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
new file mode 100644
index 000000000000..5672d0bc5b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
@@ -0,0 +1,24 @@
+* Amlogic Audio PDM input
+
+Required properties:
+- compatible: 'amlogic,axg-pdm'
+- reg: physical base address of the controller and length of memory
+       mapped region.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+  * "pclk"   : peripheral clock.
+  * "dclk"   : pdm digital clock
+  * "sysclk" : dsp system clock
+- #sound-dai-cells: must be 0.
+
+Example of PDM on the A113 SoC:
+
+pdm: audio-controller@ff632000 {
+	compatible = "amlogic,axg-pdm";
+	reg = <0x0 0xff632000 0x0 0x34>;
+	#sound-dai-cells = <0>;
+	clocks = <&clkc_audio AUD_CLKID_PDM>,
+		 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+		 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+	clock-names = "pclk", "dclk", "sysclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
new file mode 100644
index 000000000000..4b5de33ce377
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l51.txt
@@ -0,0 +1,17 @@
+CS42L51 audio CODEC
+
+Optional properties:
+
+  - clocks : a list of phandles + clock-specifiers, one for each entry in
+    clock-names
+
+  - clock-names : must contain "MCLK"
+
+Example:
+
+cs42l51: cs42l51@4a {
+	compatible = "cirrus,cs42l51";
+	reg = <0x4a>;
+	clocks = <&mclk_prov>;
+	clock-names = "MCLK";
+};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98088.txt b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
new file mode 100644
index 000000000000..da764d913319
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
@@ -0,0 +1,23 @@
+MAX98088 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible: "maxim,max98088" or "maxim,max98089".
+- reg: The I2C address of the device.
+
+Optional properties:
+
+- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
+  "consumer" for more information.
+- clock-names: must be set to "mclk"
+
+Example:
+
+max98089: codec@10 {
+	compatible = "maxim,max98089";
+	reg = <0x10>;
+	clocks = <&clks IMX6QDL_CLK_CKO2>;
+	clock-names = "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
new file mode 100644
index 000000000000..912f8fae11c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
@@ -0,0 +1,23 @@
+Mikroe-PROTO audio board
+
+Required properties:
+  - compatible: "mikroe,mikroe-proto"
+  - dai-format: Must be "i2s".
+  - i2s-controller: The phandle of the I2S controller.
+  - audio-codec: The phandle of the WM8731 audio codec.
+Optional properties:
+  - model: The user-visible name of this sound complex.
+  - bitclock-master: Indicates dai-link bit clock master; for details see simple-card.txt (1).
+  - frame-master: Indicates dai-link frame master; for details see simple-card.txt (1).
+
+(1) : There must be the same master for both bit and frame clocks.
+
+Example:
+	sound {
+		compatible = "mikroe,mikroe-proto";
+		model = "wm8731 @ sama5d2_xplained";
+		i2s-controller = <&i2s0>;
+		audio-codec = <&wm8731>;
+		dai-format = "i2s";
+        };
+};
diff --git a/Documentation/devicetree/bindings/sound/nau8822.txt b/Documentation/devicetree/bindings/sound/nau8822.txt
new file mode 100644
index 000000000000..a471d162d4e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8822.txt
@@ -0,0 +1,16 @@
+NAU8822 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8822"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8822@1a {
+	compatible = "nuvoton,nau8822";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt
new file mode 100644
index 000000000000..90fcb8523099
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm3060.txt
@@ -0,0 +1,17 @@
+PCM3060 audio CODEC
+
+This driver supports both I2C and SPI.
+
+Required properties:
+
+- compatible: "ti,pcm3060"
+
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
+
+Examples:
+
+	pcm3060: pcm3060@46 {
+		 compatible = "ti,pcm3060";
+		 reg = <0x46>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index a8179409c194..d74888b9f1bb 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -49,7 +49,7 @@ configuration of each dai. Must contain the following properties.
 	Usage: required for mi2s interface
 	Value type: <prop-encoded-array>
 	Definition: Must be list of serial data lines used by this dai.
-	should be one or more of the 1-4 sd lines.
+	should be one or more of the 0-3 sd lines.
 
  - qcom,tdm-sync-mode:
 	Usage: required for tdm interface
@@ -137,42 +137,42 @@ q6afe@4 {
 
 		prim-mi2s-rx@16 {
 			reg = <16>;
-			qcom,sd-lines = <1 3>;
+			qcom,sd-lines = <0 2>;
 		};
 
 		prim-mi2s-tx@17 {
 			reg = <17>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 
 		sec-mi2s-rx@18 {
 			reg = <18>;
-			qcom,sd-lines = <1 4>;
+			qcom,sd-lines = <0 3>;
 		};
 
 		sec-mi2s-tx@19 {
 			reg = <19>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 
 		tert-mi2s-rx@20 {
 			reg = <20>;
-			qcom,sd-lines = <2 4>;
+			qcom,sd-lines = <1 3>;
 		};
 
 		tert-mi2s-tx@21 {
 			reg = <21>;
-			qcom,sd-lines = <1>;
+			qcom,sd-lines = <0>;
 		};
 
 		quat-mi2s-rx@22 {
 			reg = <22>;
-			qcom,sd-lines = <1>;
+			qcom,sd-lines = <0>;
 		};
 
 		quat-mi2s-tx@23 {
 			reg = <23>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 9e764270c36b..d92b705e7917 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -340,10 +340,12 @@ Required properties:
 - compatible			: "renesas,rcar_sound-<soctype>", fallbacks
 				  "renesas,rcar_sound-gen1" if generation1, and
 				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
-				  "renesas,rcar_sound-gen3" if generation3
+				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
 				  Examples with soctypes are:
 				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
+				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
+				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
@@ -353,6 +355,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
 				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
 				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
+				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt
index 255de3ae5b2f..52265fb757c5 100644
--- a/Documentation/devicetree/bindings/sound/st,sta32x.txt
+++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt
@@ -19,6 +19,10 @@ Required properties:
 
 Optional properties:
 
+  - clocks, clock-names: Clock specifier for XTI input clock.
+	If specified, the clock will be enabled when the codec is probed,
+	and disabled when it is removed. The 'clock-names' must be set to 'xti'.
+
   -  st,output-conf: number, Selects the output configuration:
 	0: 2-channel (full-bridge) power, 2-channel data-out
 	1: 2 (half-bridge). 1 (full-bridge) on-board power
@@ -39,6 +43,9 @@ Optional properties:
   -  st,thermal-warning-recover:
 	If present, thermal warning recovery is enabled.
 
+  - st,fault-detect-recovery:
+	If present, fault detect recovery is enabled.
+
   -  st,thermal-warning-adjustment:
 	If present, thermal warning adjustment is enabled.
 
@@ -76,6 +83,8 @@ Example:
 codec: sta32x@38 {
 	compatible = "st,sta32x";
 	reg = <0x1c>;
+	clocks = <&clock>;
+	clock-names = "xti";