Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

24 files changed, 484 insertions, 329 deletions

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index f508a8a27fea..5e7d84b48505 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -174,7 +174,7 @@
 		</para>
 		<programlisting>
 static struct mtd_info *board_mtd;
-static unsigned long baseaddr;
+static void __iomem *baseaddr;
 		</programlisting>
 		<para>
 			Static example
@@ -182,7 +182,7 @@ static unsigned long baseaddr;
 		<programlisting>
 static struct mtd_info board_mtd;
 static struct nand_chip board_chip;
-static unsigned long baseaddr;
+static void __iomem *baseaddr;
 		</programlisting>
 	</sect1>
 	<sect1 id="Partition_defines">
@@ -283,8 +283,8 @@ int __init board_init (void)
 	}
 
 	/* map physical address */
-	baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
-	if(!baseaddr){
+	baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
+	if (!baseaddr) {
 		printk("Ioremap to access NAND chip failed\n");
 		err = -EIO;
 		goto out_mtd;
@@ -316,7 +316,7 @@ int __init board_init (void)
 	goto out;
 
 out_ior:
-	iounmap((void *)baseaddr);
+	iounmap(baseaddr);
 out_mtd:
 	kfree (board_mtd);
 out:
@@ -341,7 +341,7 @@ static void __exit board_cleanup (void)
 	nand_release (board_mtd);
 
 	/* unmap physical address */
-	iounmap((void *)baseaddr);
+	iounmap(baseaddr);
 	
 	/* Free the MTD device structure */
 	kfree (board_mtd);
diff --git a/Documentation/IO-mapping.txt b/Documentation/IO-mapping.txt
index 78a440695e11..1b5aa10df845 100644
--- a/Documentation/IO-mapping.txt
+++ b/Documentation/IO-mapping.txt
@@ -157,7 +157,7 @@ For such memory, you can do things like
 	 * access only the 640k-1MB area, so anything else
 	 * has to be remapped.
 	 */
-	char * baseptr = ioremap(0xFC000000, 1024*1024);
+	void __iomem *baseptr = ioremap(0xFC000000, 1024*1024);
 
 	/* write a 'A' to the offset 10 of the area */
 	writeb('A',baseptr+10);
diff --git a/Documentation/DMA-mapping.txt b/Documentation/PCI/PCI-DMA-mapping.txt
index ecad88d9fe59..ecad88d9fe59 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/PCI/PCI-DMA-mapping.txt
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index 961a0513f8c3..a406286f6f3e 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -1,7 +1,5 @@
 00-INDEX
 	- This file
-as-iosched.txt
-	- Anticipatory IO scheduler
 barrier.txt
 	- I/O Barriers
 biodoc.txt
diff --git a/Documentation/block/as-iosched.txt b/Documentation/block/as-iosched.txt
deleted file mode 100644
index 738b72be128e..000000000000
--- a/Documentation/block/as-iosched.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Anticipatory IO scheduler
--------------------------
-Nick Piggin <piggin@cyberone.com.au>    13 Sep 2003
-
-Attention! Database servers, especially those using "TCQ" disks should
-investigate performance with the 'deadline' IO scheduler. Any system with high
-disk performance requirements should do so, in fact.
-
-If you see unusual performance characteristics of your disk systems, or you
-see big performance regressions versus the deadline scheduler, please email
-me. Database users don't bother unless you're willing to test a lot of patches
-from me ;) its a known issue.
-
-Also, users with hardware RAID controllers, doing striping, may find
-highly variable performance results with using the as-iosched. The
-as-iosched anticipatory implementation is based on the notion that a disk
-device has only one physical seeking head.  A striped RAID controller
-actually has a head for each physical device in the logical RAID device.
-
-However, setting the antic_expire (see tunable parameters below) produces
-very similar behavior to the deadline IO scheduler.
-
-Selecting IO schedulers
------------------------
-Refer to Documentation/block/switching-sched.txt for information on
-selecting an io scheduler on a per-device basis.
-
-Anticipatory IO scheduler Policies
-----------------------------------
-The as-iosched implementation implements several layers of policies
-to determine when an IO request is dispatched to the disk controller.
-Here are the policies outlined, in order of application.
-
-1. one-way Elevator algorithm.
-
-The elevator algorithm is similar to that used in deadline scheduler, with
-the addition that it allows limited backward movement of the elevator
-(i.e. seeks backwards).  A seek backwards can occur when choosing between
-two IO requests where one is behind the elevator's current position, and
-the other is in front of the elevator's position. If the seek distance to
-the request in back of the elevator is less than half the seek distance to
-the request in front of the elevator, then the request in back can be chosen.
-Backward seeks are also limited to a maximum of MAXBACK (1024*1024) sectors.
-This favors forward movement of the elevator, while allowing opportunistic
-"short" backward seeks.
-
-2. FIFO expiration times for reads and for writes.
-
-This is again very similar to the deadline IO scheduler.  The expiration
-times for requests on these lists is tunable using the parameters read_expire
-and write_expire discussed below.  When a read or a write expires in this way,
-the IO scheduler will interrupt its current elevator sweep or read anticipation
-to service the expired request.
-
-3. Read and write request batching
-
-A batch is a collection of read requests or a collection of write
-requests.  The as scheduler alternates dispatching read and write batches
-to the driver.  In the case a read batch, the scheduler submits read
-requests to the driver as long as there are read requests to submit, and
-the read batch time limit has not been exceeded (read_batch_expire).
-The read batch time limit begins counting down only when there are
-competing write requests pending.
-
-In the case of a write batch, the scheduler submits write requests to
-the driver as long as there are write requests available, and the
-write batch time limit has not been exceeded (write_batch_expire).
-However, the length of write batches will be gradually shortened
-when read batches frequently exceed their time limit.
-
-When changing between batch types, the scheduler waits for all requests
-from the previous batch to complete before scheduling requests for the
-next batch.
-
-The read and write fifo expiration times described in policy 2 above
-are checked only when in scheduling IO of a batch for the corresponding
-(read/write) type.  So for example, the read FIFO timeout values are
-tested only during read batches.  Likewise, the write FIFO timeout
-values are tested only during write batches.  For this reason,
-it is generally not recommended for the read batch time
-to be longer than the write expiration time, nor for the write batch
-time to exceed the read expiration time (see tunable parameters below).
-
-When the IO scheduler changes from a read to a write batch,
-it begins the elevator from the request that is on the head of the
-write expiration FIFO.  Likewise, when changing from a write batch to
-a read batch, scheduler begins the elevator from the first entry
-on the read expiration FIFO.
-
-4. Read anticipation.
-
-Read anticipation occurs only when scheduling a read batch.
-This implementation of read anticipation allows only one read request
-to be dispatched to the disk controller at a time.  In
-contrast, many write requests may be dispatched to the disk controller
-at a time during a write batch.  It is this characteristic that can make
-the anticipatory scheduler perform anomalously with controllers supporting
-TCQ, or with hardware striped RAID devices. Setting the antic_expire
-queue parameter (see below) to zero disables this behavior, and the 
-anticipatory scheduler behaves essentially like the deadline scheduler.
-
-When read anticipation is enabled (antic_expire is not zero), reads
-are dispatched to the disk controller one at a time.
-At the end of each read request, the IO scheduler examines its next
-candidate read request from its sorted read list.  If that next request
-is from the same process as the request that just completed,
-or if the next request in the queue is "very close" to the
-just completed request, it is dispatched immediately.  Otherwise,
-statistics (average think time, average seek distance) on the process
-that submitted the just completed request are examined.  If it seems
-likely that that process will submit another request soon, and that
-request is likely to be near the just completed request, then the IO
-scheduler will stop dispatching more read requests for up to (antic_expire)
-milliseconds, hoping that process will submit a new request near the one
-that just completed.  If such a request is made, then it is dispatched
-immediately.  If the antic_expire wait time expires, then the IO scheduler
-will dispatch the next read request from the sorted read queue.
-
-To decide whether an anticipatory wait is worthwhile, the scheduler
-maintains statistics for each process that can be used to compute
-mean "think time" (the time between read requests), and mean seek
-distance for that process.  One observation is that these statistics
-are associated with each process, but those statistics are not associated
-with a specific IO device.  So for example, if a process is doing IO
-on several file systems on separate devices, the statistics will be
-a combination of IO behavior from all those devices.
-
-
-Tuning the anticipatory IO scheduler
-------------------------------------
-When using 'as', the anticipatory IO scheduler there are 5 parameters under
-/sys/block/*/queue/iosched/. All are units of milliseconds.
-
-The parameters are:
-* read_expire
-    Controls how long until a read request becomes "expired". It also controls the
-    interval between which expired requests are served, so set to 50, a request
-    might take anywhere < 100ms to be serviced _if_ it is the next on the
-    expired list. Obviously request expiration strategies won't make the disk
-    go faster. The result basically equates to the timeslice a single reader
-    gets in the presence of other IO. 100*((seek time / read_expire) + 1) is
-    very roughly the % streaming read efficiency your disk should get with
-    multiple readers.
-
-* read_batch_expire
-    Controls how much time a batch of reads is given before pending writes are
-    served. A higher value is more efficient. This might be set below read_expire
-    if writes are to be given higher priority than reads, but reads are to be
-    as efficient as possible when there are no writes. Generally though, it
-    should be some multiple of read_expire.
-
-* write_expire, and
-* write_batch_expire are equivalent to the above, for writes.
-
-* antic_expire
-    Controls the maximum amount of time we can anticipate a good read (one
-    with a short seek distance from the most recently completed request) before
-    giving up. Many other factors may cause anticipation to be stopped early,
-    or some processes will not be "anticipated" at all. Should be a bit higher
-    for big seek time devices though not a linear correspondence - most
-    processes have only a few ms thinktime.
-
-In addition to the tunables above there is a read-only file named est_time
-which, when read, will show:
-
-    - The probability of a task exiting without a cooperating task
-      submitting an anticipated IO.
-
-    - The current mean think time.
-
-    - The seek distance used to determine if an incoming IO is better.
-
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 8d2158a1c6aa..6fab97ea7e6b 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5b5db085fbf0..2f93ac06c414 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -472,3 +472,52 @@ Why:	These two features use non-standard interfaces. There are the
 Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
+
+What:	usbvideo quickcam_messenger driver
+When:	2.6.35
+Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv06xx
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ov511 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/ov511.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	w9968cf v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/w9968cf*.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ovcamchip sensor framework
+When:	2.6.35
+Files:	drivers/media/video/ovcamchip/*
+Why:	Only used by obsoleted v4l1 drivers
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	stv680 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/stv680.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv0680
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	zc0301 v4l driver
+When:	2.6.35
+Files:	drivers/media/video/zc0301/*
+Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+	supports 2 USB-ID's (because it only supports a limited set of
+	sensors) wich are also supported by the gspca_zc3xx driver
+	(which supports 53 USB-ID's in total)
+Who:	Hans de Goede <hdegoede@redhat.com>
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index af6885c3c821..e1def1786e50 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -196,7 +196,7 @@ nobarrier		This also requires an IO stack which can support
 			also be used to enable or disable barriers, for
 			consistency with other ext4 mount options.
 
-inode_readahead=n	This tuning parameter controls the maximum
+inode_readahead_blks=n	This tuning parameter controls the maximum
 			number of inode table blocks that ext4's inode
 			table readahead algorithm will pre-read into
 			the buffer cache.  The default value is 32 blocks.
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index 4949fcaa6b6a..839efd8a8a8c 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -28,7 +28,7 @@ described in the man pages included in the package.
 Project web page:    http://www.nilfs.org/en/
 Download page:       http://www.nilfs.org/en/download.html
 Git tree web page:   http://www.nilfs.org/git/
-NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users
+List info:           http://vger.kernel.org/vger-lists.html#linux-nilfs
 
 Caveats
 =======
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 220cc6376ef8..0d07513a67a6 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -177,7 +177,6 @@ read the file /proc/PID/status:
   CapBnd: ffffffffffffffff
   voluntary_ctxt_switches:        0
   nonvoluntary_ctxt_switches:     1
-  Stack usage:    12 kB
 
 This shows you nearly the same information you would get if you viewed it with
 the ps  command.  In  fact,  ps  uses  the  proc  file  system  to  obtain its
@@ -231,7 +230,6 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
  Mems_allowed_list           Same as previous, but in "list format"
  voluntary_ctxt_switches     number of voluntary context switches
  nonvoluntary_ctxt_switches  number of non voluntary context switches
- Stack usage:                stack usage high water mark (round up to page size)
 ..............................................................................
 
 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821
new file mode 100644
index 000000000000..ced8359c50f8
--- /dev/null
+++ b/Documentation/hwmon/amc6821
@@ -0,0 +1,102 @@
+Kernel driver amc6821
+=====================
+
+Supported chips:
+	Texas Instruments AMC6821
+	Prefix: 'amc6821'
+	Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+	Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
+
+Authors:
+	Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
+
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments amc6821 chip.
+The chip has one on-chip and one remote temperature sensor and one pwm fan
+regulator.
+The pwm can be controlled either from software or automatically.
+
+The driver provides the following sensor accesses in sysfs:
+
+temp1_input		ro	on-chip temperature
+temp1_min		rw	"
+temp1_max		rw	"
+temp1_crit	 	rw	"
+temp1_min_alarm		ro	"
+temp1_max_alarm		ro	"
+temp1_crit_alarm	ro	"
+
+temp2_input		ro	remote temperature
+temp2_min		rw	"
+temp2_max		rw	"
+temp2_crit	 	rw	"
+temp2_min_alarm		ro	"
+temp2_max_alarm		ro	"
+temp2_crit_alarm	ro	"
+temp2_fault		ro	"
+
+fan1_input	 	ro	tachometer speed
+fan1_min		rw	"
+fan1_max		rw	"
+fan1_fault	 	ro	"
+fan1_div		rw	Fan divisor can be either 2 or 4.
+
+pwm1			rw	pwm1
+pwm1_enable		rw	regulator mode, 1=open loop, 2=fan controlled
+				by remote temperature, 3=fan controlled by
+				combination of the on-chip temperature and
+				remote-sensor temperature,
+pwm1_auto_channels_temp ro	1 if pwm_enable==2, 3 if pwm_enable==3
+pwm1_auto_point1_pwm	ro	Hardwired to 0, shared for both
+				temperature channels.
+pwm1_auto_point2_pwm	rw	This value is shared for both temperature
+				channels.
+pwm1_auto_point3_pwm	rw	Hardwired to 255, shared for both
+				temperature channels.
+
+temp1_auto_point1_temp	ro	Hardwired to temp2_auto_point1_temp
+				which is rw. Below this temperature fan stops.
+temp1_auto_point2_temp	rw	The low-temperature limit of the proportional
+				range. Below this temperature
+				pwm1 = pwm1_auto_point2_pwm. It can go from
+				0 degree C to 124 degree C in steps of
+				4 degree C. Read it out after writing to get
+				the actual value.
+temp1_auto_point3_temp	rw	Above this temperature fan runs at maximum
+				speed. It can go from temp1_auto_point2_temp.
+				It can only have certain discrete values
+				which depend on temp1_auto_point2_temp and
+				pwm1_auto_point2_pwm. Read it out after
+				writing to get the actual value.
+
+temp2_auto_point1_temp	rw	Must be between 0 degree C and 63 degree C and
+				it defines the passive cooling temperature.
+				Below this temperature the fan stops in
+				the closed loop mode.
+temp2_auto_point2_temp	rw	The low-temperature limit of the proportional
+				range. Below this temperature
+				pwm1 = pwm1_auto_point2_pwm. It can go from
+				0 degree C to 124 degree C in steps
+				of 4 degree C.
+
+temp2_auto_point3_temp	rw	Above this temperature fan runs at maximum
+				speed. It can only have certain discrete
+				values which depend on temp2_auto_point2_temp
+				and pwm1_auto_point2_pwm. Read it out after
+				writing to get actual value.
+
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the amc6821 correctly, you should
+load the module with: init=0.
+
+If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+init=1,
+pwminv: 0 default pwm output, 1 inverts pwm output.
+
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index a7a18d453a51..6526eee525a6 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -3,8 +3,8 @@ Kernel driver k10temp
 
 Supported chips:
 * AMD Family 10h processors:
-  Socket F: Quad-Core/Six-Core/Embedded Opteron
-  Socket AM2+: Opteron, Phenom (II) X3/X4
+  Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
+  Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
   Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
@@ -36,10 +36,15 @@ Description
 This driver permits reading of the internal temperature sensor of AMD
 Family 10h and 11h processors.
 
-All these processors have a sensor, but on older revisions of Family 10h
-processors, the sensor may return inconsistent values (erratum 319). The
-driver will refuse to load on these revisions unless you specify the
-"force=1" module parameter.
+All these processors have a sensor, but on those for Socket F or AM2+,
+the sensor may return inconsistent values (erratum 319).  The driver
+will refuse to load on these revisions unless you specify the "force=1"
+module parameter.
+
+Due to technical reasons, the driver can detect only the mainboard's
+socket type, not the processor's actual capabilities.  Therefore, if you
+are using an AM3 processor on an AM2+ mainboard, you can safely use the
+"force=1" parameter.
 
 There is one temperature measurement value, available as temp1_input in
 sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 947374977ca5..35cf64d4436d 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -56,10 +56,11 @@ Following this convention is good because:
 (5) When following the convention, the driver code can use generic
     code to copy the parameters between user and kernel space.
 
-This table lists ioctls visible from user land for Linux/i386.  It contains
-most drivers up to 2.3.14, but I know I am missing some.
+This table lists ioctls visible from user land for Linux/x86.  It contains
+most drivers up to 2.6.31, but I know I am missing some.  There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
 
-Code	Seq#	Include File		Comments
+Code  Seq#(hex)	Include File		Comments
 ========================================================
 0x00	00-1F	linux/fs.h		conflict!
 0x00	00-1F	scsi/scsi_ioctl.h	conflict!
@@ -69,119 +70,228 @@ Code	Seq#	Include File		Comments
 0x03	all	linux/hdreg.h
 0x04	D2-DC	linux/umsdos_fs.h	Dead since 2.6.11, but don't reuse these.
 0x06	all	linux/lp.h
-0x09	all	linux/md.h
+0x09	all	linux/raid/md_u.h
+0x10	00-0F	drivers/char/s390/vmcp.h
 0x12	all	linux/fs.h
 		linux/blkpg.h
 0x1b	all	InfiniBand Subsystem	<http://www.openib.org/>
 0x20	all	drivers/cdrom/cm206.h
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
+'$'	00-0F	linux/perf_counter.h, linux/perf_event.h
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2'	01-04	linux/i2o.h
+'3'	00-0F	drivers/s390/char/raw3270.h	conflict!
+'3'	00-1F	linux/suspend_ioctls.h	conflict!
+		and kernel/power/user.c
 '8'	all				SNP8023 advanced NIC card
 					<mailto:mcr@solidum.com>
-'A'	00-1F	linux/apm_bios.h
+'@'	00-0F	linux/radeonfb.h	conflict!
+'@'	00-0F	drivers/video/aty/aty128fb.c	conflict!
+'A'	00-1F	linux/apm_bios.h	conflict!
+'A'	00-0F	linux/agpgart.h		conflict!
+		and drivers/char/agp/compat_ioctl.h
+'A'	00-7F	sound/asound.h		conflict!
+'B'	00-1F	linux/cciss_ioctl.h	conflict!
+'B'	00-0F	include/linux/pmu.h	conflict!
 'B'	C0-FF				advanced bbus
 					<mailto:maassen@uni-freiburg.de>
-'C'	all	linux/soundcard.h
+'C'	all	linux/soundcard.h	conflict!
+'C'	01-2F	linux/capi.h		conflict!
+'C'	F0-FF	drivers/net/wan/cosa.h	conflict!
 'D'	all	arch/s390/include/asm/dasd.h
-'E'	all	linux/input.h
-'F'	all	linux/fb.h
-'H'	all	linux/hiddev.h
-'I'	all	linux/isdn.h
+'D'	40-5F	drivers/scsi/dpt/dtpi_ioctl.h
+'D'	05	drivers/scsi/pmcraid.h
+'E'	all	linux/input.h		conflict!
+'E'	00-0F	xen/evtchn.h		conflict!
+'F'	all	linux/fb.h		conflict!
+'F'	01-02	drivers/scsi/pmcraid.h	conflict!
+'F'	20	drivers/video/fsl-diu-fb.h	conflict!
+'F'	20	drivers/video/intelfb/intelfb.h	conflict!
+'F'	20	linux/ivtvfb.h		conflict!
+'F'	20	linux/matroxfb.h	conflict!
+'F'	20	drivers/video/aty/atyfb_base.c	conflict!
+'F'	00-0F	video/da8xx-fb.h	conflict!
+'F'	80-8F	linux/arcfb.h		conflict!
+'F'	DD	video/sstfb.h		conflict!
+'G'	00-3F	drivers/misc/sgi-gru/grulib.h	conflict!
+'G'	00-0F	linux/gigaset_dev.h	conflict!
+'H'	00-7F	linux/hiddev.h		conflict!
+'H'	00-0F	linux/hidraw.h		conflict!
+'H'	00-0F	sound/asound.h		conflict!
+'H'	20-40	sound/asound_fm.h	conflict!
+'H'	80-8F	sound/sfnt_info.h	conflict!
+'H'	10-8F	sound/emu10k1.h		conflict!
+'H'	10-1F	sound/sb16_csp.h	conflict!
+'H'	10-1F	sound/hda_hwdep.h	conflict!
+'H'	40-4F	sound/hdspm.h		conflict!
+'H'	40-4F	sound/hdsp.h		conflict!
+'H'	90	sound/usb/usx2y/usb_stream.h
+'H'	C0-F0	net/bluetooth/hci.h	conflict!
+'H'	C0-DF	net/bluetooth/hidp/hidp.h	conflict!
+'H'	C0-DF	net/bluetooth/cmtp/cmtp.h	conflict!
+'H'	C0-DF	net/bluetooth/bnep/bnep.h	conflict!
+'I'	all	linux/isdn.h		conflict!
+'I'	00-0F	drivers/isdn/divert/isdn_divert.h	conflict!
+'I'	40-4F	linux/mISDNif.h		conflict!
 'J'	00-1F	drivers/scsi/gdth_ioctl.h
 'K'	all	linux/kd.h
-'L'	00-1F	linux/loop.h
-'L'	20-2F	driver/usb/misc/vstusb.h
+'L'	00-1F	linux/loop.h		conflict!
+'L'	10-1F	drivers/scsi/mpt2sas/mpt2sas_ctl.h	conflict!
+'L'	20-2F	linux/usb/vstusb.h
 'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
 					<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M'	all	linux/soundcard.h
+'M'	all	linux/soundcard.h	conflict!
+'M'	01-16	mtd/mtd-abi.h		conflict!
+		and drivers/mtd/mtdchar.c
+'M'	01-03	drivers/scsi/megaraid/megaraid_sas.h
+'M'	00-0F	drivers/video/fsl-diu-fb.h	conflict!
 'N'	00-1F	drivers/usb/scanner.h
-'O'     00-02   include/mtd/ubi-user.h UBI
-'P'	all	linux/soundcard.h
+'O'     00-06   mtd/ubi-user.h		UBI
+'P'	all	linux/soundcard.h	conflict!
+'P'	60-6F	sound/sscape_ioctl.h	conflict!
+'P'	00-0F	drivers/usb/class/usblp.c	conflict!
 'Q'	all	linux/soundcard.h
-'R'	00-1F	linux/random.h
+'R'	00-1F	linux/random.h		conflict!
+'R'	01	linux/rfkill.h		conflict!
+'R'	01-0F	media/rds.h		conflict!
+'R'	C0-DF	net/bluetooth/rfcomm.h
 'S'	all	linux/cdrom.h		conflict!
 'S'	80-81	scsi/scsi_ioctl.h	conflict!
 'S'	82-FF	scsi/scsi.h		conflict!
+'S'	00-7F	sound/asequencer.h	conflict!
 'T'	all	linux/soundcard.h	conflict!
+'T'	00-AF	sound/asound.h		conflict!
 'T'	all	arch/x86/include/asm/ioctls.h	conflict!
-'U'	00-EF	linux/drivers/usb/usb.h
-'V'	all	linux/vt.h
+'T'	C0-DF	linux/if_tun.h		conflict!
+'U'	all	sound/asound.h		conflict!
+'U'	00-0F	drivers/media/video/uvc/uvcvideo.h	conflict!
+'U'	00-CF	linux/uinput.h		conflict!
+'U'	00-EF	linux/usbdevice_fs.h
+'U'	C0-CF	drivers/bluetooth/hci_uart.h
+'V'	all	linux/vt.h		conflict!
+'V'	all	linux/videodev2.h	conflict!
+'V'	C0	linux/ivtvfb.h		conflict!
+'V'	C0	linux/ivtv.h		conflict!
+'V'	C0	media/davinci/vpfe_capture.h	conflict!
+'V'	C0	media/si4713.h		conflict!
+'V'	C0-CF	drivers/media/video/mxb.h	conflict!
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!
-'X'	all	linux/xfs_fs.h
+'W'	00-3F	sound/asound.h		conflict!
+'X'	all	fs/xfs/xfs_fs.h		conflict!
+		and fs/xfs/linux-2.6/xfs_ioctl32.h
+		and include/linux/falloc.h
+		and linux/fs.h
+'X'	all	fs/ocfs2/ocfs_fs.h	conflict!
+'X'	01	linux/pktcdvd.h		conflict!
 'Y'	all	linux/cyclades.h
-'['	00-07	linux/usb/usbtmc.h	USB Test and Measurement Devices
+'Z'	14-15	drivers/message/fusion/mptctl.h
+'['	00-07	linux/usb/tmc.h		USB Test and Measurement Devices
 					<mailto:gregkh@suse.de>
-'a'	all				ATM on linux
+'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
 					<http://lrcwww.epfl.ch/linux-atm/magic.html>
-'b'	00-FF				bit3 vme host bridge
+'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:natalia@nikhefk.nikhef.nl>
+'b'	00-0F	media/bt819.h		conflict!
+'c'	all	linux/cm4000_cs.h	conflict!
 'c'	00-7F	linux/comstats.h	conflict!
 'c'	00-7F	linux/coda.h		conflict!
-'c'	80-9F	arch/s390/include/asm/chsc.h
-'c'	A0-AF   arch/x86/include/asm/msr.h
+'c'	00-1F	linux/chio.h		conflict!
+'c'	80-9F	arch/s390/include/asm/chsc.h	conflict!
+'c'	A0-AF   arch/x86/include/asm/msr.h	conflict!
 'd'	00-FF	linux/char/drm/drm/h	conflict!
+'d'	02-40	pcmcia/ds.h		conflict!
+'d'	10-3F	drivers/media/video/dabusb.h	conflict!
+'d'	C0-CF	drivers/media/video/saa7191.h	conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
-'e'	00-1F	net/irda/irtty.h	conflict!
-'f'	00-1F	linux/ext2_fs.h
-'h'	00-7F				Charon filesystem
+'e'	00-1F	drivers/net/irda/irtty-sir.h	conflict!
+'f'	00-1F	linux/ext2_fs.h		conflict!
+'f'	00-1F	linux/ext3_fs.h		conflict!
+'f'	00-0F	fs/jfs/jfs_dinode.h	conflict!
+'f'	00-0F	fs/ext4/ext4.h		conflict!
+'f'	00-0F	linux/fs.h		conflict!
+'f'	00-0F	fs/ocfs2/ocfs2_fs.h	conflict!
+'g'	00-0F	linux/usb/gadgetfs.h
+'g'	20-2F	linux/usb/g_printer.h
+'h'	00-7F				conflict! Charon filesystem
 					<mailto:zapman@interlan.net>
-'i'	00-3F	linux/i2o.h
+'h'	00-1F	linux/hpet.h		conflict!
+'i'	00-3F	linux/i2o-dev.h		conflict!
+'i'	0B-1F	linux/ipmi.h		conflict!
+'i'	80-8F	linux/i8k.h
 'j'	00-3F	linux/joystick.h
+'k'	00-0F	linux/spi/spidev.h	conflict!
+'k'	00-05	video/kyro.h		conflict!
 'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
 					<http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:
 					<http://sourceforge.net/projects/linux-udf/>
-'m'	00-09	linux/mmtimer.h
+'m'	00-09	linux/mmtimer.h		conflict!
 'm'	all	linux/mtio.h		conflict!
 'm'	all	linux/soundcard.h	conflict!
 'm'	all	linux/synclink.h	conflict!
+'m'	00-19	drivers/message/fusion/mptctl.h	conflict!
+'m'	00	drivers/scsi/megaraid/megaraid_ioctl.h	conflict!
 'm'	00-1F	net/irda/irmod.h	conflict!
-'n'	00-7F	linux/ncp_fs.h
+'n'	00-7F	linux/ncp_fs.h and fs/ncpfs/ioctl.c
 'n'	80-8F	linux/nilfs2_fs.h	NILFS2
-'n'	E0-FF	video/matrox.h          matroxfb
+'n'	E0-FF	linux/matroxfb.h	matroxfb
 'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
-'o'     00-03   include/mtd/ubi-user.h  conflict! (OCFS2 and UBI overlaps)
-'o'     40-41   include/mtd/ubi-user.h  UBI
-'o'     01-A1   include/linux/dvb/*.h DVB
+'o'     00-03   mtd/ubi-user.h		conflict! (OCFS2 and UBI overlaps)
+'o'     40-41   mtd/ubi-user.h		UBI
+'o'     01-A1   linux/dvb/*.h		DVB
 'p'	00-0F	linux/phantom.h		conflict! (OpenHaptics needs this)
+'p'	00-1F	linux/rtc.h		conflict!
 'p'	00-3F	linux/mc146818rtc.h	conflict!
 'p'	40-7F	linux/nvram.h
-'p'	80-9F				user-space parport</