Merge tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There have been little changes in ALSA core stuff, but ASoC core still
  kept rolling for the continued restructuring. The rest are lots of
  small driver-specific changes and some minor API updates. Here are
  highlights:

  General:
  - Appropriate fall-through annotations everywhere
  - Some code cleanup in memalloc code, handling non-cacahed pages more
    commonly in the helper
  - Deployment of SNDRV_PCM_INFO_SYNC_APPLPTR flag consistently

  Drivers:
  - More HD-audio CA0132 codec improvement for supporting other Creative
    boards
  - Plumbing legacy HD-audio codecs as ASoC BE on Intel SST; this will
    give move support of existing HD-audio devices with DSP
  - A few device-specific HD-audio quirks as usual
  - New quirk for RME CC devices and correction for B&W PX for USB-audio
  - FireWire: code refactoring including devres usages

  ASoC Core:
  - Continued componentization works; it's almost done!
  - A bunch of new for_each_foo macros
  - Cleanups and fixes in DAPM code

  ASoC Drivers:
  - MCLK support for several different devices, including CS42L51, STM32
    SAI, and MAX98373
  - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
    MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
    TI PCM3060"

* tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
  ASoC: stm32: sai: fix master clock naming
  ASoC: stm32: add clock dependency for sai
  ALSA: hda/ca0132 - Actually fix microphone issue
  ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks
  ASoC: wm2000: Remove wm2000_read helper function
  ASoC: cs42l51: fix mclk support
  ASoC: wm_adsp: Log addresses as 8 digits in wm_adsp_buffer_populate
  ASoC: wm_adsp: Rename memory fields in wm_adsp_buffer
  ASoC: cs42l51: add mclk support
  ASoC: stm32: sai: set sai as mclk clock provider
  ASoC: dt-bindings: add mclk support to cs42l51
  ASoC: dt-bindings: add mclk provider support to stm32 sai
  ASoC: soc-core: fix trivial checkpatch issues
  ASoC: dapm: Add support for hw_free on CODEC to CODEC links
  ASoC: Intel: kbl_da7219_max98927: minor white space clean up
  ALSA: i2c/cs8427: Fix int to char conversion
  ALSA: doc: Brush up the old writing-an-alsa-driver
  ASoC: rsnd: tidyup SSICR::SWSP for TDM
  ASoC: rsnd: enable TDM settings for SSI parent
  ASoC: pcm3168a: add hw constraint for capture channel
  ...

19 files changed, 387 insertions, 170 deletions

diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
new file mode 100644
index 000000000000..e79aeef73f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
@@ -0,0 +1,54 @@
+Analog Devices ADAU1977/ADAU1978/ADAU1979
+
+Datasheets:
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+This driver supports both the I2C and SPI bus.
+
+Required properties:
+ - compatible: Should contain one of the following:
+               "adi,adau1977"
+               "adi,adau1978"
+               "adi,adau1979"
+
+ - AVDD-supply: analog power supply for the device, please consult
+                Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+ - reset-gpio:  the reset pin for the chip, for more details consult
+                Documentation/devicetree/bindings/gpio/gpio.txt
+
+ - DVDD-supply: supply voltage for the digital core, please consult
+                Documentation/devicetree/bindings/regulator/regulator.txt
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg:         The i2c address. Value depends on the state of ADDR0
+                and ADDR1, as wired in hardware.
+
+Examples:
+
+	adau1977_spi: adau1977@0 {
+		compatible = "adi,adau1977";
+		spi-max-frequency = <600000>;
+
+		AVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator_digital>;
+
+		reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};
+
+	adau1977_i2c: adau1977@11 {
+		compatible = "adi,adau1977";
+		reg = <0x11>;
+
+		AVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator_digital>;
+
+		reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
new file mode 100644
index 000000000000..5672d0bc5b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
@@ -0,0 +1,24 @@
+* Amlogic Audio PDM input
+
+Required properties:
+- compatible: 'amlogic,axg-pdm'
+- reg: physical base address of the controller and length of memory
+       mapped region.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+  * "pclk"   : peripheral clock.
+  * "dclk"   : pdm digital clock
+  * "sysclk" : dsp system clock
+- #sound-dai-cells: must be 0.
+
+Example of PDM on the A113 SoC:
+
+pdm: audio-controller@ff632000 {
+	compatible = "amlogic,axg-pdm";
+	reg = <0x0 0xff632000 0x0 0x34>;
+	#sound-dai-cells = <0>;
+	clocks = <&clkc_audio AUD_CLKID_PDM>,
+		 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+		 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+	clock-names = "pclk", "dclk", "sysclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
new file mode 100644
index 000000000000..4b5de33ce377
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l51.txt
@@ -0,0 +1,17 @@
+CS42L51 audio CODEC
+
+Optional properties:
+
+  - clocks : a list of phandles + clock-specifiers, one for each entry in
+    clock-names
+
+  - clock-names : must contain "MCLK"
+
+Example:
+
+cs42l51: cs42l51@4a {
+	compatible = "cirrus,cs42l51";
+	reg = <0x4a>;
+	clocks = <&mclk_prov>;
+	clock-names = "MCLK";
+};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98088.txt b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
new file mode 100644
index 000000000000..da764d913319
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
@@ -0,0 +1,23 @@
+MAX98088 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible: "maxim,max98088" or "maxim,max98089".
+- reg: The I2C address of the device.
+
+Optional properties:
+
+- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
+  "consumer" for more information.
+- clock-names: must be set to "mclk"
+
+Example:
+
+max98089: codec@10 {
+	compatible = "maxim,max98089";
+	reg = <0x10>;
+	clocks = <&clks IMX6QDL_CLK_CKO2>;
+	clock-names = "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
new file mode 100644
index 000000000000..912f8fae11c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
@@ -0,0 +1,23 @@
+Mikroe-PROTO audio board
+
+Required properties:
+  - compatible: "mikroe,mikroe-proto"
+  - dai-format: Must be "i2s".
+  - i2s-controller: The phandle of the I2S controller.
+  - audio-codec: The phandle of the WM8731 audio codec.
+Optional properties:
+  - model: The user-visible name of this sound complex.
+  - bitclock-master: Indicates dai-link bit clock master; for details see simple-card.txt (1).
+  - frame-master: Indicates dai-link frame master; for details see simple-card.txt (1).
+
+(1) : There must be the same master for both bit and frame clocks.
+
+Example:
+	sound {
+		compatible = "mikroe,mikroe-proto";
+		model = "wm8731 @ sama5d2_xplained";
+		i2s-controller = <&i2s0>;
+		audio-codec = <&wm8731>;
+		dai-format = "i2s";
+        };
+};
diff --git a/Documentation/devicetree/bindings/sound/nau8822.txt b/Documentation/devicetree/bindings/sound/nau8822.txt
new file mode 100644
index 000000000000..a471d162d4e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8822.txt
@@ -0,0 +1,16 @@
+NAU8822 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8822"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8822@1a {
+	compatible = "nuvoton,nau8822";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt
new file mode 100644
index 000000000000..90fcb8523099
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm3060.txt
@@ -0,0 +1,17 @@
+PCM3060 audio CODEC
+
+This driver supports both I2C and SPI.
+
+Required properties:
+
+- compatible: "ti,pcm3060"
+
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
+
+Examples:
+
+	pcm3060: pcm3060@46 {
+		 compatible = "ti,pcm3060";
+		 reg = <0x46>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index a8179409c194..d74888b9f1bb 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -49,7 +49,7 @@ configuration of each dai. Must contain the following properties.
 	Usage: required for mi2s interface
 	Value type: <prop-encoded-array>
 	Definition: Must be list of serial data lines used by this dai.
-	should be one or more of the 1-4 sd lines.
+	should be one or more of the 0-3 sd lines.
 
  - qcom,tdm-sync-mode:
 	Usage: required for tdm interface
@@ -137,42 +137,42 @@ q6afe@4 {
 
 		prim-mi2s-rx@16 {
 			reg = <16>;
-			qcom,sd-lines = <1 3>;
+			qcom,sd-lines = <0 2>;
 		};
 
 		prim-mi2s-tx@17 {
 			reg = <17>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 
 		sec-mi2s-rx@18 {
 			reg = <18>;
-			qcom,sd-lines = <1 4>;
+			qcom,sd-lines = <0 3>;
 		};
 
 		sec-mi2s-tx@19 {
 			reg = <19>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 
 		tert-mi2s-rx@20 {
 			reg = <20>;
-			qcom,sd-lines = <2 4>;
+			qcom,sd-lines = <1 3>;
 		};
 
 		tert-mi2s-tx@21 {
 			reg = <21>;
-			qcom,sd-lines = <1>;
+			qcom,sd-lines = <0>;
 		};
 
 		quat-mi2s-rx@22 {
 			reg = <22>;
-			qcom,sd-lines = <1>;
+			qcom,sd-lines = <0>;
 		};
 
 		quat-mi2s-tx@23 {
 			reg = <23>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 9e764270c36b..d92b705e7917 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -340,10 +340,12 @@ Required properties:
 - compatible			: "renesas,rcar_sound-<soctype>", fallbacks
 				  "renesas,rcar_sound-gen1" if generation1, and
 				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
-				  "renesas,rcar_sound-gen3" if generation3
+				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
 				  Examples with soctypes are:
 				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
+				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
+				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
@@ -353,6 +355,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
 				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
 				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
+				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt
index 255de3ae5b2f..52265fb757c5 100644
--- a/Documentation/devicetree/bindings/sound/st,sta32x.txt
+++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt
@@ -19,6 +19,10 @@ Required properties:
 
 Optional properties:
 
+  - clocks, clock-names: Clock specifier for XTI input clock.
+	If specified, the clock will be enabled when the codec is probed,
+	and disabled when it is removed. The 'clock-names' must be set to 'xti'.
+
   -  st,output-conf: number, Selects the output configuration:
 	0: 2-channel (full-bridge) power, 2-channel data-out
 	1: 2 (half-bridge). 1 (full-bridge) on-board power
@@ -39,6 +43,9 @@ Optional properties:
   -  st,thermal-warning-recover:
 	If present, thermal warning recovery is enabled.
 
+  - st,fault-detect-recovery:
+	If present, fault detect recovery is enabled.
+
   -  st,thermal-warning-adjustment:
 	If present, thermal warning adjustment is enabled.
 
@@ -76,6 +83,8 @@ Example:
 codec: sta32x@38 {
 	compatible = "st,sta32x";
 	reg = <0x1c>;
+	clocks = <&clock>;
+	clock-names = "xti";
 	reset-gpios = <&gpio1 19 0>;
 	power-down-gpios = <&gpio1 16 0>;
 	st,output-conf = /bits/ 8  <0x3>;	// set output to 2-channel
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index 3a3fc506e43a..3f4467ff0aa2 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -31,7 +31,11 @@ SAI subnodes required properties:
   - reg: Base address and size of SAI sub-block register set.
   - clocks: Must contain one phandle and clock specifier pair
 	for sai_ck which feeds the internal clock generator.
+	If the SAI shares a master clock, with another SAI set as MCLK
+	clock provider, SAI provider phandle must be specified here.
   - clock-names: Must contain "sai_ck".
+	Must also contain "MCLK", if SAI shares a master clock,
+	with a SAI set as MCLK clock provider.
   - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
   - dma-names: identifier string for each DMA request line
 	"tx": if sai sub-block is configured as playback DAI
@@ -51,6 +55,9 @@ SAI subnodes Optional properties:
 	configured according to protocol defined in related DAI link node,
 	such as i2s, left justified, right justified, dsp and pdm protocols.
 	Note: ac97 protocol is not supported by SAI driver
+   - #clock-cells: should be 0. This property must be present if the SAI device
+	is a master clock provider, according to clocks bindings, described in
+	Documentation/devicetree/bindings/clock/clock-bindings.txt.
 
 The device node should contain one 'port' child node with one child 'endpoint'
 node, according to the bindings defined in Documentation/devicetree/bindings/
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index b9d50d6cdef3..61e71c1729e0 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -10,6 +10,7 @@ Required properties:
    - "allwinner,sun6i-a31-i2s"
    - "allwinner,sun8i-a83t-i2s"
    - "allwinner,sun8i-h3-i2s"
+   - "allwinner,sun50i-a64-codec-i2s"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: should contain the I2S interrupt.
@@ -26,6 +27,7 @@ Required properties for the following compatibles:
 	- "allwinner,sun6i-a31-i2s"
 	- "allwinner,sun8i-a83t-i2s"
 	- "allwinner,sun8i-h3-i2s"
+	- "allwinner,sun50i-a64-codec-i2s"
 - resets: phandle to the reset line for this codec
 
 Example:
diff --git a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
new file mode 100644
index 000000000000..4f8ad0e04d20
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
@@ -0,0 +1,12 @@
+* Allwinner A64 Codec Analog Controls
+
+Required properties:
+- compatible: must be one of the following compatibles:
+		- "allwinner,sun50i-a64-codec-analog"
+- reg: must contain the registers location and length
+
+Example:
+	codec_analog: codec-analog@1f015c0 {
+		compatible = "allwinner,sun50i-a64-codec-analog";
+		reg = <0x01f015c0 0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
index 3ed8359144d3..21ab45bc7e8f 100644
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ b/Documentation/devicetree/bindings/sound/ts3a227e.txt
@@ -14,7 +14,7 @@ Required properties:
 
 Optional properies:
  - ti,micbias:   Intended MICBIAS voltage (datasheet section 9.6.7).
-      Select 0/1/2/3/4/5/6/7 to specify MACBIAS voltage
+      Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage
       2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
       Default value is "1" (2.2V).
 
diff --git a/Documentation/devicetree/bindings/sound/wm8782.txt b/Documentation/devicetree/bindings/sound/wm8782.txt
new file mode 100644
index 000000000000..256cdec6ec4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8782.txt
@@ -0,0 +1,17 @@
+WM8782 stereo ADC
+
+This device does not have any control interface or reset pins.
+
+Required properties:
+
+ - compatible  : "wlf,wm8782"
+ - Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V)
+ - Vdd-supply  : phandle to a regulator for the digital power supply (2.7V - 3.6V)
+
+Example:
+
+wm8782: stereo-adc {
+	compatible = "wlf,wm8782";
+	Vdda-supply = <&vdda_supply>;
+	Vdd-supply = <&vdd_supply>;
+};
diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
index 763a2808a95c..69c934aec13b 100644
--- a/Documentation/devicetree/bindings/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/trivial-devices.txt
@@ -35,7 +35,6 @@ at,24c08		i2c serial eeprom  (24cxx)
 atmel,at97sc3204t	i2c trusted platform module (TPM)
 capella,cm32181		CM32181: Ambient Light Sensor
 capella,cm3232		CM3232: Ambient Light Sensor
-cirrus,cs42l51		Cirrus Logic CS42L51 audio codec
 dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
 dallas,ds1631		High-Precision Digital Thermometer
 dallas,ds1672		Dallas DS1672 Real-time Clock
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2c3fc512e746..f26bf667e530 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -235,6 +235,7 @@ micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 microcrystal	Micro Crystal AG
 micron	Micron Technology Inc.
+mikroe		MikroElektronika d.o.o.
 minix	MINIX Technology Ltd.
 miramems	MiraMEMS Sensing Technology Co., Ltd.
 mitsubishi	Mitsubishi Electric Corporation
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index e06238131f77..368a07a165f5 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -309,6 +309,8 @@ asus-nx50
     ASUS Nx50 fixups
 asus-nx51
     ASUS Nx51 fixups
+asus-g751
+    ASUS G751 fixups
 alc891-headset
     Headset mode support on ALC891
 alc891-headset-multi
diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index a0b268466cb1..b37234afdfa1 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3,8 +3,6 @@ Writing an ALSA Driver
 ======================
 
 :Author: Takashi Iwai <tiwai@suse.de>
-:Date:   Oct 15, 2007
-:Edition: 0.3.7
 
 Preface
 =======
@@ -21,11 +19,6 @@ explain the general topic of linux kernel coding and doesn't cover
 low-level driver implementation details. It only describes the standard
 way to write a PCI sound driver on ALSA.
 
-If you are already familiar with the older ALSA ver.0.5.x API, you can
-check the drivers such as ``sound/pci/es1938.c`` or
-``sound/pci/maestro3.c`` which have also almost the same code-base in
-the ALSA 0.5.x tree, so you can compare the differences.
-
 This document is still a draft version. Any feedback and corrections,
 please!!
 
@@ -35,24 +28,7 @@ File Tree Structure
 General
 -------
 
-The ALSA drivers are provided in two ways.
-
-One is the trees provided as a tarball or via cvs from the ALSA's ftp
-site, and another is the 2.6 (or later) Linux kernel tree. To
-synchronize both, the ALSA driver tree is split into two different
-trees: alsa-kernel and alsa-driver. The former contains purely the
-source code for the Linux 2.6 (or later) tree. This tree is designed
-only for compilation on 2.6 or later environment. The latter,
-alsa-driver, contains many subtle files for compiling ALSA drivers
-outside of the Linux kernel tree, wrapper functions for older 2.2 and
-2.4 kernels, to adapt the latest kernel API, and additional drivers
-which are still in development or in tests. The drivers in alsa-driver
-tree will be moved to alsa-kernel (and eventually to the 2.6 kernel
-tree) when they are finished and confirmed to work fine.
-
-The file tree structure of ALSA driver is depicted below. Both
-alsa-kernel and alsa-driver have almost the same file structure, except
-for “core” directory. It's named as “acore” in alsa-driver tree.
+The file tree structure of ALSA driver is depicted below.
 
 ::
 
@@ -61,14 +37,11 @@ for “core” directory. It's named as “acore” in alsa-driver tree.
                             /oss
                             /seq
                                     /oss
-                                    /instr
-                    /ioctl32
                     /include
                     /drivers
                             /mpu401
                             /opl3
                     /i2c
-                            /l3
                     /synth
                             /emux
                     /pci
@@ -80,6 +53,7 @@ for “core” directory. It's named as “acore” in alsa-driver tree.
                     /sparc
                     /usb
                     /pcmcia /(cards)
+                    /soc
                     /oss
 
 
@@ -99,13 +73,6 @@ directory. The rawmidi OSS emulation is included in the ALSA rawmidi
 code since it's quite small. The sequencer code is stored in
 ``core/seq/oss`` directory (see `below <#core-seq-oss>`__).
 
-core/ioctl32
-~~~~~~~~~~~~
-
-This directory contains the 32bit-ioctl wrappers for 64bit architectures
-such like x86-64, ppc64 and sparc64. For 32bit and alpha architectures,
-these are not compiled.
-
 core/seq
 ~~~~~~~~
 
@@ -119,11 +86,6 @@ core/seq/oss
 
 This contains the OSS sequencer emulation codes.
 
-core/seq/instr
-~~~~~~~~~~~~~~
-
-This directory contains the modules for the sequencer instrument layer.
-
 include directory
 -----------------
 
@@ -161,11 +123,6 @@ Although there is a standard i2c layer on Linux, ALSA has its own i2c
 code for some cards, because the soundcard needs only a simple operation
 and the standard i2c API is too complicated for such a purpose.
 
-i2c/l3
-~~~~~~
-
-This is a sub-directory for ARM L3 i2c.
-
 synth directory
 ---------------
 
@@ -209,11 +166,19 @@ The PCMCIA, especially PCCard drivers will go here. CardBus drivers will
 be in the pci directory, because their API is identical to that of
 standard PCI cards.
 
+soc directory
+-------------
+
+This directory contains the codes for ASoC (ALSA System on Chip)
+layer including ASoC core, codec and machine drivers.
+
 oss directory
 -------------
 
-The OSS/Lite source files are stored here in Linux 2.6 (or later) tree.
-In the ALSA driver tarball, this directory is empty, of course :)
+Here contains OSS/Lite codes.
+All codes have been deprecated except for dmasound on m68k as of
+writing this.
+
 
 Basic Flow for PCI Drivers
 ==========================
@@ -352,10 +317,8 @@ to details explained in the following section.
 
               /* (3) */
               err = snd_mychip_create(card, pci, &chip);
-              if (err < 0) {
-                      snd_card_free(card);
-                      return err;
-              }
+              if (err < 0)
+                      goto error;
 
               /* (4) */
               strcpy(card->driver, "My Chip");
@@ -368,22 +331,23 @@ to details explained in the following section.
 
               /* (6) */
               err = snd_card_register(card);
-              if (err < 0) {
-                      snd_card_free(card);
-                      return err;
-              }
+              if (err < 0)
+                      goto error;
 
               /* (7) */
               pci_set_drvdata(pci, card);
               dev++;
               return 0;
+
+      error:
+              snd_card_free(card);
+	      return err;
       }
 
       /* destructor -- see the "Destructor" sub-section */
       static void snd_mychip_remove(struct pci_dev *pci)
       {
               snd_card_free(pci_get_drvdata(pci));
-              pci_set_drvdata(pci, NULL);
       }
 
 
@@ -445,14 +409,26 @@ In this part, the PCI resources are allocated.
   struct mychip *chip;
   ....
   err = snd_mychip_create(card, pci, &chip);
-  if (err < 0) {
-          snd_card_free(card);
-          return err;
-  }
+  if (err < 0)
+          goto error;
 
 The details will be explained in the section `PCI Resource
 Management`_.
 
+When something goes wrong, the probe function needs to deal with the
+error.  In this example, we have a single error handling path placed
+at the end of the function.
+
+::
+
+  error:
+          snd_card_free(card);
+	  return err;
+
+Since each component can be properly freed, the single
+:c:func:`snd_card_free()` call should suffice in most cases.
+
+
 4) Set the driver ID and name strings.
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -486,10 +462,8 @@ too.
 ::
 
   err = snd_card_register(card);
-  if (err < 0) {
-          snd_card_free(card);
-          return err;
-  }
+  if (err < 0)
+          goto error;
 
 Will be explained in the section `Management of Cards and
 Components`_, too.
@@ -513,14 +487,13 @@ The destructor, remove callback, simply releases the card instance. Then
 the ALSA middle layer will release all the attached components
 automatically.
 
-It would be typically like the following:
+It would be typically just :c:func:`calling snd_card_free()`:
 
 ::
 
   static void snd_mychip_remove(struct pci_dev *pci)
   {
           snd_card_free(pci_get_drvdata(pci));
-          pci_set_drvdata(pci, NULL);
   }
 
 
@@ -546,7 +519,7 @@ in the source file. If the code is split into several files, the files
 without module options don't need them.
 
 In addition to these headers, you'll need ``<linux/interrupt.h>`` for
-interrupt handling, and ``<asm/io.h>`` for I/O access. If you use the
+interrupt handling, and ``<linux/io.h>`` for I/O access. If you use the
 :c:func:`mdelay()` or :c:func:`udelay()` functions, you'll need
 to include ``<linux/delay.h>`` too.
 
@@ -720,6 +693,13 @@ function, which will call the real destructor.
 
 where :c:func:`snd_mychip_free()` is the real destructor.
 
+The demerit of this method is the obviously more amount of codes.
+The merit is, however, you can trigger the own callback at registering
+and disconnecting the card via setting in snd_device_ops.
+About the registering and disconnecting the card, see the subsections
+below.
+
+
 Registration and Release
 ------------------------
 
@@ -905,10 +885,8 @@ Resource Allocation
 -------------------
 
 The allocation of I/O ports and irqs is done via standard kernel
-functions. Unlike ALSA ver.0.5.x., there are no helpers for that. And
-these resources must be released in the destructor function (see below).
-Also, on ALSA 0.9.x, you don't need to allocate (pseudo-)DMA for PCI
-like in ALSA 0.5.x.
+functions.  These resources must be released in the destructor
+function (see below).
 
 Now assume that the PCI device has an I/O port with 8 bytes and an
 interrupt. Then :c:type:`struct mychip <mychip>` will have the
@@ -1064,7 +1042,8 @@ and the allocation would be like below:
 
 ::
 
-  if ((err = pci_request_regions(pci, "My Chip")) < 0) {
+  err = pci_request_regions(pci, "My Chip");
+  if (err < 0) {
           kfree(chip);
           return err;
   }
@@ -1086,6 +1065,21 @@ and the corresponding destructor would be:
           ....
   }
 
+Of course, a modern way with :c:func:`pci_iomap()` will make things a
+bit easier, too.
+
+::
+
+  err = pci_request_regions(pci, "My Chip");
+  if (err < 0) {
+          kfree(chip);
+          return err;
+  }
+  chip->iobase_virt = pci_iomap(pci, 0, 0);
+
+which is paired with :c:func:`pci_iounmap()` at destructor.
+
+
 PCI Entries
 -----------
 
@@ -1154,13 +1148,6 @@ And at last, the module entries:
 Note that these module entries are tagged with ``__init`` and ``__exit``
 prefixes.
 
-Oh, one thing was forgotten. If you have no exported symbols, you need
-to declare it in 2.2 or 2.4 kernels (it's not necessary in 2.6 kernels).
-
-::
-
-  EXPORT_NO_SYMBOLS;
-
 That's all!
 
 PCM Interface
@@ -2113,6 +2100,16 @@ non-contiguous buffers. The mmap calls this callback to get the page
 address. Some examples will be explained in the later section `Buffer
 and Memory Management`_, too.
 
+mmap calllback
+~~~~~~~~~~~~~~
+
+This is another optional callback for controlling mmap behavior.
+Once when defined, PCM core calls this callback when a page is
+memory-mapped instead of dealing via the standard helper.
+If you need special handling (due to some architecture or
+device-specific issues), implement everything here as you like.
+