Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and PHY updates from Greg KH:
 "Here is the big USB pull request for 4.18-rc1.

  Lots of stuff here, the highlights are:

   - phy driver updates and new additions

   - usual set of xhci driver updates

   - normal set of musb updates

   - gadget driver updates and new controllers

   - typec work, it's getting closer to getting fully out of the staging
     portion of the tree.

   - lots of minor cleanups and bugfixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"
  xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers
  xhci: Allow more than 32 quirks
  usb: xhci: force all memory allocations to node
  selftests: add test for USB over IP driver
  USB: typec: fsusb302: no need to check return value of debugfs_create_dir()
  USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions
  USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions
  USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions
  USB: dwc3: no need to check return value of debugfs_create functions
  USB: dwc2: no need to check return value of debugfs_create functions
  USB: core: no need to check return value of debugfs_create functions
  USB: chipidea: no need to check return value of debugfs_create functions
  USB: ehci-hcd: no need to check return value of debugfs_create functions
  USB: fhci-hcd: no need to check return value of debugfs_create functions
  USB: fotg210-hcd: no need to check return value of debugfs_create functions
  USB: imx21-hcd: no need to check return value of debugfs_create functions
  ...

12 files changed, 781 insertions, 32 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index c702c78f24d8..08d456e07b53 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -189,6 +189,28 @@ Description:
 		The file will read "hotplug", "wired" and "not used" if the
 		information is available, and "unknown" otherwise.
 
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/quirks
+Date:		May 2018
+Contact:	Nicolas Boichat <drinkcat@chromium.org>
+Description:
+		In some cases, we care about time-to-active for devices
+		connected on a specific port (e.g. non-standard USB port like
+		pogo pins), where the device to be connected is known in
+		advance, and behaves well according to the specification.
+		This attribute is a bit-field that controls the behavior of
+		a specific port:
+		 - Bit 0 of this field selects the "old" enumeration scheme,
+		   as it is considerably faster (it only causes one USB reset
+		   instead of 2).
+		   The old enumeration scheme can also be selected globally
+		   using /sys/module/usbcore/parameters/old_scheme_first, but
+		   it is often not desirable as the new scheme was introduced to
+		   increase compatibility with more devices.
+		 - Bit 1 reduces TRSTRCY to the 10 ms that are required by the
+		   USB 2.0 specification, instead of the 50 ms that are normally
+		   used to help make enumeration work better on some high speed
+		   devices.
+
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/over_current_count
 Date:		February 2018
 Contact:	Richard Leitner <richard.leitner@skidata.com>
@@ -236,3 +258,21 @@ Description:
 		Supported values are 0 - 15.
 		More information on how besl values map to microseconds can be found in
 		USB 2.0 ECN Errata for Link Power Management, section 4.10)
+
+What:		/sys/bus/usb/devices/.../rx_lanes
+Date:		March 2018
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		Number of rx lanes the device is using.
+		USB 3.2 adds Dual-lane support, 2 rx and 2 tx lanes over Type-C.
+		Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
+		direction. Devices before USB 3.2 are single lane (rx_lanes = 1)
+
+What:		/sys/bus/usb/devices/.../tx_lanes
+Date:		March 2018
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		Number of tx lanes the device is using.
+		USB 3.2 adds Dual-lane support, 2 rx and 2 tx -lanes over Type-C.
+		Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
+		direction. Devices before USB 3.2 are single lane (tx_lanes = 1)
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index f85ce9e327b9..5e23e22dce1b 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -1,3 +1,458 @@
+===== General Properties =====
+
+What:		/sys/class/power_supply/<supply_name>/manufacturer
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the name of the device manufacturer.
+
+		Access: Read
+		Valid values: Represented as string
+
+What:		/sys/class/power_supply/<supply_name>/model_name
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the name of the device model.
+
+		Access: Read
+		Valid values: Represented as string
+
+What:		/sys/class/power_supply/<supply_name>/serial_number
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the serial number of the device.
+
+		Access: Read
+		Valid values: Represented as string
+
+What:		/sys/class/power_supply/<supply_name>/type
+Date:		May 2010
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Describes the main type of the supply.
+
+		Access: Read
+		Valid values: "Battery", "UPS", "Mains", "USB"
+
+===== Battery Properties =====
+
+What:		/sys/class/power_supply/<supply_name>/capacity
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Fine grain representation of battery capacity.
+		Access: Read
+		Valid values: 0 - 100 (percent)
+
+What:		/sys/class/power_supply/<supply_name>/capacity_alert_max
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum battery capacity trip-wire value where the supply will
+		notify user-space of the event. This is normally used for the
+		battery discharging scenario where user-space needs to know the
+		battery has dropped to an upper level so it can take
+		appropriate action (e.g. warning user that battery level is
+		low).
+
+		Access: Read, Write
+		Valid values: 0 - 100 (percent)
+
+What:		/sys/class/power_supply/<supply_name>/capacity_alert_min
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum battery capacity trip-wire value where the supply will
+		notify user-space of the event. This is normally used for the
+		battery discharging scenario where user-space needs to know the
+		battery has dropped to a lower level so it can take
+		appropriate action (e.g. warning user that battery level is
+		critically low).
+
+		Access: Read, Write
+		Valid values: 0 - 100 (percent)
+
+What:		/sys/class/power_supply/<supply_name>/capacity_level
+Date:		June 2009
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Coarse representation of battery capacity.
+
+		Access: Read
+		Valid values: "Unknown", "Critical", "Low", "Normal", "High",
+			      "Full"
+
+What:		/sys/class/power_supply/<supply_name>/current_avg
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports an average IBAT current reading for the battery, over a
+		fixed period. Normally devices will provide a fixed interval in
+		which they average readings to smooth out the reported value.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/current_max
+Date:		October 2010
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the maximum IBAT current allowed into the battery.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/current_now
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports an instant, single IBAT current reading for the battery.
+		This value is not averaged/smoothed.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/charge_type
+Date:		July 2009
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Represents the type of charging currently being applied to the
+		battery.
+
+		Access: Read
+		Valid values: "Unknown", "N/A", "Trickle", "Fast"
+
+What:		/sys/class/power_supply/<supply_name>/charge_term_current
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the charging current value which is used to determine
+		when the battery is considered full and charging should end.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/health
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the health of the battery or battery side of charger
+		functionality.
+
+		Access: Read
+		Valid values: "Unknown", "Good", "Overheat", "Dead",
+			      "Over voltage", "Unspecified failure", "Cold",
+			      "Watchdog timer expire", "Safety timer expire"
+
+What:		/sys/class/power_supply/<supply_name>/precharge_current
+Date:		June 2017
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the charging current applied during pre-charging phase
+		for a battery charge cycle.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/present
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports whether a battery is present or not in the system.
+
+		Access: Read
+		Valid values:
+			0: Absent
+			1: Present
+
+What:		/sys/class/power_supply/<supply_name>/status
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Represents the charging status of the battery. Normally this
+		is read-only reporting although for some supplies this can be
+		used to enable/disable charging to the battery.
+
+		Access: Read, Write
+		Valid values: "Unknown", "Charging", "Discharging",
+			      "Not charging", "Full"
+
+What:		/sys/class/power_supply/<supply_name>/technology
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Describes the battery technology supported by the supply.
+
+		Access: Read
+		Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
+			      "NiCd", "LiMn"
+
+What:		/sys/class/power_supply/<supply_name>/temp
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the current TBAT battery temperature reading.
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_alert_max
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum TBAT temperature trip-wire value where the supply will
+		notify user-space of the event. This is normally used for the
+		battery charging scenario where user-space needs to know the
+		battery temperature has crossed an upper threshold so it can
+		take appropriate action (e.g. warning user that battery level is
+		critically high, and charging has stopped).
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_alert_min
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum TBAT temperature trip-wire value where the supply will
+		notify user-space of the event. This is normally used for the
+		battery charging scenario where user-space needs to know the
+		battery temperature has crossed a lower threshold so it can take
+		appropriate action (e.g. warning user that battery level is
+		high, and charging current has been reduced accordingly to
+		remedy the situation).
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_max
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the maximum allowed TBAT battery temperature for
+		charging.
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_min
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the minimum allowed TBAT battery temperature for
+		charging.
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/voltage_avg,
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports an average VBAT voltage reading for the battery, over a
+		fixed period. Normally devices will provide a fixed interval in
+		which they average readings to smooth out the reported value.
+
+		Access: Read
+		Valid values: Represented in microvolts
+
+What:		/sys/class/power_supply/<supply_name>/voltage_max,
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the maximum safe VBAT voltage permitted for the battery,
+		during charging.
+
+		Access: Read
+		Valid values: Represented in microvolts
+
+What:		/sys/class/power_supply/<supply_name>/voltage_min,
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the minimum safe VBAT voltage permitted for the battery,
+		during discharging.
+
+		Access: Read
+		Valid values: Represented in microvolts
+
+What:		/sys/class/power_supply/<supply_name>/voltage_now,
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports an instant, single VBAT voltage reading for the battery.
+		This value is not averaged/smoothed.
+
+		Access: Read
+		Valid values: Represented in microvolts
+
+===== USB Properties =====
+
+What: 		/sys/class/power_supply/<supply_name>/current_avg
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports an average IBUS current reading over a fixed period.
+		Normally devices will provide a fixed interval in which they
+		average readings to smooth out the reported value.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+
+What: 		/sys/class/power_supply/<supply_name>/current_max
+Date:		October 2010
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the maximum IBUS current the supply can support.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What: 		/sys/class/power_supply/<supply_name>/current_now
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the IBUS current supplied now. This value is generally
+		read-only reporting, unless the 'online' state of the supply
+		is set to be programmable, in which case this value can be set
+		within the reported min/max range.
+
+		Access: Read, Write
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/input_current_limit
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Details the incoming IBUS current limit currently set in the
+		supply. Normally this is configured based on the type of
+		connection made (e.g. A configured SDP should output a maximum
+		of 500mA so the input current limit is set to the same value).
+
+		Access: Read, Write
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/online,
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Indicates if VBUS is present for the supply. When the supply is
+		online, and the supply allows it, then it's possible to switch
+		between online states (e.g. Fixed -> Programmable for a PD_PPS
+		USB supply so voltage and current can be controlled).
+
+		Access: Read, Write
+		Valid values:
+			0: Offline
+			1: Online Fixed - Fixed Voltage Supply
+			2: Online Programmable - Programmable Voltage Supply
+
+What:		/sys/class/power_supply/<supply_name>/temp
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the current supply temperature reading. This would
+		normally be the internal temperature of the device itself (e.g
+		TJUNC temperature of an IC)
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_alert_max
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum supply temperature trip-wire value where the supply will
+		notify user-space of the event. This is normally used for the
+		charging scenario where user-space needs to know the supply
+		temperature has crossed an upper threshold so it can take
+		appropriate action (e.g. warning user that the supply
+		temperature is critically high, and charging has stopped to
+		remedy the situation).
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_alert_min
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum supply temperature trip-wire value where the supply will
+		notify user-space of the event. This is normally used for the
+		charging scenario where user-space needs to know the supply
+		temperature has crossed a lower threshold so it can take
+		appropriate action (e.g. warning user that the supply
+		temperature is high, and charging current has been reduced
+		accordingly to remedy the situation).
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_max
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the maximum allowed supply temperature for operation.
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_min
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the mainimum allowed supply temperature for operation.
+
+		Access: Read
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What: 		/sys/class/power_supply/<supply_name>/usb_type
+Date:		March 2018
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports what type of USB connection is currently active for
+		the supply, for example it can show if USB-PD capable source
+		is attached.
+
+		Access: Read-Only
+		Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
+			      "PD_DRP", "PD_PPS", "BrickID"
+
+What: 		/sys/class/power_supply/<supply_name>/voltage_max
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the maximum VBUS voltage the supply can support.
+
+		Access: Read
+		Valid values: Represented in microvolts
+
+What: 		/sys/class/power_supply/<supply_name>/voltage_min
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the minimum VBUS voltage the supply can support.
+
+		Access: Read
+		Valid values: Represented in microvolts
+
+What: 		/sys/class/power_supply/<supply_name>/voltage_now
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the VBUS voltage supplied now. This value is generally
+		read-only reporting, unless the 'online' state of the supply
+		is set to be programmable, in which case this value can be set
+		within the reported min/max range.
+
+		Access: Read, Write
+		Valid values: Represented in microvolts
+
+===== Device Specific Properties =====
+
 What:		/sys/class/power/ds2760-battery.*/charge_now
 Date:		May 2010
 KernelVersion:	2.6.35
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
new file mode 100644
index 000000000000..e7caefa0b9c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
@@ -0,0 +1,109 @@
+MediaTek XS-PHY binding
+--------------------------
+
+The XS-PHY controller supports physical layer functionality for USB3.1
+GEN2 controller on MediaTek SoCs.
+
+Required properties (controller (parent) node):
+ - compatible	: should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy",
+		  soc-model is the name of SoC, such as mt3611 etc;
+		  when using "mediatek,xsphy" compatible string, you need SoC specific
+		  ones in addition, one of:
+		  - "mediatek,mt3611-xsphy"
+
+ - #address-cells, #size-cells : should use the same values as the root node
+ - ranges: must be present
+
+Optional properties (controller (parent) node):
+ - reg		: offset and length of register shared by multiple U3 ports,
+		  exclude port's private register, if only U2 ports provided,
+		  shouldn't use the property.
+ - mediatek,src-ref-clk-mhz	: u32, frequency of reference clock for slew rate
+		  calibrate
+ - mediatek,src-coef	: u32, coefficient for slew rate calibrate, depends on
+		  SoC process
+
+Required nodes	: a sub-node is required for each port the controller
+		  provides. Address range information including the usual
+		  'reg' property is used inside these nodes to describe
+		  the controller's topology.
+
+Required properties (port (child) node):
+- reg		: address and length of the register set for the port.
+- clocks	: a list of phandle + clock-specifier pairs, one for each
+		  entry in clock-names
+- clock-names	: must contain
+		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
+			reference clock for SuperSpeedPlus analog phy, sometimes is
+			24M, 25M or 27M, depended on platform.
+- #phy-cells	: should be 1
+		  cell after port phandle is phy type from:
+			- PHY_TYPE_USB2
+			- PHY_TYPE_USB3
+
+The following optional properties are only for debug or HQA test
+Optional properties (PHY_TYPE_USB2 port (child) node):
+- mediatek,eye-src	: u32, the value of slew rate calibrate
+- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
+- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
+- mediatek,efuse-intr	: u32, the selection of Internal Resistor
+
+Optional properties (PHY_TYPE_USB3 port (child) node):
+- mediatek,efuse-intr	: u32, the selection of Internal Resistor
+- mediatek,efuse-tx-imp	: u32, the selection of TX Impedance
+- mediatek,efuse-rx-imp	: u32, the selection of RX Impedance
+
+Banks layout of xsphy
+-------------------------------------------------------------
+port        offset    bank
+u2 port0    0x0000    MISC
+            0x0100    FMREG
+            0x0300    U2PHY_COM
+u2 port1    0x1000    MISC
+            0x1100    FMREG
+            0x1300    U2PHY_COM
+u2 port2    0x2000    MISC
+            ...
+u31 common  0x3000    DIG_GLB
+            0x3100    PHYA_GLB
+u31 port0   0x3400    DIG_LN_TOP
+            0x3500    DIG_LN_TX0
+            0x3600    DIG_LN_RX0
+            0x3700    DIG_LN_DAIF
+            0x3800    PHYA_LN
+u31 port1   0x3a00    DIG_LN_TOP
+            0x3b00    DIG_LN_TX0
+            0x3c00    DIG_LN_RX0
+            0x3d00    DIG_LN_DAIF
+            0x3e00    PHYA_LN
+            ...
+
+DIG_GLB & PHYA_GLB are shared by U31 ports.
+
+Example:
+
+u3phy: usb-phy@11c40000 {
+	compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
+	reg = <0 0x11c43000 0 0x0200>;
+	mediatek,src-ref-clk-mhz = <26>;
+	mediatek,src-coef = <17>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	u2port0: usb-phy@11c40000 {
+		reg = <0 0x11c40000 0 0x0400>;
+		clocks = <&clk48m>;
+		clock-names = "ref";
+		mediatek,eye-src = <4>;
+		#phy-cells = <1>;
+	};
+
+	u3port0: usb-phy@11c43000 {
+		reg = <0 0x11c43400 0 0x0500>;
+		clocks = <&clk26m>;
+		clock-names = "ref";
+		mediatek,efuse-intr = <28>;
+		#phy-cells = <1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index dcf1b8f691d5..266a1bb8bb6e 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,7 +9,8 @@ Required properties:
 	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
-	       "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
+	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
+	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
 
  - reg: offset and length of register set for PHY's common serdes block.
 
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index 42c97426836e..03025d97998b 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
 Required properties:
  - compatible: compatible list, contains
 	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
-	       "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
+	       "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
 
  - reg: offset and length of the PHY register set.
  - #phy-cells: must be 0.
@@ -27,6 +27,27 @@ Optional properties:
 		tuning parameter value for qusb2 phy.
 
  - qcom,tcsr-syscon: Phandle to TCSR syscon register region.
+ - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be
+		added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
+		tuning parameter that may vary for different boards of same SOC.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+ - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX
+		output current.
+		Possible range is - 15mA to 24mA (stepsize of 600 uA).
+		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+		Default value is 22.2mA for sdm845.
+ - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level.
+		Possible range is 0 to 15% (stepsize of 5%).
+		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+		Default value is 10% for sdm845.
+- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX
+		pre-emphasis (specified using qcom,preemphasis-level) must be in
+		effect. Duration could be half-bit of full-bit.
+		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+		This property is applicable to only QUSB2 v2 PHY (sdm845).
+		Default value is full-bit width for sdm845.
 
 Example:
 	hsusb_phy: phy@7411000 {
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 0e03344e2e8b..2e9318151df7 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -76,6 +76,10 @@ Optional properties:
   needs to make sure it does not send more than 90%
   maximum_periodic_data_per_frame. The use case is multiple transactions, but
   less frame rate.
+- mux-controls: The mux control for toggling host/device output of this
+  controller. It's expected that a mux state of 0 indicates device mode and a
+  mux state of 1 indicates host mode.
+- mux-control-names: Shall be "usb_switch" if mux-controls is specified.
 
 i.mx specific properties
 - fsl,usbmisc: phandler of non-core register device, with one
@@ -102,4 +106,6 @@ Example:
 		rx-burst-size-dword = <0x10>;
 		extcon = <0>, <&usb_id>;
 		phy-clkgate-delay-us = <400>;
+		mux-controls = <&usb_switch>;
+		mux-control-names = "usb_switch";
 	};
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 0dbd3083e7dd..7f13ebef06cb 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -7,6 +7,26 @@ Required properties:
  - compatible: must be "snps,dwc3"
  - reg : Address and length of the register set for the device
  - interrupts: Interrupts used by the dwc3 controller.
+ - clock-names: should contain "ref", "bus_early", "suspend"
+ - clocks: list of phandle and clock specifier pairs corresponding to
+           entries in the clock-names property.
+
+Exception for clocks:
+  clocks are optional if the parent node (i.e. glue-layer) is compatible to
+  one of the following:
+    "amlogic,meson-axg-dwc3"
+    "amlogic,meson-gxl-dwc3"
+    "cavium,octeon-7130-usb-uctl"
+    "qcom,dwc3"
+    "samsung,exynos5250-dwusb3"
+    "samsung,exynos7-dwusb3"
+    "sprd,sc9860-dwc3"
+    "st,stih407-dwc3"
+    "ti,am437x-dwc3"
+    "ti,dwc3"
+    "ti,keystone-dwc3"
+    "rockchip,rk3399-dwc3"
+    "xlnx,zynqmp-dwc3"
 
 Optional properties:
  - usb-phy : array of phandle for the PHY device.  The first element
@@ -15,6 +35,7 @@ Optional properties:
  - phys: from the *Generic PHY* bindings
  - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
 	or "usb3-phy".
+ - resets: a single pair of phandle and reset specifier
  - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
  - snps,disable_scramble_quirk: true when SW should disable data scrambling.
 	Only really useful for FPGA builds.
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
index 472facfa5a71..6087dc7f209e 100644
--- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
+++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
@@ -6,12 +6,6 @@ Required properties :
 - interrupts             : Interrupt specifier
 
 Optional properties :
-- fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as sink
-- fcs,max-sink-microamp  : Maximum current to negotiate when configured as sink
-- fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink
-			   If this is less then max-sink-microvolt *
-			   max-sink-microamp then the configured current will
-			   be clamped.
 - fcs,operating-sink-microwatt :
 			   Minimum amount of power accepted from a sink
 			   when negotiating
diff --git a/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
new file mode 100644
index 000000000000..f4633496b122
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
@@ -0,0 +1,45 @@
+HiSilicon STB xHCI
+
+The device node for HiSilicon STB xHCI host controller
+
+Required properties:
+ - compatible: should be "hisilicon,hi3798cv200-xhci"
+ - reg: specifies physical base address and size of the registers
+ - interrupts : interrupt used by the controller
+ - clocks: a list of phandle + clock-specifier pairs, one for each
+	entry in clock-names
+ - clock-names: must contain
+	"bus": for bus clock
+	"utmi": for utmi clock
+	"pipe": for pipe clock
+	"suspend": for suspend clock
+ - resets: a list of phandle and reset specifier pairs as listed in
+	reset-names property.
+ - reset-names: must contain
+	"soft": for soft reset
+ - phys: a list of phandle + phy specifier pairs
+ - phy-names: must contain at least one of following:
+	"inno": for inno phy
+	"combo": for combo phy
+
+Optional properties:
+  - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
+  - usb3-lpm-capable: determines if platform is USB3 LPM capable
+  - imod-interval-ns: default interrupt moderation interval is 40000ns
+
+Example:
+
+xhci0: xchi@f98a0000 {
+	compatible = "hisilicon,hi3798cv200-xhci";
+	reg = <0xf98a0000 0x10000>;
+	interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&crg HISTB_USB3_BUS_CLK>,
+		 <&crg HISTB_USB3_UTMI_CLK>,
+		 <&crg HISTB_USB3_PIPE_CLK>,
+		 <&crg HISTB_USB3_SUSPEND_CLK>;
+	clock-names = "bus", "utmi", "pipe", "suspend";
+	resets = <&crg 0xb0 12>;
+	reset-names = "soft";
+	phys = <&usb2_phy1_port1 0>, <&combphy0 PHY_TYPE_USB3>;
+	phy-names = "inno", "combo";
+};
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index bc8a2fa5d2bf..95afdcf3c337 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -1,54 +1,95 @@
 Qualcomm SuperSpeed DWC3 USB SoC controller
 
 Required properties:
-- compatible:	should contain "qcom,dwc3"
+- compatible:		Compatible list, contains
+			"qcom,dwc3"
+			"qcom,msm8996-dwc3" for msm8996 SOC.
+			"qcom,sdm845-dwc3" for sdm845 SOC.
+- reg:			Offset and length of register set for QSCRATCH wrapper
+- power-domains:	specifies a phandle to PM domain provider node
 - clocks:		A list of phandle + clock-specifier pairs for the
 				clocks listed in clock-names
-- clock-names:	Should contain the following:
+- clock-names:		Should contain the following:
   "core"		Master/Core clock, have to be >= 125 MHz for SS
 				operation and >= 60MHz for HS operation
+  "mock_utmi"		Mock utmi clock needed for ITP/SOF generation in
+				host mode. Its frequency should be 19.2MHz.
+  "sleep"		Sleep clock, used for wakeup when USB3 core goes
+				into low power mode (U3).
 
 Optional clocks:
-  "iface"		System bus AXI clock.  Not present on all platforms
-  "sleep"		Sl