Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Lots of changes (slightly more code increase than usual) at this time,
  while most of code changes are ASoC driver-specific.

  Here are some highlights:

  Core:

   - The new auxiliary bus implementation for Intel DSP, which will be
     used by other drivers as well

   - Lots of ASoC core cleanups and refactoring

   - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others

   - Compress-offload API enhancement for the pause during draining

  HD- and USB-audio:

   - Enhancements of the USB-audio implicit feedback support, including
     better full-duplex operations

   - Continued CA0132 improvements and fixes

   - A few new quirk entries, HDMI audio fixes

  ASoC:

   - Support for boot time selection of Intel DSP firmware, which should
     help distros/users testing new stuff more easily; the kconfig was
     moved to boot time option, too

   - Some basic DPCM support in audio graph card

   - Removal of old pre-DT Freescale drivers

   - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
     Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
     RT715, Qualcomm SM8250 and simple GPIO based muxes"

* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
  ALSA: pcm: oss: Fix potential out-of-bounds shift
  ALSA: usb-audio: Fix potential out-of-bounds shift
  ALSA: hda/ca0132 - Add ZxR surround DAC setup.
  ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
  ALSA: hda/hdmi: packet buffer index must be set before reading value
  ASoC: SOF: imx: update kernel-doc description
  ASoC: mediatek: mt8183: delete some unreachable code
  ASoC: mediatek: mt8183: add PM ops to machine drivers
  ASoC: topology: Fix wrong size check
  ASoC: topology: Add missing size check
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
  ALSA: usb-audio: Fix control 'access overflow' errors from chmap
  ALSA: hda/hdmi: always print pin NIDs as hexadecimal
  ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
  ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
  ...

31 files changed, 1882 insertions, 1152 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index d61bc011e820..6f2398cdc82d 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -199,8 +199,6 @@ patternProperties:
               description:
                 From common IIO binding. Used to pipe external sigma delta
                 modulator or internal ADC output to DFSDM channel.
-                This is not required for "st,stm32-dfsdm-pdm" compatibility as
-                PDM microphone is binded in Audio DT node.
 
           required:
             - io-channels
@@ -235,6 +233,10 @@ patternProperties:
               description: child node
 
               properties:
+                compatible:
+                  enum:
+                    - st,stm32h7-dfsdm-dai
+
                 "#sound-dai-cells":
                   const: 0
 
@@ -244,6 +246,7 @@ patternProperties:
                     modulator or internal ADC output to DFSDM channel.
 
               required:
+                - compatible
                 - "#sound-dai-cells"
                 - io-channels
 
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
new file mode 100644
index 000000000000..701449311fec
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+
+title: Analog Devices ADAU1372 CODEC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.om>
+
+description: |
+  Analog Devices ADAU1372 four inputs and two outputs codec.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1372
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: "mclk"
+
+  powerdown-gpios:
+    description: GPIO used for hardware power-down.
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@3c {
+                compatible = "adi,adau1372";
+                reg = <0x3c>;
+                #sound-dai-cells = <0>;
+                clock-names = "mclk";
+                clocks = <&adau1372z_xtal>;
+        };
+    };
+
+    adau1372z_xtal: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <12288000>;
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
deleted file mode 100644
index 37f8aad01203..000000000000
--- a/Documentation/devicetree/bindings/sound/adi,adau1977.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Analog Devices ADAU1977/ADAU1978/ADAU1979
-
-Datasheets:
-https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
-https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
-https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
-
-This driver supports both the I2C and SPI bus.
-
-Required properties:
- - compatible: Should contain one of the following:
-               "adi,adau1977"
-               "adi,adau1978"
-               "adi,adau1979"
-
- - AVDD-supply: analog power supply for the device, please consult
-                Documentation/devicetree/bindings/regulator/regulator.txt
-
-Optional properties:
- - reset-gpios: the reset pin for the chip, for more details consult
-                Documentation/devicetree/bindings/gpio/gpio.txt
-
- - DVDD-supply: supply voltage for the digital core, please consult
-                Documentation/devicetree/bindings/regulator/regulator.txt
-
-- adi,micbias: configures the voltage setting for the MICBIAS pin.
-		Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage
-		5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V
-		If not specified the default value will be "7" meaning 8.5 Volts.
-		This property is only valid for the ADAU1977
-
-For required properties on SPI, please consult
-Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties on I2C:
-
- - reg:         The i2c address. Value depends on the state of ADDR0
-                and ADDR1, as wired in hardware.
-
-Examples:
-
-	adau1977_spi: adau1977@0 {
-		compatible = "adi,adau1977";
-		spi-max-frequency = <600000>;
-
-		AVDD-supply = <&regulator>;
-		DVDD-supply = <&regulator_digital>;
-
-		adi,micbias = <3>;
-		reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-	};
-
-	adau1977_i2c: adau1977@11 {
-		compatible = "adi,adau1977";
-		reg = <0x11>;
-
-		AVDD-supply = <&regulator>;
-		DVDD-supply = <&regulator_digital>;
-
-		reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
new file mode 100644
index 000000000000..b80454ad97da
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1977.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU1977/ADAU1978/ADAU1979 Quad ADC with Diagnostics
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Bogdan Togorean <bogdan.togorean@analog.com>
+
+description: |
+  Analog Devices ADAU1977 and similar quad ADC with Diagnostics
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1977
+      - adi,adau1978
+      - adi,adau1979
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  AVDD-supply:
+    description: Analog power support for the device.
+
+  DVDD-supply:
+    description: Supply voltage for digital core.
+
+  adi,micbias:
+    description: |
+      Configures the voltage setting for the MICBIAS pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
+    default: 7
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau1977_spi: adau1977@0 {
+            compatible = "adi,adau1977";
+            reg = <0>;
+            spi-max-frequency = <600000>;
+
+            AVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator_digital>;
+
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+
+            adi,micbias = <3>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau1977_i2c: adau1977@11 {
+            compatible = "adi,adau1977";
+            reg = <0x11>;
+
+            AVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator_digital>;
+
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index 112ae00d63c1..a16e37b01e1d 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -24,6 +24,7 @@ properties:
       - items:
           - const: allwinner,sun50i-a64-i2s
           - const: allwinner,sun8i-h3-i2s
+      - const: allwinner,sun50i-h6-i2s
 
   reg:
     maxItems: 1
@@ -59,6 +60,7 @@ allOf:
               - allwinner,sun8i-a83t-i2s
               - allwinner,sun8i-h3-i2s
               - allwinner,sun50i-a64-codec-i2s
+              - allwinner,sun50i-h6-i2s
 
     then:
       required:
@@ -68,7 +70,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-a83t-i2s
+            enum:
+              - allwinner,sun8i-a83t-i2s
+              - allwinner,sun8i-h3-i2s
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index d5f6919a2d69..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible				: "audio-graph-card";
-- dais					: list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		dais = <&cpu_port>;
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI case
------------------------
-
-	sound-card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		dais = <&cpu_port0
-			&cpu_port1
-			&cpu_port2>;
-	};
-
-	audio-codec@0 {
-		...
-		port {
-			codec0_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-		};
-	};
-
-	audio-codec@1 {
-		...
-		port {
-			codec1_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	audio-codec@2 {
-		...
-		port {
-			codec2_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint2>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		ports {
-			cpu_port0: port@0 {
-				cpu_endpoint0: endpoint {
-					remote-endpoint = <&codec0_endpoint>;
-
-					dai-format = "left_j";
-					...
-				};
-			};
-			cpu_port1: port@1 {
-				cpu_endpoint1: endpoint {
-					remote-endpoint = <&codec1_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-			cpu_port2: port@2 {
-				cpu_endpoint2: endpoint {
-					remote-endpoint = <&codec2_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-		};
-	};
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		prefix = "codec";
-		routing = "codec Playback", "DAI0 Playback",
-			  "DAI0 Capture",   "codec Capture";
-		convert-rate = <48000>;
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		routing = "codec Playback", "DAI0 Playback",
-			  "codec Playback", "DAI1 Playback",
-			  "DAI0 Capture",   "codec Capture";
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-
-		audio-graph-card,prefix = "codec";
-		audio-graph-card,convert-rate = <48000>;
-		port {
-			reg = <0>;
-			codec_endpoint0: endpoint@0 {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-			codec_endpoint1: endpoint@1 {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint0: endpoint@0 {
-				remote-endpoint = <&codec_endpoint0>;
-
-				dai-format = "left_j";
-				...
-			};
-			cpu_endpoint1: endpoint@1 {
-				remote-endpoint = <&codec_endpoint1>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
-	CPU0 ------ ak4613
-	CPU1 ------ HDMI
-	CPU2 ------ PCM3168A-p	/* DPCM 1ch/2ch */
-	CPU3 --/		/* DPCM 3ch/4ch */
-	CPU4 --/		/* DPCM 5ch/6ch */
-	CPU5 --/		/* DPCM 7ch/8ch */
-	CPU6 ------ PCM3168A-c
-
-	sound_card: sound {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		routing =	"pcm3168a Playback", "DAI2 Playback",
-				"pcm3168a Playback", "DAI3 Playback",
-				"pcm3168a Playback", "DAI4 Playback",
-				"pcm3168a Playback", "DAI5 Playback";
-
-		dais = <&snd_port0	/* ak4613 */
-			&snd_port1	/* HDMI0  */
-			&snd_port2	/* pcm3168a playback */
-			&snd_port3	/* pcm3168a capture  */
-			>;
-	};
-
-	ak4613: codec@10 {
-		...
-		port {
-			ak4613_endpoint: endpoint {
-				remote-endpoint = <&rsnd_endpoint0>;
-			};
-		};
-	};
-
-	pcm3168a: audio-codec@44 {
-		...
-		audio-graph-card,prefix = "pcm3168a";
-		audio-graph-card,convert-channels = <8>; /* TDM Split */
-		ports {
-			port@0 {
-				reg = <0>;
-				pcm3168a_endpoint_p1: endpoint@1 {
-					remote-endpoint = <&rsnd_endpoint2>;
-					...
-				};
-				pcm3168a_endpoint_p2: endpoint@2 {
-					remote-endpoint = <&rsnd_endpoint3>;
-					...
-				};
-				pcm3168a_endpoint_p3: endpoint@3 {
-					remote-endpoint = <&rsnd_endpoint4>;
-					...
-				};
-				pcm3168a_endpoint_p4: endpoint@4 {
-					remote-endpoint = <&rsnd_endpoint5>;
-					...
-				};
-			};
-			port@1 {
-				reg = <1>;
-				pcm3168a_endpoint_c: endpoint {
-					remote-endpoint = <&rsnd_endpoint6>;
-					...
-				};
-			};
-		};
-	};
-
-	&sound {
-		ports {
-			snd_port0: port@0 {
-				rsnd_endpoint0: endpoint {
-					remote-endpoint = <&ak4613_endpoint>;
-					...
-				};
-			};
-			snd_port1: port@1 {
-				rsnd_endpoint1: endpoint {
-					remote-endpoint = <&dw_hdmi0_snd_in>;
-					...
-				};
-			};
-			snd_port2: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rsnd_endpoint2: endpoint@2 {
-					remote-endpoint = <&pcm3168a_endpoint_p1>;
-					...
-				};
-				rsnd_endpoint3: endpoint@3 {
-					remote-endpoint = <&pcm3168a_endpoint_p2>;
-					...
-				};
-				rsnd_endpoint4: endpoint@4 {
-					remote-endpoint = <&pcm3168a_endpoint_p3>;
-					...
-				};
-				rsnd_endpoint5: endpoint@5 {
-					remote-endpoint = <&pcm3168a_endpoint_p4>;
-					...
-				};
-			};
-			snd_port3: port@6 {
-				rsnd_endpoint6: endpoint {
-					remote-endpoint = <&pcm3168a_endpoint_c>;
-					...
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..109e55f9e597
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+allOf:
+  - $ref: /schemas/sound/audio-graph.yaml#
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card
+      - audio-graph-scu-card
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card";
+
+        dais = <&cpu_port_a>;
+    };
+
+    cpu {
+        /*
+         * dai-controller own settings
+         */
+
+        port {
+            cpu_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+                dai-format = "left_j";
+            };
+        };
+    };
+
+    codec {
+        /*
+         * codec own settings
+         */
+
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&cpu_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
new file mode 100644
index 000000000000..2005014161be
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card 'port' Node Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+select: false
+
+properties:
+  port:
+    description: single OF-Graph subnode
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+      prefix:
+        description: "device name prefix"
+        $ref: /schemas/types.yaml#/definitions/string
+      convert-rate:
+        description: CPU to Codec rate convert.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      convert-channels:
+        description: CPU to Codec rate channels.
+        $ref: /schemas/types.yaml#/definitions/uint32
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        type: object
+        properties:
+          remote-endpoint:
+            maxItems: 1
+          mclk-fs:
+            description: |
+              Multiplication factor between stream rate and codec mclk.
+              When defined, mclk-fs property defined in dai-link sub nodes are
+              ignored.
+            $ref: /schemas/types.yaml#/definitions/uint32
+          frame-inversion:
+            description: dai-link uses frame clock inversion
+            $ref: /schemas/types.yaml#/definitions/flag
+          bitclock-inversion:
+            description: dai-link uses bit clock inversion
+            $ref: /schemas/types.yaml#/definitions/flag
+          frame-master:
+            description: Indicates dai-link frame master.
+            $ref: /schemas/types.yaml#/definitions/phandle
+          bitclock-master:
+            description: Indicates dai-link bit clock master
+            $ref: /schemas/types.yaml#/definitions/phandle
+          dai-format:
+            description: audio format.
+            items:
+              enum:
+                - i2s
+                - right_j
+                - left_j
+                - dsp_a
+                - dsp_b
+                - ac97
+                - pdm
+                - msb
+                - lsb
+          convert-rate:
+            description: CPU to Codec rate convert.
+            $ref: /schemas/types.yaml#/definitions/uint32
+          convert-channels:
+            description: CPU to Codec rate channels.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - remote-endpoint
+
+  ports:
+    description: multi OF-Graph subnode
+    type: object
+    patternProperties:
+      "^port(@[0-9a-f]+)?":
+        $ref: "#/properties/port"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
new file mode 100644
index 000000000000..4b46794e5153
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  dais:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  pa-gpios:
+    maxItems: 1
+  hp-det-gpio:
+    maxItems: 1
+  mic-det-gpio:
+    maxItems: 1
+
+required:
+  - dais
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/d