Merge branch 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "I2C has the following changes for you:

   - new flag to mark DMA safe buffers in i2c_msg. Also, some
     infrastructure around it. And docs.

   - huge refactoring of the at24 driver led by the new maintainer
     Bartosz

   - update I2C bus recovery to send STOP after recovery

   - conversion from gpio to gpiod for I2C bus recovery

   - adding a fault-injector to the i2c-gpio driver

   - lots of small driver improvements, and bigger ones to
     i2c-sh_mobile"

* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
  i2c: mv64xxx: Add myself as maintainer for this driver
  i2c: mv64xxx: Fix clock resource by adding an optional bus clock
  i2c: mv64xxx: Remove useless test before clk_disable_unprepare
  i2c: mxs: use true and false for boolean values
  i2c: meson: update doc description to fix build warnings
  i2c: meson: add configurable divider factors
  dt-bindings: i2c: update documentation for the Meson-AXG
  i2c: imx-lpi2c: add runtime pm support
  i2c: rcar: fix some trivial typos in comments
  i2c: davinci: fix the cpufreq transition
  i2c: rk3x: add proper kerneldoc header
  i2c: rk3x: account for const type of of_device_id.data
  i2c: acorn: remove outdated path from file header
  i2c: acorn: add MODULE_LICENSE tag
  i2c: rcar: implement bus recovery
  i2c: send STOP after successful bus recovery
  i2c: ensure SDA is released in recovery if SDA is controllable
  i2c: add 'set_sda' to bus_recovery_info
  i2c: add identifier in declarations for i2c_bus_recovery
  i2c: make kerneldoc about bus recovery more precise
  ...

6 files changed, 115 insertions, 50 deletions

diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
new file mode 100644
index 000000000000..1812c848e369
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -0,0 +1,78 @@
+EEPROMs (I2C)
+
+Required properties:
+
+  - compatible: Must be a "<manufacturer>,<model>" pair. The following <model>
+                values are supported (assuming "atmel" as manufacturer):
+
+                "atmel,24c00",
+                "atmel,24c01",
+                "atmel,24cs01",
+                "atmel,24c02",
+                "atmel,24cs02",
+                "atmel,24mac402",
+                "atmel,24mac602",
+                "atmel,spd",
+                "atmel,24c04",
+                "atmel,24cs04",
+                "atmel,24c08",
+                "atmel,24cs08",
+                "atmel,24c16",
+                "atmel,24cs16",
+                "atmel,24c32",
+                "atmel,24cs32",
+                "atmel,24c64",
+                "atmel,24cs64",
+                "atmel,24c128",
+                "atmel,24c256",
+                "atmel,24c512",
+                "atmel,24c1024",
+
+                If <manufacturer> is not "atmel", then a fallback must be used
+                with the same <model> and "atmel" as manufacturer.
+
+                Example:
+                        compatible = "microchip,24c128", "atmel,24c128";
+
+                Supported manufacturers are:
+
+                "catalyst",
+                "microchip",
+                "ramtron",
+                "renesas",
+                "nxp",
+                "st",
+
+                Some vendors use different model names for chips which are just
+                variants of the above. Known such exceptions are listed below:
+
+                "renesas,r1ex24002" - the fallback is "atmel,24c02"
+
+  - reg: The I2C address of the EEPROM.
+
+Optional properties:
+
+  - pagesize: The length of the pagesize for writing. Please consult the
+              manual of your device, that value varies a lot. A wrong value
+              may result in data loss! If not specified, a safety value of
+              '1' is used which will be very slow.
+
+  - read-only: This parameterless property disables writes to the eeprom.
+
+  - size: Total eeprom size in bytes.
+
+  - no-read-rollover: This parameterless property indicates that the
+                      multi-address eeprom does not automatically roll over
+                      reads to the next slave address. Please consult the
+                      manual of your device.
+
+  - wp-gpios: GPIO to which the write-protect pin of the chip is connected.
+
+Example:
+
+eeprom@52 {
+	compatible = "atmel,24c32";
+	reg = <0x52>;
+	pagesize = <32>;
+	wp-gpios = <&gpio1 3 0>;
+};
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt
deleted file mode 100644
index 27f2bc15298a..000000000000
--- a/Documentation/devicetree/bindings/eeprom/eeprom.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-EEPROMs (I2C)
-
-Required properties:
-
-  - compatible : should be "<manufacturer>,<type>", like these:
-
-	"atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
-	"atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
-	"atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
-
-	"catalyst,24c32"
-
-	"microchip,24c128"
-
-	"ramtron,24c64"
-
-	"renesas,r1ex24002"
-
-	The following manufacturers values have been deprecated:
-	"at", "at24"
-
-	 If there is no specific driver for <manufacturer>, a generic
-	 device with <type> and manufacturer "atmel" should be used.
-	 Possible types are:
-	 "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
-	 "24c128", "24c256", "24c512", "24c1024", "spd"
-
-  - reg : the I2C address of the EEPROM
-
-Optional properties:
-
-  - pagesize : the length of the pagesize for writing. Please consult the
-               manual of your device, that value varies a lot. A wrong value
-	       may result in data loss! If not specified, a safety value of
-	       '1' is used which will be very slow.
-
-  - read-only: this parameterless property disables writes to the eeprom
-
-  - size: total eeprom size in bytes
-
-Example:
-
-eeprom@52 {
-	compatible = "atmel,24c32";
-	reg = <0x52>;
-	pagesize = <32>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-meson.txt b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
index 611b934c7e10..13d410de077c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-meson.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
@@ -1,7 +1,11 @@
 Amlogic Meson I2C controller
 
 Required properties:
- - compatible: must be "amlogic,meson6-i2c" or "amlogic,meson-gxbb-i2c"
+ - compatible: must be:
+	"amlogic,meson6-i2c" for Meson8 and compatible SoCs
+	"amlogic,meson-gxbb-i2c" for GXBB and compatible SoCs
+	"amlogic,meson-axg-i2c"for AXG and compatible SoCs
+
  - reg: physical address and length of the device registers
  - interrupts: a single interrupt specifier
  - clocks: clock for the device
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index ff7bf37deb43..e199695b1c96 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -5,6 +5,7 @@ The MediaTek's I2C controller is used to interface with I2C devices.
 Required properties:
   - compatible: value should be either of the following.
       "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
+      "mediatek,mt2712-i2c": for MediaTek MT2712
       "mediatek,mt6577-i2c": for MediaTek MT6577
       "mediatek,mt6589-i2c": for MediaTek MT6589
       "mediatek,mt7622-i2c": for MediaTek MT7622
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index aa097045a10e..34d91501342e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -1,10 +1,19 @@
 * NXP PCA954x I2C bus switch
 
+The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
+
 Required Properties:
 
   - compatible: Must contain one of the following.
-    "nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544",
-    "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548"
+    "nxp,pca9540",
+    "nxp,pca9542",
+    "nxp,pca9543",
+    "nxp,pca9544",
+    "nxp,pca9545",
+    "nxp,pca9546", "nxp,pca9846",
+    "nxp,pca9547", "nxp,pca9847",
+    "nxp,pca9548", "nxp,pca9848",
+    "nxp,pca9849"
 
   - reg: The I2C address of the device.
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 5c30026921ae..0ffe65a316ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -25,6 +25,15 @@ default frequency is 100kHz
                      whenever you're using the "allwinner,sun6i-a31-i2c"
                      compatible.
 
+ - clocks:	   : pointers to the reference clocks for this device, the
+		     first one is the one used for the clock on the i2c bus,
+		     the second one is the clock used to acces the registers
+		     of the controller
+
+ - clock-names	   : names of used clocks, mandatory if the second clock is
+		     used, the name must be "core", and "reg" (the latter is
+		     only for Armada 7K/8K).
+
 Examples:
 
 	i2c@11000 {
@@ -42,3 +51,14 @@ For the Armada XP:
 		interrupts = <29>;
 		clock-frequency = <100000>;
 	};
+
+For the Armada 7040:
+
+	i2c@701000 {
+		compatible = "marvell,mv78230-i2c";
+		reg = <0x701000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+		clock-names = "core", "reg";
+		clocks = <&core_clock>, <&reg_clock>;
+	};