diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-13 15:42:44 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-13 15:42:44 -0700 |
commit | 3f06962273e73c5f7a651726b191d531cadef788 (patch) | |
tree | 370219bd166ac6dda105901dd316a54c2f9ac3d0 /Documentation/devicetree/bindings | |
parent | 2260840592fbed5be98ca03c97eb8172941f27ac (diff) | |
parent | 46ce10df799fb0647a9c0e3f793e66463a8d6773 (diff) |
Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"This contains the following changes for MTD:
MTD core changes:
- New Hyperbus framework
- New _is_locked (concat) implementation
- Various cleanups
NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()
Raw NAND controller drivers changes:
- brcmnand:
- fix BCH ECC layout for large page NAND parts
- fallback to detected ecc-strength, ecc-step-size
- when oops in progress use pio and interrupt polling
- code refactor code to introduce helper functions
- add support for v7.3 controller
- FSMC:
- use nand_op_trace for operation tracing
- GPMI:
- move all driver code into single file
- various cleanups (including dmaengine changes)
- use runtime PM to manage clocks
- implement exec_op
- MTK:
- correct low level time calculation of r/w cycle
- improve data sampling timing for read cycle
- add validity check for CE# pin setting
- fix wrongly assigned OOB buffer pointer issue
- re-license MTK NAND driver as Dual MIT/GPL
- STM32:
- manage the get_irq error case
- increase DMA completion timeouts
Raw NAND chips drivers changes:
- Macronix: add read-retry support
Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings
SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips
SPI-NOR core changes:
- add support for the mt25ql02g and w25q16jv flashes
- print error in case of jedec read id fails
- is25lp256: add post BFPT fix to correct the addr_width
SPI NOR controller drivers changes:
- intel-spi: Add support for Intel Elkhart Lake SPI serial flash
- smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
- cadence-quadspi: add reset control"
* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
mtd: concat: implement _is_locked mtd operation
mtd: concat: refactor concat_lock/concat_unlock
mtd: abi: do not use C++ style comments in uapi header
mtd: afs: remove unneeded NULL check
mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
mtd: hyperbus: Add driver for TI's HyperBus memory controller
mtd: spinand: read returns badly if the last page has bitflips
mtd: spinand: Add initial support for Paragon PN26G0xA
mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
mtd: rawnand: gpmi: remove double assignment to block_size
dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
mtd: rawnand: brcmnand: Add support for v7.3 controller
mtd: rawnand: brcmnand: Refactored code to introduce helper functions
mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
mtd: Add flag to indicate panic_write
mtd: rawnand: Add Macronix NAND read retry support
mtd: onenand: Avoid fall-through warnings
mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
mtd: spinand: Add support for two-byte device IDs
...
Diffstat (limited to 'Documentation/devicetree/bindings')
5 files changed, 72 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index 0b7c3738b66c..82156dc8f304 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -28,6 +28,7 @@ Required properties: brcm,brcmnand-v7.0 brcm,brcmnand-v7.1 brcm,brcmnand-v7.2 + brcm,brcmnand-v7.3 brcm,brcmnand - reg : the register start and length for NAND register region. (optional) Flash DMA register range (if present) @@ -101,10 +102,10 @@ Required properties: number (e.g., 0, 1, 2, etc.) - #address-cells : see partition.txt - #size-cells : see partition.txt -- nand-ecc-strength : see nand-controller.yaml -- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml Optional properties: +- nand-ecc-strength : see nand-controller.yaml +- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml - nand-on-flash-bbt : boolean, to enable the on-flash BBT for this chip-select. See nand-controller.yaml - brcm,nand-oob-sector-size : integer, to denote the spare area sector size diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index 4345c3a6f530..945be7d5b236 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -35,6 +35,9 @@ custom properties: (qspi_n_ss_out). - cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include either "qspi" and/or "qspi-ocp". Example: @@ -50,6 +53,8 @@ Example: cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; flash0: n25q00@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt new file mode 100644 index 000000000000..ad42f4db32f1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt @@ -0,0 +1,13 @@ +Bindings for HyperFlash NOR flash chips compliant with Cypress HyperBus +specification and supports Cypress CFI specification 1.5 command set. + +Required properties: +- compatible : "cypress,hyperflash", "cfi-flash" for HyperFlash NOR chips +- reg : Address of flash's memory map + +Example: + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x4000000>; + }; diff --git a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt b/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt deleted file mode 100644 index ddd18c135148..000000000000 --- a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt +++ /dev/null @@ -1,43 +0,0 @@ -* STMicroelectronics Quad Serial Peripheral Interface(QuadSPI) - -Required properties: -- compatible: should be "st,stm32f469-qspi" -- reg: the first contains the register location and length. - the second contains the memory mapping address and length -- reg-names: should contain the reg names "qspi" "qspi_mm" -- interrupts: should contain the interrupt for the device -- clocks: the phandle of the clock needed by the QSPI controller -- A pinctrl must be defined to set pins in mode of operation for QSPI transfer - -Optional properties: -- resets: must contain the phandle to the reset controller. - -A spi flash must be a child of the nor_flash node and could have some -properties. Also see jedec,spi-nor.txt. - -Required properties: -- reg: chip-Select number (QSPI controller may connect 2 nor flashes) -- spi-max-frequency: max frequency of spi bus - -Optional property: -- spi-rx-bus-width: see ../spi/spi-bus.txt for the description - -Example: - -qspi: spi@a0001000 { - compatible = "st,stm32f469-qspi"; - reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; - reg-names = "qspi", "qspi_mm"; - interrupts = <91>; - resets = <&rcc STM32F4_AHB3_RESET(QSPI)>; - clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi0>; - - flash@0 { - reg = <0>; - spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt new file mode 100644 index 000000000000..faa81c2e5da6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt @@ -0,0 +1,51 @@ +Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs + +Required properties: +- compatible : "ti,am654-hbmc" for AM654 SoC +- reg : Two entries: + First entry pointed to the register space of HBMC controller + Second entry pointing to the memory map region dedicated for + MMIO access to attached flash devices +- ranges : Address translation from offset within CS to allocated MMIO + space in SoC + +Optional properties: +- mux-controls : phandle to the multiplexer that controls selection of + HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI, + if property is absent. + See Documentation/devicetree/bindings/mux/reg-mux.txt + for mmio-mux binding details + +Example: + + system-controller@47000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x47000000 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hbmc_mux: multiplexer { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */ + }; + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x0 0x47034000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + power-domains = <&k3_pds 55>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ + <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ + mux-controls = <&hbmc_mux 0>; + + /* Slave flash node */ + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + }; + }; |