diff options
author | Mark Brown <broonie@kernel.org> | 2020-03-27 15:53:00 +0000 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2020-03-27 15:53:00 +0000 |
commit | 1ba0b52ea73bd46ff053edea21f5630f5277fefe (patch) | |
tree | 1a4e561a0e0238a54aff02aa47e20cfcd61522be /Documentation/devicetree/bindings | |
parent | 16fbf79b0f83bc752cee8589279f1ebfe57b3b6e (diff) | |
parent | ebb3b9a92ba98efa8d0525367e653d5ee6630c1b (diff) |
Merge branch 'spi-5.7' into spi-next
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r-- | Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/regulator/mps,mp5416.yaml | 78 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 22 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 5 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml | 41 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-controller.yaml | 10 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 19 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-mtk-nor.txt (renamed from Documentation/devicetree/bindings/mtd/mtk-quadspi.txt) | 15 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-mux.yaml | 89 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt | 3 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-rockchip.txt | 58 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 107 |
13 files changed, 410 insertions, 77 deletions
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml new file mode 100644 index 000000000000..893d81e54caa --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SPI controllers + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this + node will always be a child of an FSI CFAM node; see fsi.txt for details on + FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of + SPI controllers. + +properties: + compatible: + enum: + - ibm,fsi2spi + + reg: + items: + - description: FSI slave address + +required: + - compatible + - reg + +examples: + - | + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 3c91ad430eea..b823b8625243 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8901-regulators" "qcom,rpm-pm8921-regulators" "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" - vdd_l0_l1_lvs-supply: - vdd_l2_l11_l12-supply: @@ -171,6 +172,9 @@ pm8018: s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l14, lvs1 +smb208: + s1a, s1b, s2a, s2b + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml new file mode 100644 index 000000000000..f0acce2029fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MP5416 PMIC + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +properties: + $nodename: + pattern: "^pmic@[0-9a-f]{1,2}$" + compatible: + enum: + - mps,mp5416 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4] and LDO[1-4] + + patternProperties: + "^buck[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + "^ldo[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3975000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 49b617c98ae7..9147df29022a 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -22,6 +22,7 @@ properties: enum: - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs + - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs interrupts: maxItems: 1 @@ -40,6 +41,27 @@ properties: items: - const: core +if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + +then: + properties: + clocks: + contains: + items: + - description: controller register bus clock + - description: baud rate generator and delay control clock + + clock-names: + minItems: 2 + items: + - const: core + - const: pclk + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 2d3264140cc5..33bc58f4cf4b 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -10,7 +10,10 @@ Required properties: - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M + - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ + - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM + - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN + - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - clocks : Clock specifiers for both ipg and per clocks. diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml new file mode 100644 index 000000000000..2aa766759d59 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller + +maintainers: + - Chuanhong Guo <gch981213@gmail.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: qca,ar934x-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/ath79-clk.h> + spi: spi@1f000000 { + compatible = "qca,ar934x-spi"; + reg = <0x1f000000 0x1c>; + clocks = <&pll ATH79_CLK_AHB>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 1e0ca6ccf64b..d8e5509a7081 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -52,6 +52,12 @@ properties: description: The SPI controller acts as a slave, instead of a master. +oneOf: + - required: + - "#address-cells" + - required: + - spi-slave + patternProperties: "^slave$": type: object @@ -114,7 +120,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MISO. + Bus width to the SPI bus used for read transfers. spi-rx-delay-us: description: @@ -126,7 +132,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MOSI. + Bus width to the SPI bus used for write transfers. spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 162e024b95a0..30a79da9c039 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,12 +1,17 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", - "fsl,ls2085a-dspi" - or - "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi" +- compatible : must be one of: + "fsl,vf610-dspi", + "fsl,ls1021a-v1.0-dspi", + "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1028a-dspi", + "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), + "fsl,ls2085a-dspi", + "fsl,lx2160a-dspi", - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. @@ -14,11 +19,11 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. -- bus-num : the slave chip chipselect signal number. Optional property: - big-endian: If present the dspi device's registers are implemented in big endian mode. +- bus-num : the slave chip chipselect signal number. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt index a12e3b5c495d..984ae7fd4f94 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MediaTek SoCs +* Serial NOR flash controller for MediaTek ARM SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -13,6 +13,7 @@ Required properties: "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register +- interrupts: Interrupt number used by the controller. - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks the clocks should be named "spi" and "sf". "spi" is used for spi bus, @@ -22,20 +23,16 @@ Required properties: - #address-cells: should be <1> - #size-cells: should be <0> -The SPI flash must be a child of the nor_flash node and must have a -compatible property. Also see jedec,spi-nor.txt. - -Required properties: -- compatible: May include a device-specific string consisting of the manufacturer - and name of the chip. Must also include "jedec,spi-nor" for any - SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number +There should be only one spi slave device following generic spi bindings. +It's not recommended to use this controller for devices other than SPI NOR +flash due to limited transfer capability of this controller. Example: nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; clock-names = "spi", "sf"; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml new file mode 100644 index 000000000000..0ae692dc28b5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SPI Multiplexer + +description: | + This binding describes a SPI bus multiplexer to route the SPI chip select + signals. This can be used when you need more devices than the SPI controller + has chip selects available. An example setup is shown in ASCII art; the actual + setting of the multiplexer to a channel needs to be done by a specific SPI mux + driver. + + MOSI /--------------------------------+--------+--------+--------\ + MISO |/------------------------------+|-------+|-------+|-------\| + SCL ||/----------------------------+||------+||------+||------\|| + ||| ||| ||| ||| ||| + +------------+ ||| ||| ||| ||| + | SoC ||| | +-+++-+ +-+++-+ +-+++-+ +-+++-+ + | ||| | | dev | | dev | | dev | | dev | + | +--+++-+ | CS-X +------+\ +--+--+ +--+--+ +--+--+ +--+--+ + | | SPI +-|-------+ Mux |\\ CS-0 | | | | + | +------+ | +--+---+\\\-------/ CS-1 | | | + | | | \\\----------------/ CS-2 | | + | +------+ | | \\-------------------------/ CS-3 | + | | ? +-|----------/ \----------------------------------/ + | +------+ | + +------------+ + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: spi-mux + + mux-controls: + maxItems: 1 + +required: + - compatible + - reg + - spi-max-frequency + - mux-controls + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + spi@0 { + compatible = "spi-mux"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <100000000>; + + mux-controls = <&mux>; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + }; + + spi-device@1 { + compatible = "lineartechnology,ltc2488"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <10000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt index 2cd67eb727d4..7ac60d9fe357 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt @@ -2,6 +2,9 @@ Required properties: - compatible : Should be "nxp,lx2160a-fspi" + "nxp,imx8qxp-fspi" + "nxp,imx8mm-fspi" + - reg : First contains the register location and length, Second contains the memory mapping address and length - reg-names : Should contain the resource reg names: diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted file mode 100644 index a0edac12d8df..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file mode 100644 index 000000000000..81ad4b761502 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPI Controller + +description: + The Rockchip SPI controller is used to interface with various devices such + as flash and display controllers using the SPI communication interface. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rk3036-spi + - const: rockchip,rk3066-spi + - const: rockchip,rk3228-spi + - const: rockchip,rv1108-spi + - items: + - enum: + - rockchip,px30-spi + - rockchip,rk3188-spi + - rockchip,rk3288-spi + - rockchip,rk3308-spi + - rockchip,rk3328-spi + - rockchip,rk3368-spi + - rockchip,rk3399-spi + - const: rockchip,rk3066-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: transfer-clock + - description: peripheral clock + + clock-names: + items: + - const: spiclk + - const: apb_pclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rx-sample-delay-ns: + default: 0 + description: + Nano seconds to delay after the SCLK edge before sampling Rx data + (may need to be fine tuned for high capacitance lines). + If not specified 0 will be used. + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + description: + Names for the pin configuration(s); may be "default" or "sleep", + where the "sleep" configuration may describe the state + the pins should be in during system suspend. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi1_pins>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; + rx-sample-delay-ns = <10>; + #address-cells = <1>; + #size-cells = <0>; + }; |