Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...

1 files changed, 11 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index f1c5ae59e7c9..1f9cd7095337 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -10,13 +10,21 @@ Required properties:
   - reg: Base address and size of SAI common register set.
   - clocks: Must contain phandle and clock specifier pairs for each entry
 	in clock-names.
-  - clock-names: Must contain "x8k" and "x11k"
+  - clock-names: Must contain "pclk" "x8k" and "x11k"
+	"pclk": Clock which feeds the peripheral bus interface.
+	        Mandatory for "st,stm32h7-sai" compatible.
+	        Not used for "st,stm32f4-sai" compatible.
 	"x8k": SAI parent clock for sampling rates multiple of 8kHz.
 	"x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
   - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
 
 Optional properties:
   - resets: Reference to a reset controller asserting the SAI
+  - st,sync: specify synchronization mode.
+	By default SAI sub-block is in asynchronous mode.
+	This property sets SAI sub-block as slave of another SAI sub-block.
+	Must contain the phandle and index of the sai sub-block providing
+	the synchronization.
 
 SAI subnodes:
 Two subnodes corresponding to SAI sub-block instances A et B can be defined.
@@ -52,8 +60,8 @@ sai1: sai1@40015800 {
 	#size-cells = <1>;
 	ranges = <0 0x40015800 0x400>;
 	reg = <0x40015800 0x4>;
-	clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "x8k", "x11k";
+	clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
+	clock-names = "pclk", "x8k", "x11k";
 	interrupts = <87>;
 
 	sai1a: audio-controller@40015804 {