Merge tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: changes for v5.8 merge window

Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.

Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.

Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  usb: dwc3: gadget: Check for prepared TRBs
  usb: gadget: Fix issue with config_ep_by_speed function
  usb: cdns3: ep0: delete the redundant status stage
  usb: dwc2: Update Core Reset programming flow.
  usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
  usb: gadget: fix potential double-free in m66592_probe.
  usb: cdns3: Fix runtime PM imbalance on error
  usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  USB: dummy-hcd: use configurable endpoint naming scheme
  usb: cdns3: gadget: assign interrupt number to USB gadget structure
  usb: gadget: core: sync interrupt before unbind the udc
  arm64: dts: qcom: sc7180: Add interconnect properties for USB
  arm64: dts: qcom: sdm845: Add interconnect properties for USB
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  ARM: dts: at91: Remove the USB EP child node
  dt-bindings: usb: atmel: Mark EP child node as deprecated
  ...

1 files changed, 0 insertions, 31 deletions

diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
deleted file mode 100644
index 114947e1de3d..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding
-
-Required properties:
-- compatible:	Should be "amlogic,meson-gxl-usb3-phy"
-- #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
-- reg:		The base address and length of the registers
-- interrupts:	the interrupt specifier for the OTG detection
-- clocks:	phandles to the clocks for
-		- the USB3 PHY
-		- and peripheral mode/OTG detection
-- clock-names:	must contain "phy" and "peripheral"
-- resets:	phandle to the reset lines for:
-		- the USB3 PHY and
-		- peripheral mode/OTG detection
-- reset-names:	must contain "phy" and "peripheral"
-
-Optional properties:
-- phy-supply:	see phy-bindings.txt in this directory
-
-
-Example:
-	usb3_phy0: phy@78080 {
-		compatible = "amlogic,meson-gxl-usb3-phy";
-		#phy-cells = <0>;
-		reg = <0x0 0x78080 0x0 0x20>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>;
-		clock-names = "phy", "peripheral";
-		resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
-		reset-names = "phy", "peripheral";
-	};