diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2020-04-16 14:19:07 +0200 |
|---|---|---|
| committer | Felipe Balbi <balbi@kernel.org> | 2020-05-25 11:09:38 +0300 |
| commit | 40f6706862c4c99c7432cd2a99404fb70a876c55 (patch) | |
| tree | 99c306ba580db509cb2783bd66f51ef57dceeb9c /Documentation/devicetree/bindings/phy | |
| parent | 3245a5229c3fcac1fd5bd57fac8eb0853b1d2b6c (diff) | |
phy: amlogic: meson-gxl-usb3: remove code for non-existing PHY
The registers which are managed by the meson-gxl-usb3 PHY driver are
actually "USB control" registers (which are "glue" registers which
manage OTG detection and routing of the OTG capable port between the
DWC2 peripheral-only controller and the DWC3 host-only controller).
Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usb
driver supports the USB control registers on GXL and GXM SoCs (these
were previously managed by the meson-gxl-usb3 PHY driver).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/phy')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt | 31 |
1 files changed, 0 insertions, 31 deletions
diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt deleted file mode 100644 index 114947e1de3d..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding - -Required properties: -- compatible: Should be "amlogic,meson-gxl-usb3-phy" -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- reg: The base address and length of the registers -- interrupts: the interrupt specifier for the OTG detection -- clocks: phandles to the clocks for - - the USB3 PHY - - and peripheral mode/OTG detection -- clock-names: must contain "phy" and "peripheral" -- resets: phandle to the reset lines for: - - the USB3 PHY and - - peripheral mode/OTG detection -- reset-names: must contain "phy" and "peripheral" - -Optional properties: -- phy-supply: see phy-bindings.txt in this directory - - -Example: - usb3_phy0: phy@78080 { - compatible = "amlogic,meson-gxl-usb3-phy"; - #phy-cells = <0>; - reg = <0x0 0x78080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "phy", "peripheral"; - resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; - reset-names = "phy", "peripheral"; - }; |