Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here are the large set of USB and PHY driver updates for 5.8-rc1.

  Nothing huge, just lots of little things:

   - USB gadget fixes and additions all over the place

   - new PHY drivers

   - PHY driver fixes and updates

   - XHCI driver updates

   - musb driver updates

   - more USB-serial driver ids added

   - various USB quirks added

   - thunderbolt minor updates and fixes

   - typec updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
  usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
  Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
  Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
  USB: serial: ch341: fix lockup of devices with limited prescaler
  USB: serial: ch341: add basis for quirk detection
  CDC-ACM: heed quirk also in error handling
  USB: serial: option: add Telit LE910C1-EUX compositions
  usb: musb: Fix runtime PM imbalance on error
  usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  usb: musb: use true for 'use_dma'
  usb: musb: start session in resume for host port
  usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  USB: serial: qcserial: add DW5816e QDL support
  thunderbolt: Add trivial .shutdown
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  ...

1 files changed, 0 insertions, 52 deletions

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b9a592..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,r8a77965-usb3-phy" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
-  - The funcional clock must be "usb3-if".
-  - The usb3's external clock must be "usb3s_clk".
-  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
-    the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
-		     the following values as u32:
-			- 0 (or the property doesn't exist): disable the ssc
-			- 4980: enable the ssc as -4980 ppm
-			- 4492: enable the ssc as -4492 ppm
-			- 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
-	usb-phy@e65ee000 {
-		compatible = "renesas,r8a7795-usb3-phy",
-			     "renesas,rcar-gen3-usb3-phy";
-		reg = <0 0xe65ee000 0 0x90>;
-		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
-		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
-	};