diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-11 10:44:22 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-11 10:44:22 -0700 |
commit | 9786e34e0a6055dbd1b46e16dfa791ac2b3da289 (patch) | |
tree | 0151608bdb134bec3a59748f40c67324798a224e /Documentation/devicetree/bindings/mtd/gpio-control-nand.txt | |
parent | 791a9a666d1afe2603bcb2c6a4852d684e879252 (diff) | |
parent | a9402889f41cc2db7a9b162990bef271be098ff0 (diff) |
Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"NAND, from Boris:
- some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
davinci, brcmnand, omap)
- a huge cleanup/rework of the denali driver accompanied with core
fixes/improvements to simplify the driver code
- a complete rewrite of the atmel driver to support new DT bindings
make future evolution easier
- the addition of per-vendor detection/initialization steps to avoid
extending the nand_ids table with more extended-id entries
SPI NOR, from Cyrille:
- fixes in the hisi, intel and Mediatek SPI controller drivers
- fixes to some SPI flash memories not supporting the Chip Erase
command.
- add support to some new memory parts (Winbond, Macronix, Micron,
ESMT).
- add new driver for the STM32 QSPI controller
And a few fixes for Gemini and Versatile platforms on physmap-of"
* tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits)
MAINTAINERS: Update NAND subsystem git repositories
mtd: nand: gpio: update binding
mtd: nand: add ooblayout for old hamming layout
mtd: oxnas_nand: Allocating more than necessary in probe()
dt-bindings: mtd: Document the STM32 QSPI bindings
mtd: mtk-nor: set controller's address width according to nor flash
mtd: spi-nor: add driver for STM32 quad spi flash controller
mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
mtd: nand: davinci: add comment on NAND subpage write status on keystone
mtd: nand: omap2: Fix partition creation via cmdline mtdparts
mtd: nand: NULL terminate a of_device_id table
mtd: nand: Fix a couple error codes
mtd: nand: allow drivers to request minimum alignment for passed buffer
mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
mtd: nand: denali: allow to override revision number
mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
mtd: nand: denali_dt: remove dma-mask DT property
mtd: nand: denali: support 64bit capable DMA engine
mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
mtd: nand: denali: support HW_ECC_FIXUP capability
...
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/gpio-control-nand.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mtd/gpio-control-nand.txt | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt index af8915b41ccf..486a17d533d7 100644 --- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt @@ -12,7 +12,7 @@ Required properties: - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. - gpios : Specifies the GPIO pins to control the NAND device. The order of - GPIO references is: RDY, nCE, ALE, CLE, and an optional nWP. + GPIO references is: RDY, nCE, ALE, CLE, and nWP. nCE and nWP are optional. Optional properties: - bank-width : Width (in bytes) of the device. If not present, the width @@ -36,7 +36,7 @@ gpio-nand@1,0 { #address-cells = <1>; #size-cells = <1>; gpios = <&banka 1 0>, /* RDY */ - <&banka 2 0>, /* nCE */ + <0>, /* nCE */ <&banka 3 0>, /* ALE */ <&banka 4 0>, /* CLE */ <0>; /* nWP */ |