summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-09 10:33:19 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-09 10:33:19 -0700
commitef9a61bef917e38f8e096f6df303329aed6cf467 (patch)
tree31cfe2444d0270e77ff8ef792df11591fed6075c /Documentation/devicetree/bindings/mtd/fsmc-nand.txt
parentb5f0998cae3d7ea56d3d8377e46328fe972b9546 (diff)
parent6c3b88970175e18a67eb8e55c4eba10614d0d5dc (diff)
Merge tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd
Pull mtd updates from David Woodhouse: - factor out common code from MTD tests - nand-gpio cleanup and portability to non-ARM - m25p80 support for 4-byte addressing chips, other new chips - pxa3xx cleanup and support for new platforms - remove obsolete alauda, octagon-5066 drivers - erase/write support for bcm47xxsflash - improve detection of ECC requirements for NAND, controller setup - NFC acceleration support for atmel-nand, read/write via SRAM - etc * tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd: (184 commits) mtd: chips: Add support for PMC SPI Flash chips in m25p80.c mtd: ofpart: use for_each_child_of_node() macro mtd: mtdswap: replace strict_strtoul() with kstrtoul() mtd cs553x_nand: use kzalloc() instead of memset mtd: atmel_nand: fix error return code in atmel_nand_probe() mtd: bcm47xxsflash: writing support mtd: bcm47xxsflash: implement erasing support mtd: bcm47xxsflash: convert to module_platform_driver instead of init/exit mtd: bcm47xxsflash: convert kzalloc to avoid invalid access mtd: remove alauda driver mtd: nand: mxc_nand: mark 'const' properly mtd: maps: cfi_flagadm: add missing __iomem annotation mtd: spear_smi: add missing __iomem annotation mtd: r852: Staticize local symbols mtd: nandsim: Staticize local symbols mtd: impa7: add missing __iomem annotation mtd: sm_ftl: Staticize local symbols mtd: m25p80: add support for mr25h10 mtd: m25p80: make CONFIG_M25PXX_USE_FAST_READ safe to enable mtd: m25p80: Pass flags through CAT25_INFO macro ...
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/fsmc-nand.txt')
-rw-r--r--Documentation/devicetree/bindings/mtd/fsmc-nand.txt25
1 files changed, 24 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index 2240ac09f6ba..ec42935f3908 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -1,4 +1,5 @@
-* FSMC NAND
+ST Microelectronics Flexible Static Memory Controller (FSMC)
+NAND Interface
Required properties:
- compatible : "st,spear600-fsmc-nand", "stericsson,fsmc-nand"
@@ -9,6 +10,26 @@ Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- timings: array of 6 bytes for NAND timings. The meanings of these bytes
+ are:
+ byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
+ are valid. Zero means one clockcycle, 15 means 16 clock
+ cycles.
+ byte 1 TAR : ALE to RE delay, 4 bits are valid. Same format as TCLR.
+ byte 2 THIZ : number of HCLK clock cycles during which the data bus is
+ kept in Hi-Z (tristate) after the start of a write access.
+ Only valid for write transactions. Zero means zero cycles,
+ 255 means 255 cycles.
+ byte 3 THOLD : number of HCLK clock cycles to hold the address (and data
+ when writing) after the command deassertation. Zero means
+ one cycle, 255 means 256 cycles.
+ byte 4 TWAIT : number of HCLK clock cycles to assert the command to the
+ NAND flash in response to SMWAITn. Zero means 1 cycle,
+ 255 means 256 cycles.
+ byte 5 TSET : number of HCLK clock cycles to assert the address before the
+ command is asserted. Zero means one cycle, 255 means 256
+ cycles.
+- bank: default NAND bank to use (0-3 are valid, 0 is the default).
Example:
@@ -24,6 +45,8 @@ Example:
bank-width = <1>;
nand-skip-bbtscan;
+ timings = /bits/ 8 <0 0 0 2 3 0>;
+ bank = <1>;
partition@0 {
...