diff options
author | Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> | 2018-04-14 07:56:56 -0400 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2018-04-20 09:30:59 -0400 |
commit | a8966fb29e65340c303450aa4dad68af3c34a93c (patch) | |
tree | b8feaa9d0d2095ef584df783106c01dee377026b /Documentation/devicetree/bindings/media/rcar_vin.txt | |
parent | 1d14a5eaa156b0b3898c749fb3f9da1ebbc3f4aa (diff) |
media: rcar-vin: add Gen3 devicetree bindings documentation
Document the devicetree bindings for the CSI-2 inputs available on Gen3.
There is a need to add a custom property 'renesas,id' and to define
which CSI-2 input is described in which endpoint under the port@1 node.
This information is needed since there are a set of predefined routes
between each VIN and CSI-2 block. This routing table will be kept
inside the driver but in order for it to act on it it must know which
VIN and CSI-2 is which.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'Documentation/devicetree/bindings/media/rcar_vin.txt')
-rw-r--r-- | Documentation/devicetree/bindings/media/rcar_vin.txt | 118 |
1 files changed, 106 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index 4c76d82905c9..ba31431d4b1f 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin) ------------------------------------------- The rcar_vin device provides video input capabilities for the Renesas R-Car -family of devices. The current blocks are always slaves and suppot one input -channel which can be either RGB, YUYV or BT656. +family of devices. + +Each VIN instance has a single parallel input that supports RGB and YUV video, +with both external synchronization and BT.656 synchronization for the latter. +Depending on the instance the VIN input is connected to external SoC pins, or +on Gen3 platforms to a CSI-2 receiver. - compatible: Must be one or more of the following - "renesas,vin-r8a7743" for the R8A7743 device @@ -16,6 +20,8 @@ channel which can be either RGB, YUYV or BT656. - "renesas,vin-r8a7793" for the R8A7793 device - "renesas,vin-r8a7794" for the R8A7794 device - "renesas,vin-r8a7795" for the R8A7795 device + - "renesas,vin-r8a7796" for the R8A7796 device + - "renesas,vin-r8a77970" for the R8A77970 device - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device. @@ -31,21 +37,38 @@ channel which can be either RGB, YUYV or BT656. Additionally, an alias named vinX will need to be created to specify which video input device this is. -The per-board settings: +The per-board settings Gen2 platforms: - port sub-node describing a single endpoint connected to the vin as described in video-interfaces.txt[1]. Only the first one will be considered as each vin interface has one input port. - These settings are used to work out video input format and widths - into the system. +The per-board settings Gen3 platforms: + +Gen3 platforms can support both a single connected parallel input source +from external SoC pins (port0) and/or multiple parallel input sources +from local SoC CSI-2 receivers (port1) depending on SoC. +- renesas,id - ID number of the VIN, VINx in the documentation. +- ports + - port 0 - sub-node describing a single endpoint connected to the VIN + from external SoC pins described in video-interfaces.txt[1]. + Describing more then one endpoint in port 0 is invalid. Only VIN + instances that are connected to external pins should have port 0. + - port 1 - sub-nodes describing one or more endpoints connected to + the VIN from local SoC CSI-2 receivers. The endpoint numbers must + use the following schema. -Device node example -------------------- + - Endpoint 0 - sub-node describing the endpoint connected to CSI20 + - Endpoint 1 - sub-node describing the endpoint connected to CSI21 + - Endpoint 2 - sub-node describing the endpoint connected to CSI40 + - Endpoint 3 - sub-node describing the endpoint connected to CSI41 - aliases { - vin0 = &vin0; - }; +Device node example for Gen2 platforms +-------------------------------------- + + aliases { + vin0 = &vin0; + }; vin0: vin@e6ef0000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; @@ -55,8 +78,8 @@ Device node example status = "disabled"; }; -Board setup example (vin1 composite video input) ------------------------------------------------- +Board setup example for Gen2 platforms (vin1 composite video input) +------------------------------------------------------------------- &i2c2 { status = "okay"; @@ -95,6 +118,77 @@ Board setup example (vin1 composite video input) }; }; +Device node example for Gen3 platforms +-------------------------------------- + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7795"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi20vin0>; + }; + vin0csi21: endpoint@1 { + reg = <1>; + remote-endpoint= <&csi21vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + csi20: csi2@fea80000 { + compatible = "renesas,r8a7795-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 714>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + csi20_in: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&adv7482_txb>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + }; + }; + }; [1] video-interfaces.txt common video media interface |