Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - A new driver for the power management controller on TI Keystone

   - Support for the prerelease "SCPI" firmware protocol that ended up
     being shipped by Amlogic in their GXBB SoC.

   - A soc_device can now be matched using a glob from inside the
     kernel, when another driver wants to know the specific chip it is
     running on and cannot find out from DT, firmware or hardware.

   - Renesas SoCs now support identification through the soc_device
     interface, both in user space and kernel.

   - Renesas r8a7743 and r8a7745 gain support for their system
     controller

   - A new checking module for the ARM "PSCI" (not to be confused with
     "SCPI" mentioned above) firmware interface.

   - A new driver for the Tegra GMI memory interface

   - Support for the Tegra firmware interfaces with their power
     management controllers

  As usual, the updates for the reset controller framework are merged
  here, as they tend to touch multiple SoCs as well, including a new
  driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
  interface.

  The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
  Rockchips SoCs see some further updates"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  misc: sram: remove useless #ifdef
  drivers: psci: Allow PSCI node to be disabled
  drivers: psci: PSCI checker module
  soc: renesas: Identify SoC and register with the SoC bus
  firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
  firmware: qcom: scm: Remove core, iface and bus clocks dependency
  dt-bindings: firmware: scm: Add MSM8996 DT bindings
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
  ARM: shmobile: Document DT bindings for Product Register
  soc: renesas: rcar-sysc: add R8A7745 support
  reset: Add Tegra BPMP reset driver
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  ...

1 files changed, 108 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
new file mode 100644
index 000000000000..e821e16ad65b
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
@@ -0,0 +1,108 @@
+NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+The BPMP is a specific processor in Tegra chip, which is designed for
+booting process handling and offloading the power management, clock
+management, and reset control tasks from the CPU. The binding document
+defines the resources that would be used by the BPMP firmware driver,
+which can create the interprocessor communication (IPC) between the CPU
+and BPMP.
+
+Required properties:
+- name : Should be bpmp
+- compatible
+    Array of strings
+    One of:
+    - "nvidia,tegra186-bpmp"
+- mboxes : The phandle of mailbox controller and the mailbox specifier.
+- shmem : List of the phandle of the TX and RX shared memory area that
+	  the IPC between CPU and BPMP is based on.
+- #clock-cells : Should be 1.
+- #power-domain-cells : Should be 1.
+- #reset-cells : Should be 1.
+
+This node is a mailbox consumer. See the following files for details of
+the mailbox subsystem, and the specifiers implemented by the relevant
+provider(s):
+
+- .../mailbox/mailbox.txt
+- .../mailbox/nvidia,tegra186-hsp.txt
+
+This node is a clock, power domain, and reset provider. See the following
+files for general documentation of those features, and the specifiers
+implemented by this node:
+
+- .../clock/clock-bindings.txt
+- <dt-bindings/clock/tegra186-clock.h>
+- ../power/power_domain.txt
+- <dt-bindings/power/tegra186-powergate.h>
+- .../reset/reset.txt
+- <dt-bindings/reset/tegra186-reset.h>
+
+The BPMP implements some services which must be represented by separate nodes.
+For example, it can provide access to certain I2C controllers, and the I2C
+bindings represent each I2C controller as a device tree node. Such nodes should
+be nested directly inside the main BPMP node.
+
+Software can determine whether a child node of the BPMP node represents a device
+by checking for a compatible property. Any node with a compatible property
+represents a device that can be instantiated. Nodes without a compatible
+property may be used to provide configuration information regarding the BPMP
+itself, although no such configuration nodes are currently defined by this
+binding.
+
+The BPMP firmware defines no single global name-/numbering-space for such
+services. Put another way, the numbering scheme for I2C buses is distinct from
+the numbering scheme for any other service the BPMP may provide (e.g. a future
+hypothetical SPI bus service). As such, child device nodes will have no reg
+property, and the BPMP node will have no #address-cells or #size-cells property.
+
+The shared memory bindings for BPMP
+-----------------------------------
+
+The shared memory area for the IPC TX and RX between CPU and BPMP are
+predefined and work on top of sysram, which is an SRAM inside the chip.
+
+See ".../sram/sram.txt" for the bindings.
+
+Example:
+
+hsp_top0: hsp@03c00000 {
+	...
+	#mbox-cells = <2>;
+};
+
+sysram@30000000 {
+	compatible = "nvidia,tegra186-sysram", "mmio-sram";
+	reg = <0x0 0x30000000 0x0 0x50000>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+
+	cpu_bpmp_tx: shmem@4e000 {
+		compatible = "nvidia,tegra186-bpmp-shmem";
+		reg = <0x0 0x4e000 0x0 0x1000>;
+		label = "cpu-bpmp-tx";
+		pool;
+	};
+
+	cpu_bpmp_rx: shmem@4f000 {
+		compatible = "nvidia,tegra186-bpmp-shmem";
+		reg = <0x0 0x4f000 0x0 0x1000>;
+		label = "cpu-bpmp-rx";
+		pool;
+	};
+};
+
+bpmp {
+	compatible = "nvidia,tegra186-bpmp";
+	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
+	shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+	#clock-cells = <1>;
+	#power-domain-cells = <1>;
+	#reset-cells = <1>;
+
+	i2c {
+		compatible = "...";
+		...
+	};
+};